BT-50 Drawer Systems Guide: Best Drawers, Slides & Storage Layouts

The difference between a BT-50 canopy setup that works and one that drives you crazy is almost always storage. You…

By Chris 26 min read Published Last updated:

BT-50 Drawer Systems Guide: Best Drawers, Slides & Storage Layouts
Table of contents

The difference between a BT-50 canopy setup that works and one that drives you crazy is almost always storage.

You can have the best canopy, the strongest roof rack and the most expensive fridge in the country. But if everything inside the tub is a jumbled pile, you’ll waste five minutes finding the right socket set every morning. And if you’re camping, you’ll spend half of setup time digging through gear to find the stove.

Storage layout isn’t glamorous. It doesn’t get the Instagram likes that a rooftop tent or a set of driving lights does. But it’s the thing you interact with most. You open drawers, pull out slides and reach into storage systems 20 to 30 times a day. If the layout is wrong, every single access point is a minor frustration that compounds over weeks and months.

This guide compares the three main storage layouts for a BT-50 canopy build: drawer systems, tub slides and false floors. It covers what works best for tradies, tourers and mixed use owners, how each option affects your payload and how to plan a layout that actually suits the way you use the ute.

For the full BT-50 build picture, the Mazda BT-50 canopy setup guide covers everything from canopy selection to 12V wiring and build recipes.

Quick answer: what’s the best storage setup for a BT-50?

There’s no single answer. The best storage layout depends on what you carry, how often you access it and whether weight is a concern.

Best for organised touring builds: a drawer system. Drawers keep everything in its place. You know where the cooking gear is, where the recovery kit is and where the first aid kit is, without thinking. For tourers who pack the same way every trip, drawers are hard to beat.

Best for fast access to heavy or bulky gear: a tub slide. A tub slide (cargo slide) pulls the entire tub floor out from the back, giving you full reach to everything without climbing in. Ideal for tradies moving heavy toolboxes, generators or large items.

Best for flexible, mixed use setups: a false floor. A false floor raises the tub surface, creates storage underneath and leaves open space on top for whatever you need to throw in. It’s the most versatile option for owners who switch between work and play loads.

Best all round setup for most owners: a hybrid layout. A single or dual drawer on one side, with open space or a fridge slide on the other. This gives you organisation where it matters and flexibility where you need it.

No single layout wins every category. Drawers improve organisation. Slides improve access. False floors improve flexibility. All three add weight. The right choice depends on how you actually use the ute, not what looks tidiest in a photo.

Why BT-50 storage layout matters more than people think

Storage isn’t just about tidiness. It directly affects how efficient you are on the jobsite, how quickly you set up camp and how much usable payload you have left for actual cargo.

Daily workflow. A tradie who opens the canopy 25 times a day and can’t find the right fitting loses minutes every time. Over a week, that’s hours. Over a year, it’s days. Good storage layout eliminates that waste.

Usable space. A poorly planned layout can actually reduce usable space despite adding hardware. A full dual drawer system that’s too tall eats into the vertical space above the drawers, which might mean your toolbox or fridge no longer fits properly.

Payload. Storage systems aren’t weightless. A dual drawer system can weigh 45 to 80kg before you put a single item in it. On a BT-50 with 1,000kg of payload, that’s 5 to 8% of your capacity gone on the storage hardware alone. If you want to understand how that stacks up, the BT-50 payload and GVM guide walks through the full weight maths.

Fridge access. Where the fridge sits in relation to the drawers, slide and tailgate determines whether you can grab a drink in 10 seconds or have to unload three things first.

Load restraint. Under the NTC Load Restraint Guide, all cargo must be restrained to prevent shifting during braking, acceleration and cornering. A well designed drawer or slide system inherently restrains gear better than loose items sitting on a flat tub floor.

Common mistake: Choosing a storage layout because it looks good in someone else’s build, without thinking about whether it suits your gear, your workflow and your vehicle’s payload.

The three main BT-50 storage layouts explained

What is a drawer system?

A drawer system is a frame that sits on the tub floor with one or more slide out drawers accessed from the tailgate. The top of the frame creates a raised deck surface for additional gear, a fridge or other storage.

Drawer systems are the most popular storage solution in canopy builds because they combine organisation with a usable platform. You can segment gear into categories (tools in one drawer, cooking gear in another, recovery kit in a third) and the raised deck provides a flat surface for a fridge, bags or loose items.

For the BT-50, Mazda offers a genuine tub drawer that’s custom designed for the tub dimensions. It combines a raised deck with an integrated drawer and tie down points. Aftermarket options from brands like Bossco and ARB offer dual drawer configurations with 100kg per drawer load ratings, galvanised steel construction and no drill installation.

Typical weights: 40 to 80kg depending on single vs dual drawer and construction material. The Mazda genuine drawer system weighs approximately 80kg. Aftermarket dual drawer systems like the Bossco range sit around 45 to 55kg.

What is a tub slide?

A tub slide (also called a cargo slide or sliding tray) is a full width platform that slides out from the rear of the tub on heavy duty bearings. When extended, it brings everything on the platform within easy reach from the tailgate, eliminating the need to climb into the tub.

Tub slides are brilliant for heavy or bulky items: toolboxes, generators, large eskies or anything you need to reach without crawling over other gear. They’re simpler than drawer systems (one moving surface instead of multiple segmented drawers) and often have high weight ratings (200 to 300kg for quality units).

Typical weights: 25 to 45kg depending on size and construction.

What is a false floor?

A false floor is a raised platform installed above the tub floor. It creates a flat, elevated surface with accessible storage space underneath (through lift up panels, side access or removable sections).

False floors are lighter and simpler than drawer systems. They don’t segment storage into compartments, which makes them more flexible for odd shaped or varying loads. The underneath space can hold items you don’t need frequent access to, while the flat top surface accommodates whatever you’re carrying that day.

Typical weights: 15 to 30kg depending on material and construction. The lightest option of the three.

Hybrid setups

Most real world BT-50 builds are hybrids rather than pure single layout setups. Common combinations include:

  • One drawer + open floor space: Organisation on one side, flexibility on the other.
  • Drawer system + fridge slide: Drawers for gear, dedicated slide for the fridge on the opposite side or integrated into the drawer platform.
  • False floor + storage tubs/bins: Flat surface with modular bins that can be removed or reconfigured.
  • Tub slide + side shelving: Full width slide for heavy access, with canopy mounted shelves for smaller items.

Hybrids often deliver the best real world result because they balance organisation, access and flexibility instead of committing entirely to one approach.

Drawers vs tub slide vs false floor: head to head comparison

This is the core comparison. Each subsection compares all three layouts directly.

Access and ease of use

Drawers offer the best segmented access. Each drawer slides out independently, so you can reach the specific category of gear you need without disturbing everything else. For tradies with sorted tool kits or tourers with dedicated cooking/camping drawers, this is a significant daily advantage.

Tub slides offer the best whole tub access. The entire platform slides out, bringing everything within arm’s reach. This is faster for grabbing one large item, but slower for finding one small item among a mixed load.

False floors offer the most flexible access. You can lift panels, reach in from the sides or simply load the top surface. But without segmentation organisation depends entirely on how disciplined you are with packing.

Winner for daily workflow: Drawers. Winner for heavy single item access: Tub slide. Winner for adaptability: False floor.

Storage efficiency

Drawers use the tub volume most efficiently by creating both organised under deck storage and a usable top surface. The trade off is that the drawer frame and runners take up space that would otherwise be open tub.

Tub slides don’t segment the space at all. Everything sits on one surface. This means maximum flexibility but minimum organisation.

False floors sit in the middle. They create a useful under floor zone and a flat top surface, but neither is as organised as drawers.

Common mistake: Choosing a dual drawer system that’s too tall for the tub, then discovering the fridge doesn’t fit above the drawers with the canopy on. Always measure the available height above the drawers before committing.

Weight impact

This is a critical comparison for BT-50 owners watching their payload.

Storage Type Typical Weight (empty) Notes
Dual drawer system 45 to 80kg Varies by material and brand
Single drawer 25 to 45kg Lighter, less organisation
Tub slide 25 to 45kg Simple, single moving platform
False floor 15 to 30kg Lightest option
Mazda genuine tub drawer ~80kg Includes integrated deck and tie downs

That weight is before you load anything into it. A dual drawer system loaded with tools, cooking gear and recovery equipment can easily hit 150 to 200kg total. On a BT-50 with roughly 1,000kg of payload, that’s 15 to 20% of your capacity consumed by storage alone.

If payload is tight (and on touring builds, it usually is), the lightest storage option that meets your organisation needs is the smartest choice. A false floor at 20kg gives you 60kg more payload than a heavy dual drawer at 80kg. That’s a full water tank’s worth of difference.

Security and load restraint

Drawers inherently restrain gear because items sit in enclosed compartments that don’t shift during driving. Lockable drawers add security. This is the best option for tradies concerned about tool movement or theft.

Tub slides don’t restrain gear by themselves. Items on the slide surface need to be strapped, netted or boxed to prevent movement. The slide itself is secured, but everything on it can shift if not properly tied down.

False floors have the same challenge as slides. Gear sitting on the flat surface or stored underneath needs proper restraint. Discipline and tie down points are essential.

Under the NTC Load Restraint Guide, all cargo must be restrained so it can’t shift in any direction during normal driving, including emergency braking and cornering. Drawers make this easier by design. Slides and false floors require the owner to be more intentional about load restraint.

Fridge compatibility

Most touring BT-50 builds include a portable fridge and how it integrates with the storage layout matters a lot for daily use.

Drawer + fridge slide combo is the most popular touring layout. The drawers sit on one side or across the full width, with a dedicated fridge slide mounted on top of (or beside) the drawer platform. The fridge slides out from the tailgate for easy camp access.

Tub slide + fridge works if the fridge sits on the slide platform and slides out with everything else. Simple but less organised around the fridge.

False floor + dedicated fridge position uses the flat surface to create a specific spot for the fridge. Less integrated than a drawer/slide combo, but works for simpler setups.

Common mistake: Mounting a fridge behind drawers where it can’t be accessed without fully extending the drawers first. The fridge should be one of the easiest items to reach at camp.

Best for work vs best for touring

For tradies: Drawers work best when tool groups stay consistent (same kit every day). Tub slides work better for tradies carrying heavy, bulky or varying loads. False floors suit trades that carry large flat materials or frequently change what’s in the tub.

For tourers: Drawers are the clear favourite because touring packing tends to be consistent trip after trip. A drawer for cooking gear, a drawer for recovery/tools, a fridge on a slide and open deck space for bags and water. The BT-50 touring canopy setup guide covers how storage fits into a full touring build.

For mixed use: A hybrid layout (one drawer + open space or a false floor + modular bins) gives the flexibility to switch between work and play without redesigning the whole tub.

Drawer systems: when they are the best choice for a BT-50

Drawers are the most popular BT-50 storage solution for good reason. But they’re not automatically the best choice for everyone.

Drawers shine when:

  • Your gear stays relatively fixed trip to trip (same tools, same camping kit)
  • You want to know exactly where everything is without thinking
  • You value quick, segmented access to specific categories of gear
  • You want a flat deck surface on top for a fridge, bags or loose items
  • You hate gear shifting around while driving (drawers keep everything locked in place)

Mazda’s genuine BT-50 tub drawer is purpose designed for the tub dimensions, includes a raised deck with integrated tie down points and lockable compartments. It’s a solid choice if you want guaranteed fitment and OEM quality. The trade off is the weight: approximately 80kg for the system before loading.

Aftermarket options like Bossco’s dual drawer systems offer lighter alternatives (45 to 55kg) with 100kg per drawer load ratings, galvanised steel construction and no drill installation. ARB also offers BT-50 compatible drawer bundles with optional side floor kits and floor extensions that create a flatter, more finished storage deck.

When drawers aren’t ideal: If you regularly carry large, awkward items that don’t fit in standard drawer dimensions (think long pieces of pipe, timber or sheet materials). If your load changes dramatically from day to day. Or if you’re weight conscious and every kilo matters. In these cases, a slide or false floor may serve you better.

At Oz Canopies & 4×4, our steel canopy storage units with two shelves ($650 per side) transform the canopy interior into an organised workstation. Combined with a drawer system on the tub floor, you get segmented access from both the tailgate and the side windows, which is the ideal layout for tradies who need fast organised access all day. The best BT-50 tradie canopy guide covers how drawers fit into a full work setup.

Tub slides: when they make more sense than drawers

A tub slide is about access, not organisation. If your primary problem is “I can’t reach the heavy thing at the front of the tub without climbing in,” a tub slide solves it immediately.

Tub slides shine when:

  • You carry heavy, bulky items that need to come out fully (toolboxes, generators, large containers)
  • You want full width tub access from the tailgate without crawling in
  • You value simplicity over segmentation
  • You carry a single large item (like a fridge or heavy toolbox) that needs to slide out for access
  • You work in an environment where speed of access to heavy gear matters more than tidy compartments

Quality tub slides for the BT-50 handle 200 to 300kg and run on heavy duty roller bearings. They’re simpler to install than drawer systems, lighter in many cases and create a pull out surface that brings everything within arm’s reach.

The trade off: Zero organisation. Everything sitting on the slide surface is loose unless you strap it, box it or contain it yourself. For a tourer who packs neatly, this isn’t a huge issue. For a tradie with 50 small items, it’s a mess.

Best combo: A tub slide as the base, with storage tubs or crates on top. The tubs provide the organisation, the slide provides the access. Simpler and lighter than a full drawer system, though less refined.

False floors and open storage: the underrated option

False floors don’t get the attention they deserve. They’re often dismissed as “just a platform,” but for the right owner, they’re the smartest storage choice.

False floors shine when:

  • You need maximum flexibility for mixed loads
  • Your cargo changes frequently between work and play
  • You want a flat loading surface for large or odd shaped items
  • You want under floor storage for rarely accessed gear (recovery kit, spare parts, first aid)
  • Weight is a concern and you want the lightest storage option
  • You plan to use the tub as a sleeping platform

A basic false floor for a BT-50 weighs 15 to 30kg, about half the weight of a typical drawer system. It creates a dual layer setup: everyday items on top, stowed gear underneath. And because it’s a flat surface, you can load it with crates, soft bags, toolboxes or whatever you need without being constrained by drawer dimensions.

The trade off: Less organised than drawers. Under floor access usually requires lifting panels or reaching in from the sides, which is slower than pulling a drawer. And without built in segmentation, the discipline to pack neatly is on you.

Who should seriously consider a false floor: Mixed use BT-50 owners who carry tools during the week and camping gear on weekends. The false floor stays, but the load on top changes completely. Try doing that with a permanent drawer system full of sorted tools.

Best BT-50 storage layouts by use case

Best setup for touring

Recommended layout: Dual drawer system with a fridge slide integrated into the platform or a single drawer on one side with a fridge slide on the other.

Why: Touring packing is repetitive. You pack the same way every trip. Drawers let you assign locations to gear categories and access them quickly at camp. The fridge on a slide means cold drinks are always 10 seconds away.

Typical touring storage weight: Drawers (45 to 65kg) + fridge slide (15 to 25kg) + fridge loaded (35 to 45kg) + drawer contents (40 to 80kg) = 135 to 215kg of storage related weight in the tub. That’s a meaningful chunk of payload, which is why lighter drawer options and smarter packing make a real difference.

Best setup for tradies

Recommended layout: Tub slide with modular bins for varying daily loads or a single/dual drawer system with canopy mounted side shelving for small parts.

Why: Tradies need fast access to heavy tools and the flexibility to carry different gear depending on the job. A slide lets you pull out the entire load for quick jobsite access. Side shelving (like our $650 per side canopy storage units) keeps small parts, fittings and consumables organised and accessible through the side windows without opening the tailgate.

The drawer option for tradies: Works well for tradies with consistent tool kits (electricians, plumbers, IT techs). Less ideal for builders and carpenters who carry varying large items daily.

Best setup for mixed use owners

Recommended layout: False floor with modular bins and tie down points or a single drawer plus open floor space.

Why: Mixed use owners need the layout to adapt. Work gear during the week, camping kit on the weekend. A false floor or partial drawer system gives you permanent under floor storage (recovery kit, first aid, spare parts) with a flexible top surface that changes with your needs.

Best setup for a fridge plus general gear

Recommended layout: Single drawer on one side with a fridge slide on the other, mounted at tailgate height for easy camp access.

Why: The fridge is the most frequently accessed item in a touring setup. It should never be buried behind drawers or blocked by other gear. A dedicated fridge slide on the passenger side (accessible from the side window at camp) with a drawer on the driver side for tools and cooking gear is a proven layout that works brilliantly in the BT-50 tub width.

Common mistake: Putting the fridge at the front of the tub, behind the drawers, where you can’t reach it without fully extending everything. The fridge should be one of the closest items to the tailgate.

BT-50 drawer system sizing, fitment and install considerations

The BT-50’s tub dimensions (approximately 1,572mm long, 1,530mm wide, about 1,120mm between wheel arches, 490mm deep) are identical to the Isuzu D Max (2020+). This means most D Max compatible drawer systems also fit the BT-50, which significantly expands your options.

Tub vs canopy setup: Drawers typically mount inside the tub, under the canopy. The canopy provides the weather protection; the drawers provide the organisation underneath. Make sure the drawer system height doesn’t prevent the canopy tailgate from closing properly.

Height matters. A dual drawer system that’s 340mm tall eats 340mm of the tub’s 490mm depth. That leaves only 150mm above the drawer deck before you hit the canopy ceiling (which starts at tub height and extends upward). Measure the available internal height with your specific canopy fitted before ordering drawers.

Tub liner compatibility. Some drawer systems require removal of the factory tub liner for proper installation. Others fit over the liner. Check before you buy.

Mounting and tie down planning. Quality drawer systems mount to the tub using existing bolt points or through the tub floor with supplied hardware. No drill systems (like the Bossco range) use clamp brackets. Drill through systems are more secure for heavy duty or off road use.

D Max cross compatibility. Because the BT-50 and D Max share the same tub, drawer systems listed for either vehicle will generally fit both. Always confirm with the manufacturer, but this compatibility significantly widens your product choices. The BT-50 vs D Max accessory compatibility is one of the big advantages of the current platform.

Weight, payload and why storage systems are never “free”

Every storage system adds weight to your BT-50. That weight counts toward your GVM and reduces your available payload for actual cargo, passengers and towball download.

Storage system weight comparison:

System Type Typical Weight (empty) Typical Loaded Weight
Dual drawer system (aftermarket) 45 to 55kg 120 to 200kg
Dual drawer system (genuine Mazda) ~80kg 150 to 250kg
Single drawer system 25 to 40kg 70 to 130kg
Full width tub slide 30 to 45kg 100 to 250kg
False floor 15 to 30kg Variable

That “loaded weight” column is the important one. A 50kg drawer system loaded with 100kg of tools and gear is 150kg of your payload consumed. Add a fridge setup (35 to 55kg loaded) and you’re at 200kg+ just for storage and refrigeration.

On a BT-50 4×4 dual cab with roughly 1,000 to 1,100kg of factory payload, 200kg of storage means 20% of your capacity is dedicated to keeping things tidy. That’s a significant investment and it’s exactly why choosing the lightest system that meets your actual needs matters.

If you’re running a full touring build with drawers, fridge, dual battery, rooftop tent and water, the BT-50 GVM upgrade decision guide covers when a GVM upgrade makes sense to give you more legal payload headroom.

Under the Australian Design Rules (ADRs), your vehicle’s GVM is a hard limit. The storage system, its contents and every other accessory all count toward that limit.

What we recommend at Oz Canopies & 4×4

Storage layout is one of the most personal parts of a BT-50 build. What works for one owner doesn’t work for another. But here’s what we consistently see working well:

For tradies: Our steel canopy storage units ($650 per side, two shelves each) combined with a drawer system on the tub floor give you the best of both worlds. Side access shelving for small parts and fittings, plus drawers for tools and equipment. The shelving is accessible through the canopy lift up side windows, so you don’t need to walk to the tailgate every time.

For tourers: A mid range aftermarket drawer system (45 to 55kg, dual drawer) with a fridge slide is the most popular and practical setup. It keeps weight manageable while giving you genuine organisation.

For mixed use owners: Start with a false floor or a single drawer. Live with it for a few trips and see what you’re missing before committing to a full dual drawer build. You might find a false floor with good bins is all you need.

For everyone: Measure your tub height with the canopy fitted before ordering drawers. Check the system weight against your payload budget. And plan the fridge position before the drawer position, not the other way around.

With 700+ five star Google reviews, we help BT-50 owners plan storage layouts that actually work for their daily routine, not just look good in a catalogue photo.

Brand and product options: what to compare before buying

Genuine and OEM style drawer options

Mazda’s genuine BT-50 tub drawer is custom designed for the tub and includes a raised deck, integrated lockable drawer, tie down points and a waterproof design. It’s the safest fitment choice because it’s guaranteed to match the tub dimensions exactly. The weight (~80kg) and cost are higher than most aftermarket alternatives, but the quality and integration are excellent.

Aftermarket modular drawer systems

Aftermarket options offer more variety in configuration, weight and price.

  • Bossco offers BT-50 specific dual drawer systems in galvanised steel (45 to 55kg) with 100kg per drawer load ratings, powder coated finish and no drill installation. Multiple height configurations available.
  • ARB offers BT-50 compatible drawer bundles with optional side floor kits and floor extensions, allowing you to build a custom modular deck that matches your exact layout needs.
  • UniUte offers a weathertight drawer system designed for the BT-50 with customisable dividers and weather resistant construction.
  • AlfaLab/UniUte offers sliding tray drawers rated to 300kg for owners who want a heavy duty pull out platform.

What actually matters when comparing products

Don’t just compare price. Look at:

  • Weight: How much does the system weigh empty? Heavier systems eat more payload.
  • Drawer load rating: How much weight can each drawer handle? 80 to 150kg per drawer is typical.
  • Deck rating: If the system has a raised top surface, what’s its load rating? This affects what you can stack on top.
  • Usable dimensions: Internal drawer dimensions determine what actually fits inside.
  • Tie down points: Are there integrated tie downs on the deck surface?
  • Warranty and fitment support: Does the manufacturer guarantee fit for your specific BT-50 variant?
  • Compatibility: Does it work with your canopy, tub liner and any other existing accessories?

Common BT-50 storage layout mistakes people make

Choosing drawers before thinking about what goes in them. Start with a list of what you actually carry. Then figure out whether drawers, slides or a false floor suits those items best. Don’t buy drawers because “everyone has drawers.”

Overbuilding a touring layout for weekend use. A full dual drawer system with custom dividers and a dedicated fridge slide is brilliant for someone who camps every weekend and does multi week trips. It’s overkill for someone who camps twice a year. Start simple and upgrade if the simple setup genuinely limits you.

Ignoring the base weight of the storage system. An 80kg drawer system is 80kg of payload before you’ve loaded a single item. If payload is tight, that weight matters. A 20kg false floor leaves 60kg more for actual gear.

Putting the fridge in a bad location. The fridge should be one of the easiest items to reach, ideally on a slide near the tailgate. Burying it behind drawers or at the front of the tub means poor access at every camp.

Sacrificing too much height. A tall drawer system in a BT-50 tub (490mm deep) doesn’t leave much room above the drawers for a fridge, toolbox or other tall items. Measure the total available height with your canopy before committing to a drawer height.

Prioritising “looks tidy” over daily usability. A storage layout that looks perfect in a photo but takes 60 seconds to access everyday items is worse than a simpler layout that gives you what you need in 10 seconds.

Not leaving flexible space for odd shaped gear. Not everything fits neatly in a drawer. Leave some open space for long items, awkward tools, wet gear or spontaneous loads.

Forgetting load restraint. Items on top of drawers, on slides or on false floors still need to be restrained. The NTC Load Restraint Guide applies to everything in the tub, not just stuff on the roof. Unsecured items become projectiles in a sudden stop, which ANCAP safety testing repeatedly highlights as a risk factor.

What’s the best BT-50 storage setup for most owners?

For most BT-50 owners doing a mix of work and weekends, the best storage setup is a hybrid layout: some drawer organisation where it matters, with flexible open space for everything else.

Choose drawers if organisation is your top priority, your gear stays consistent trip to trip and you want segmented access to specific items.

Choose a tub slide if fast access to heavy or bulky gear is the priority, you value simplicity and you don’t need fine grained organisation.

Choose a false floor if flexibility matters most, your loads change frequently, you want the lightest storage option or you plan to use the tub for sleeping.

Choose a hybrid layout if you want the best balance of organisation, access and flexibility. A single drawer plus open space or a drawer plus fridge slide, gives most owners everything they need without overcommitting.

Ready to plan your BT-50 storage layout? Tell us your canopy setup, how you use the ute and what you need to carry. We’ll help you figure out the right storage option, whether that’s drawers, a slide, a false floor or a smart combination.

Call 02 9627 8666, text 0440 130 098 or visit Oz Canopies & 4×4 at 20 Walker St, South Windsor.

FAQs

What is the best drawer system for a BT-50?

It depends on your use case. The Mazda genuine tub drawer offers guaranteed fitment and OEM quality at approximately 80kg. Aftermarket options like Bossco (45 to 55kg) offer lighter weight and lower cost with 100kg per drawer load ratings. For modular touring layouts, ARB’s BT-50 compatible drawer bundles allow side floor and deck extensions. The best choice depends on your weight budget, layout needs and whether you prioritise OEM integration or aftermarket flexibility.

Are drawers better than a tub slide for a Mazda BT-50?

Drawers are better for organisation and segmented access. Tub slides are better for fast whole tub access to heavy or bulky gear. For tradies carrying heavy toolboxes that need to come out quickly, a slide makes more sense. For tourers with consistent packing who want everything in its place, drawers win. Many owners find a hybrid (one drawer plus open space) is the best compromise.

How much weight does a BT-50 drawer system add?

Empty drawer system weights range from about 25kg (single drawer) to 80kg (genuine Mazda dual system). Once loaded with tools, gear or camping equipment, total weight typically hits 100 to 250kg. That weight counts directly toward your BT-50’s GVM and reduces available payload for passengers, cargo and towball download.

Can I fit a fridge with a drawer system in a BT-50?

Yes and it’s one of the most popular touring layouts. The fridge typically sits on a dedicated slide mounted on top of or beside the drawer platform. The key is making sure the combined height of the drawers, fridge and slide fits within the available vertical space under your canopy. Measure before you buy. Position the fridge near the tailgate for easy camp access.

Is a false floor better for mixed use setups?

Often, yes. A false floor gives you maximum flexibility because you can change the load on top without redesigning the layout. Tools during the week, camping gear on the weekend. A full drawer system with sorted compartments is harder to swap between dramatically different loads. False floors are also the lightest option (15 to 30kg), preserving more payload.

Are BT-50 drawer systems worth it for tradies?

For tradies with consistent tool kits (electricians, plumbers, IT), drawers are excellent. For tradies carrying large, bulky or varying loads (builders, landscapers), a tub slide or false floor may be more practical. Either way, adding canopy mounted side shelving for small parts and fittings alongside the drawer system creates the most efficient tradie layout.

Do storage systems reduce payload significantly?

Yes. A dual drawer system at 50 to 80kg plus its contents (60 to 150kg) can consume 110 to 230kg of your payload. On a BT-50 with roughly 1,000kg of factory payload, that’s 11 to 23% of your capacity. Lighter options like false floors (15 to 30kg) reduce this impact significantly. Always factor storage system weight into your BT-50 payload maths.

What should I compare before buying BT-50 drawers?

Compare weight (empty system weight), drawer load rating (kg per drawer), deck rating (what you can stack on top), usable internal dimensions, tie down points, fitment compatibility with your canopy and tub liner, warranty and whether the system suits your primary use (touring, work or mixed). Don’t just compare price. A lighter, well fitted system often delivers better value than the cheapest option.

Can I install a drawer system under a canopy?

Yes. Drawer systems are designed to sit inside the tub, underneath a canopy. The canopy provides weather protection and security; the drawers provide organisation underneath. Make sure the drawer height doesn’t prevent the canopy tailgate from closing and check that the combined height of drawers plus fridge or gear on top works within the canopy’s interior height.

What’s the best storage layout for touring?

A dual drawer system with a fridge slide is the most popular touring layout. Drawers keep gear organised and accessible. The fridge slide gives you easy camp access to cold food and drinks. Pair this with a canopy that has good side access (lift up windows) so you can reach items from the side as well as the tailgate. The BT-50 touring canopy setup guide covers how this fits into a complete touring build.

Quick decision guide: choose your BT-50 storage layout in 60 seconds

Step 1: What do you carry most often?

  • Sorted, consistent gear (tools, camping kit) → Drawers
  • Heavy, bulky single items → Tub slide
  • Varying loads that change weekly → False floor or hybrid

Step 2: How important is weight?

  • Payload is tight → False floor (15 to 30kg) or single drawer (25 to 40kg)
  • Payload is comfortable → Dual drawers (45 to 80kg)

Step 3: Do you run a fridge?

  • Yes → Plan the fridge slide position first, then build the drawer layout around it
  • No → More layout flexibility

Step 4: Work, touring or both?

  • Work → Drawers or slide + canopy shelving
  • Touring → Drawers + fridge slide
  • Both → Hybrid or false floor

Call 02 9627 8666, text 0440 130 098 or visit 20 Walker St, South Windsor.