Collection: Isuzu D-MAX Storage and Tub Accessories

Tub liners, HSP load slides, tailgate locks, a twin strut assist kit and an EGR dust seal for the Isuzu D-MAX dual cab, sorted by the 2012 to 2020 TF and the current ute from 08/2020, X-Terrain included.

Showing products for your

Showing 9 of 9 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Two Generations, and a Facelift That Changes Nothing Here

Isuzu replaced the TF D-MAX in 2020, and our tub gear divides there. Liners, load slides and tailgate locks are made separately for each generation, while the dust seal and tailgate assist kit are listed for the current ute only. The 2024 facelift gave the D-MAX a creased tailgate with a deeper spoiler, yet our listings for the current tub run straight through it, from 08/2020 or 2021 to current. That means a 2021 ute and a 2025 ute take the same tub parts, which makes life easier for fleets running mixed build years.

Know the Tub Before You Fill It

The current dual cab tub measures about 1,570 mm along the floor, 1,530 mm across and 490 mm deep, with 1,122 mm between the wheel arches. Those numbers help when planning a slide with a fridge on it, or working out how much floor a toolbox will leave. TF tubs take their own listings, so match the generation before using any figure.

Think about what lives at the front of the tub. Anything heavy pushed up against the bulkhead, such as a fridge, a compressor or a box of fittings, is the hardest thing to reach without climbing in. That is the case for a slide. Light, bulky gear that rarely comes out can stay on the floor beside it.

The X-Terrain Arrives Half Done

Isuzu's flagship leaves the factory with an under rail plastic liner and a matte black roller tonneau, so it skips the first step most owners take. That changes two things. You do not need to buy a liner, and if you fit a dust seal, the factory liner is trimmed back at the tailgate end and the roller cover comes off while the kit goes in.

Liners and Slides for Each Generation

Other grades can choose from D-MAX bed liners for the TF dual cab from 2012 to 2020 and the current dual cab from 08/2020. HSP's slide comes in one version for 2012 to 2020 dual cabs and one for 2021 on, with no separate genuine liner version, so the liner simply goes in first and the slide sits on top. Compare slides for every ute in load slides.

On an SX or LS grade working for a living, the liner is usually the first spend, since it protects the paint from the day the first load goes in. A slide can follow once you know what gear the ute really carries, and a liner already in place means it drops straight on.

Locking the Tailgate

TF utes from 2015.5 to 2020 can take HSP's Tail Lock. The current D-MAX has a central locking kit from 08/2020 and an HSP Tail Lock from 2021. HSP's lock mounts inside the tailgate and is synced to the factory key, so there is nothing extra to carry. Find both in D-MAX tailgate central locking.

Owners of the earliest TF utes, built before the 2015.5 listing starts, should call us rather than order, as the HSP title does not reach back that far. On an X-Terrain, a locked tailgate matters more than it looks: the factory roller tonneau locks the top of the tub, and the tailgate is the obvious way around it.

Twin Struts for a Heavy Tailgate

The D-MAX tailgate is not counterbalanced from the factory, so it feels heavier to lift than some rivals. HSP's twin strut kit for 2021 on utes tackles both halves of the job, carrying part of the weight on the way up and slowing the drop on the way down. That makes a real difference to anyone opening the tub all day on a job site. See it among the tailgate assist kits.

Dust Seals for the Current Ute

EGR's Dust Defence kit suits the D-MAX built from 08/2020. Steel braces with rubber seals close off the gaps around the tailgate, and they need to touch bare metal, which is why the liner gets trimmed at that end. Fit it before the slide, because a slide or drawers already in the tub have to come out for the kit to go in. Once fitted, the tailgate needs a firmer close, and the twin strut kit helps there. Order it from D-MAX dust seal kits.

Order of Work

  1. Liner first, or keep the X-Terrain's.
  2. Dust seal, with the roller tonneau or any canopy off.
  3. HSP slide on top.
  4. Tail Lock or central locking kit, plus the assist, fitted together.

TF owners follow the same steps, minus the dust seal and assist kit, which are not listed for that generation. Fleets running current D-MAX utes from 2021 on can order one parts list for the lot, as the 2024 facelift does not split these listings.

For tub gear on other utes, see storage and tub accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

I have an X-Terrain. Do I need a tub liner?

No. It comes with an under rail plastic liner from the factory. Keep it, and trim it at the tailgate end if you add the EGR dust seal.

Is there a dust seal or tail assist for my 2018 D-MAX?

Not in our listings. Both are made for the current D-MAX, so call us and we will talk through what suits a TF.

Do 2024 facelift utes need different tub parts?

Not for the items here. Our liner, slide, locks, dust seal and assist kit for the current D-MAX are listed through to current builds.

Which tailgate lock suits a 2017 D-MAX?

HSP's Tail Lock for 2015.5 to 2020 utes. The central locking kit and the later HSP lock are for the current generation.

Does the HSP slide suit the Space Cab?

Our slide listings are for dual cab D-MAX utes in both generations. Call us about a Space Cab before ordering.

My tailgate feels heavy. Which kit fixes that?

HSP's twin strut kit for 2021 on utes. It takes weight off the lift and slows the drop, which a damper alone would not do.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.