Collection: Mitsubishi Triton Accessories

Plan a complete Mitsubishi Triton build in one place, from canopies, roller shutters and hard lids to towbars, bull bars, roof platforms and tailgate upgrades. Fitment is grouped by series code, covering ML and MN, MQ and MR, and the MV sold since 2024.

Showing products for your

Showing 213 of 213 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Find Your Triton Series Code First

Our range spans three Triton generations and five series codes, and very few body parts swap between generations. Our product titles use Mitsubishi's series codes rather than model names, so match yours before you shop.

  • ML and MN, 2006 to 2015. The older body is still covered for towbars, trailer wiring and backbone mount roof platforms, plus heavy duty steel and aluminium canopies for MN utes built from 08/2009.
  • MQ, 2015 to late 2018. The fifth generation arrived with a 2.4 litre MIVEC turbo diesel making 133 kW and 430 Nm.
  • MR, late 2018 to early 2024. Mitsubishi restyled the nose and added a six speed automatic for 2019. That is why bull bars, nudge bars, bonnet protectors and flares are listed for MR on its own, while most tub gear carries a shared MQ MR fitment of 2015 to 01/2024.
  • MV, February 2024 on. The sixth generation has a new body and ladder frame and a 2.4 litre bi turbo diesel rated at 150 kW and 470 Nm. Its dual cab tub grew 35 mm to 1,555 mm long and sits 45 mm lower at 820 mm, so MQ MR tub items will not carry over.

Utes built around the changeover deserve a look at the compliance plate before ordering, because many titles split at 01/2024 and our MV canopies and side steps start at 02/2024.

Settle the Sports Bar Before the Tub Cover

On a Triton, the sports bar and the tub cover are one decision. HSP builds separate Roll R Series 3.5 electric shutters for the MV with the genuine sports bar, the genuine sailplane, HSP's own Armour sports bar or no bar at all, and its MQ MR shutters split between a genuine bar and none. The MV GSR leaves the factory with a styling bar and roof rails, so GSR owners should pick a shutter marked compatible with the sailplane, such as the Oztrax GSR version. Electric shutters from Oztrax and EGR Rolltrac, and manual shutters from Oz and EGR, are listed for both MQ MR and MV in the Triton roller shutter lineup.

HSP's load bars are made to suit the Roll R cover, so they only belong on the build once that shutter is fitted.

If the tub is for tools and gear that need to stay dry and locked, a canopy replaces the cover question entirely. Canopies for your Triton include dual cab and club cab versions for MQ MR with lift up or sliding side windows and central locking, an MV dual cab version from 02/2024, heavy duty steel (with a low profile MV model) and heavy duty aluminium canopies in black for MN, MQ MR and MV, EGR's Premium canopy for the MQ MR dual cab and its GEN3 canopy with dual lift windows for the MV.

For a flat lid that still locks, the Triton hard lid range covers black aluminium lids from Oz Canopies & 4x4 for MQ MR, MV dual cab and MV Club Cab, EGR Load Shield lids in matte black, and EGR one piece and three piece lids for MQ MR that arrive unpainted so they can be colour matched.

Inside the Tub and at the Tailgate

Check your spec before buying a liner, because the MV GLS includes a bed liner from the factory. Dual cab liners are listed for MQ MR and MV, alongside HSP Load Slides for each dual cab body and dust seal kits for the MQ and MV. The HSP tail assist is where the series differ most: the MQ kit is a single strut that dampens only, while MR and MV kits use two struts for weight reduction and dampening. Find all of it among the Triton tub and storage accessories.

Tailgate central locking is split by trim as well as series. The small handle kit suits MQ and MR GLX and GLX-R utes, a separate kit covers MR GLS, GLS Premium and GSR, and HSP's Tail Lock comes in a narrow handle version for MQ MR and a wide handle version for MR. The MV has a plug and play kit and its own HSP lock. Look at the handle on your tailgate, then choose from the tailgate locking kits for the Triton.

Towing Hardware by Series

The MV is rated to tow 3,500 kg braked, up from 3,100 kg for the MR it replaced, and Mitsubishi enlarged and reinforced its rear bumper corners so they work as a step. Our MV towbars follow that bumper choice: TAG heavy duty bars with or without the rear bumper step, a TAG extreme recovery bar for the styleside ute, a TAG recovery bar for cab chassis without a bumper, a BTA heavy duty bar and our own bar for tub or tray backs. MQ MR utes have tray back and tub body bars plus a TAG extreme recovery tray back bar, and the ML MN bar suits a tray or tub without a step. Compare them under Triton towbars.

Trailer wiring changes at the MR. Looms with an ECU suit MR utes from 10/2018 and the MV, while the ML, MN and MQ loom uses relays, so order from Triton trailer wiring looms by build date. A canopy, fridge, water and the trailer's ball weight all come out of payload, and Mitsubishi quotes around 1,030 kg for the MV GSR.

Front Protection, Steps and Styling

Front protection is generation specific. ROCKARMOR GT bull bars are listed for MQ (04/2015 to 11/2018), MR (12/2018 to 2023) and MV, with a sensor compatible ADR approved bar for MR from 2019, all in bull bars for the Triton. Nudge bars cover the MQ with a bash plate, the MR in matte black or chrome, and the MV in sensor compatible matte black.

Triton side steps come in heavy duty aluminium or Stingray super heavy duty steel for MQ MR and MV. Bolt on and smooth style flares, plus EGR flares colour coded or in smooth matte black, are listed for MR and MV under MR and MV fender flares, although the MV GSR already wears wheel arch mouldings. Bonnet scoops for MR and MV, MQ MR door cladding, weather shields and bonnet protectors finish the exterior.

Roof Load Options

Backbone style mount platform kits cover ML MN, MQ MR and MV, and Prorack Aero Deck platforms are listed for 2015 to 01/2024 and 01/2024 on. Prorack cross bars for the MV are listed for the GSR only, a grade that comes with factory roof rails, while MQ MR bars come in standard or heavy duty. Start with Triton roof platforms. The EVC iDrive throttle controller covers MQ, MR and MV, and the Pajero Sport as well.

Fitting and Delivery

Expert fitting in NSW is available at our showroom, or have parts delivered anywhere in Australia. A photo of the compliance plate lets us confirm the series before you order.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

My Triton was built in January 2024. Do I order MR or MV parts?

Go by the body, not the sale date. Many titles change over at 01/2024 and our MV canopies and side steps start at 02/2024, so send us the compliance plate and we will confirm which series you have.

Will accessories for an MQ fit my MR?

Most tub items share one MQ MR fitment, including canopies, hard lids, shutters, liners and towbars. The nose is different, so bull bars, nudge bars, bonnet protectors and flares are listed for MR alone, and the tail assist moves from a single strut on MQ to two struts on MR.

Which roller shutter works with the GSR's factory bar?

Choose one listed as compatible with the sailplane, such as the Oztrax MV GSR electric or manual shutter, or the HSP Roll R version made for the genuine sailplane.

How much can I tow with a Triton?

The MV is rated at 3,500 kg braked and the MR at 3,100 kg. Fit the towbar and loom made for your series, and keep the loaded ute and trailer inside Mitsubishi's payload and combination limits.

Can I fit roof bars to an MV GLX or GLS?

The Prorack cross bars we list for the MV are for the GSR only. For other MV grades, look at the backbone style mount platform kit or the Prorack Aero Deck listed from 01/2024.

Is there a canopy or lid for the Club Cab?

Yes. There is a club cab canopy for MQ MR utes from 2015 to 01/2024, and an Oz Canopies & 4x4 aluminium hard lid for the MV Club Cab.

Which tailgate locking kit suits my GLX-R?

MQ and MR GLX and GLX-R utes take the small handle kit, or the HSP Tail Lock for the narrow handle. GLS, GLS Premium and GSR utes from 2018 use a different kit.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.