Collection: Mazda BT-50 Storage and Tub Accessories

Tub liners, HSP load slides, tailgate locks, assist kits and an EGR dust seal for the Mazda BT-50 dual cab, split at 08/2020 between the Ranger related ute and the Isuzu built one, with notes for 2025 owners.

Showing products for your

Showing 12 of 12 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

The 2020 Line Through the BT-50 Tub

Mazda changed partners in 2020, and the tub changed with it. The BT-50 sold from 2011 shared its platform with Ford's PX Ranger, while the ute sold since 08/2020 is built by Isuzu on the D-MAX structure. Our liners, slides, locks and assist kits all split at that point, and the dust seal is listed for the newer ute only. Even though the platforms are shared, each tub item here carries a Mazda title, so order by the BT-50 badge rather than the Ford or Isuzu cousin.

Body style matters too. Our liners, slides and HSP tail locks are listed for the dual cab, so a Freestyle Cab or single cab owner should call before ordering any of them.

Work Ute or Weekender

An XT dual cab doing trade work usually needs security and convenience first: a liner to take the knocks, a tailgate lock so tools under a cover are not one handle pull away from walking off, and an assist kit for a tailgate opened all day. A GT or SP that spends weekends on gravel leans the other way, with the dust seal and a slide carrying the fridge near the top of the list. Either way, the parts below go in the same order, so you can start with what matters most and add the rest without undoing earlier work.

Older BT-50 Utes: Check the Liner Before the Slide

On the 2013 to 2020 dual cab, HSP makes its slide in one version shaped for Mazda's genuine tub liner and another for a bare floor, spray on liner or five piece liner. That makes the floor the first decision. Plenty of these utes now wear an aftermarket liner or a coating, so look before you order. If the tub is bare, our liner for 2011 to 08/2020 dual cabs is one way to protect it, and we will point you to the slide version that pairs with it.

The current dual cab has a single HSP slide, so the liner does not change the order there. Compare both generations in BT-50 load slides and the floor coverings in BT-50 tub liners.

What the 2025 Update Brings to the Tub

Mazda's facelift went on sale in January 2025 with an easy down tailgate, and the XTR pickup now leaves the factory with a tub liner. Both affect what you buy. An XTR owner can skip the liner and go straight to the slide and tailgate items. On the tailgate assist side, our HSP listing for the current BT-50 reads 2020 to current, but because Mazda now softens the drop itself, talk to us before adding struts to a 2025 build so you only pay for what the tailgate lacks.

Dust Sealing the Current Shape

EGR's Dust Defence kit is listed for the BT-50 built from 08/2020. Its steel braces and rubber seals line the tailgate opening, and they need to sit on bare metal, so a factory or aftermarket plastic liner is trimmed back at the tailgate end. The SP comes with a manual roller tonneau and sail plane, and the cover is removed while the kit goes in, then refitted. Order it from BT-50 dust seal kits.

Two Ways to Lock the Tailgate

Each generation has a central locking kit and an HSP Tail Lock, and on a BT-50 carrying tools under a lid or shutter, this is often the simplest security gain in the whole build. On the older ute, the kit for 2011 to 08/2020 works with the barrel lock in the tailgate, and HSP covers the 2013 to 2020 dual cab. The current BT-50 has its own kit from 08/2020 and an HSP Tail Lock for the 2020 on dual cab. HSP's lock runs off the factory remote and fits inside the tailgate without drilling. See them all in tailgate central locking for the BT-50.

Lighter Lifting on Both Generations

HSP's BT-50 assist kits take weight off the tailgate as you lift and slow it as it lowers, on the 2013 to 2020 ute and the current one. That is handy on a work ute opened dozens of times a day, and more so once dust seals make the tailgate firmer to close. Browse kits for every ute in tailgate assist kits.

A Sensible Order for a Current BT-50

  1. Liner, unless the XTR already has one.
  2. EGR dust seal, with any tonneau or cover off.
  3. HSP slide on top of the floor.
  4. Tailgate lock and assist, which can be fitted together.

For an older dual cab, the sequence is the same, except step one also decides which slide you buy and there is no dust seal step.

More tub and storage gear for other makes is in storage and tub accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Is there a dust seal kit for my 2018 BT-50?

Not in our listings. The EGR kit we carry suits the BT-50 built from 08/2020, so call us if you own the earlier ute and we can talk through the tub.

My 2025 XTR came with a liner. What should I add first?

Go straight to the slide and tailgate. The current BT-50 slide comes in one version, so there is no liner version to choose, and the lock and assist can be fitted together.

Can I use D-MAX tub accessories on my BT-50?

Order the Mazda listings. The utes share a base structure, but every liner, slide, lock, dust kit and assist kit here is titled for the BT-50, and those are what we match to your tub.

Which tailgate lock suits a 2016 BT-50 with a barrel lock?

The 2011 to 08/2020 kit made for tailgates with a barrel lock, or HSP's Tail Lock for the 2013 to 2020 dual cab.

Do I need a tailgate assist on a 2025 BT-50?

Possibly not, since the facelift has an easy down tailgate from the factory. The HSP kit also takes weight off the lift, so call us and we will help you decide whether that is worth adding.

Does the SP's roller tonneau need to come off for a dust kit?

Yes, for the fitting only. It is removed so the braces can go in around the tailgate opening, then refitted.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.