Collection: Nissan Navara Towbars and Towing

Towbars, a recovery bar and plug in trailer looms for the Navara D22, D40 and D23 NP300, sorted by build date and by whether your ute wears the factory tub with its step or a tray. Plan bar, wiring and hitch as one job.

Showing products for your

Showing 15 of 15 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Three Navara Generations Ready to Tow

Our Navara towing gear spans three generations, and almost nothing crosses from one to the next. The D22, which Nissan kept selling alongside the D40 for years, has a bar listed for utes built from 1997 to 10/2015. The D40 is covered from 10/2005 to 06/2015. The D23 NP300 runs from 2015 until 03/2026 and has by far the widest choice, because it is the Navara we most often see with a trailer behind it.

Driving a new D27? Nothing in this collection names it, so send us a photo of the build plate before buying a trailer or a bar, and we will check what suits your ute.

Tub, Step or Tray Decides the D23 Bar

On a D23 the body behind the cab narrows the choice more than the grade does. Utes built from 2015 to 12/2020 take one bar that fits either the factory tub with its step or a tray. From 12/2020 the listings split. TAG+ is made only for the tub with the step, while the plain TAG bar is only for tray backs. Order the version meant for the other body and it simply will not bolt up.

BTA's bar ignores that split and suits tub or tray across the whole D23 run. That makes it a tidy pick for a fleet manager with utes from both sides of the facelift, and for an owner who bought a tub ute and later swapped it for an alloy tray.

The older utes are simpler. The D40 bar and the D22 bar each suit a tub with the factory step or a tray back.

Recovery Bar for D23 Tray Backs

Tray back owners who work off the bitumen can choose TAG's Extreme Recovery towbar, listed from 03/2015 to 03/2026. It is built to take recovery loads at the rear, so straps and shackles connect to the bar's own recovery points. Never hook a snatch strap to a tow ball. A ball is made to pull a rolling trailer, not to absorb the shock of a recovery, and one that lets go becomes a projectile.

Plug In Wiring for D23 and D40

Trailer lights run through a Plug N Play loom matched to your generation. The D23 loom spans 2015 to 03/2026, so early and facelift utes take the same part. The D40 loom covers 10/2005 to 06/2015 and includes an ECU module, which gives the trailer lamps their own supply instead of drawing on the ute's lighting circuits. Both connect to factory plugs, so no wires are cut. Find them under Navara trailer wiring, or see looms for other makes if a second family vehicle tows as well.

A caravan or heavy box trailer with electric brakes also needs a brake controller in the cab, so mention it when you order.

Ball Height on a Coil Sprung Ute

The bar is the frame, but the trailer actually meets the ute at the tow ball mount, ball and pin. D23 dual cabs ride on coil springs at the rear and settle under a heavy ball load, so measure with the ute packed the way it will be on the day, then choose a mount whose drop or rise brings the coupling level. If a boat trailer and a camper share the ute, an adjustable mount saves swapping parts. Weight distribution shanks, hitch extenders and receiver covers sit in hitch accessories. Every piece carries its own rating, and the lowest one sets your limit.

Working Inside the Navara's Ratings

D23 utes are rated at 3,500 kg braked, while the D40 reaches 3,000 kg on V6 models and the ST dual cab. Those are trailer limits, and the ute has others. Nissan's D23 towing guide gives a rear axle rating of 1,850 kg, and the ball download lands right on that axle along with whatever sits in the tub. A van loaded with around 10 percent of its weight on the ball puts roughly 300 kg there at 3,000 kg, before you count a steel canopy, a toolbox and two passengers.

Rather than guess, take the loaded ute and trailer over a public weighbridge before the first long trip, and shift heavy gear toward the headboard if the rear axle is close to its figure. A trailer over 2,000 kg also needs brakes the driver can apply from the seat, which in practice means electric brakes and a controller.

Fitting Navara Towing Gear at South Windsor

NSW customers can have the bar, loom and ball mount fitted together at our workshop, with the height set for the trailer and every lamp tested before the ute goes home. Parts also ship across NSW and the rest of Australia for owners who fit their own. Start with Navara towbar options, or look across our towbar range and every towing category.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

My D23 was built in 01/2021 and runs a tray. Which bar suits it?

The TAG bar made for tray backs from 12/2020, the BTA bar that covers the whole D23 run, or TAG's Extreme Recovery bar if you want recovery points at the rear. TAG+ is for tub utes with the step only.

Is there towing gear for the D27 Navara?

Not in this collection. Our Navara towbars and looms stop at 03/2026, when the D27 arrived. Call us with your build plate and we will check what suits it.

Can my D40 tow 3,500 kg?

No. The D40 tops out at 3,000 kg braked on the V6 and the ST dual cab, and some variants are rated lower. Your compliance plate or owner's manual gives the exact figure.

Does the D23 loom suit both early and facelift utes?

Yes. It is listed from 2015 to 03/2026, so it covers D23s built on either side of the 12/2020 change.

Can I use my tow ball for a snatch recovery?

No. A tow ball can fail under shock loading. Use rated recovery points, such as those on TAG's Extreme Recovery towbar, with rated recovery gear.

I still run a D22 on the farm. Can you fit a towbar?

Yes. The D22 bar suits a tub with the step or a tray back on utes built from 1997 to 10/2015.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.