Collection: Body Styling Accessories

Matte black bonnet scoops, lower door cladding and Next Gen Ranger tail light covers for popular utes, plus EGR Protection Packs that bundle bonnet, headlight and window protection for SUVs and the first Amarok. Each part is made for a specific model and generation.

Showing products for your

Showing 20 of 20 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Styling Parts Built Around Specific Models

This collection gathers four kinds of exterior parts: bonnet scoops, door cladding, tail light covers and EGR Protection Packs. Some are mostly about looks, some are mostly about protecting paint, and several do a bit of both. What they have in common is that each one is shaped for a single vehicle and generation, so the starting point is always your exact model and build date.

Bonnet Scoops

The scoops are matte black and injection moulded from UV stabilised ABS, with dimensions taken from laser scans so the base follows the bonnet's contours without gaps. They attach with genuine 3M double sided tape from the included kit, and an adhesion primer is recommended for the strongest bond. A scoop is a styling piece. It sits on top of the bonnet with no cutting, so the engine breathes exactly as it did before.

Scoops are listed for:

  • Ford Ranger PX2, PX3 and Raptor
  • Mitsubishi Triton MR, and the MV from 2024
  • Isuzu D-MAX from 08/2020 to 04/2024, and the facelift from 2024
  • Nissan Navara from 01/2021 to 03/2026
  • Mitsubishi Pajero Sport QF from 2020
  • Toyota HiLux from 2015 to 12/2025, as a small scoop for owners who want a subtler look

Since the scoop sits on the bonnet surface, any change to that panel means a new part. The D-MAX shows it best, with the 2024 facelift bringing a reshaped bonnet and a separate scoop. Compare both in the D-MAX styling range, or find the small scoop under HiLux body styling.

Lower Door Cladding

Door cladding is a matte black ABS panel set that covers the bottom of each door, the strip that collects gravel rash from the front tyres and dings from neighbouring car doors. The Triton kit, for example, is a four piece dual cab set in UV stabilised ABS, fitted with genuine 3M tape and no drilling. Cladding is listed for:

  • Ford Ranger PX series from 2011 to 07/2022, Raptor included
  • Ford Ranger and Raptor Next Gen from 08/2022
  • Mitsubishi Triton MQ and MR from 2015 to 2024
  • Nissan Navara D23 NP300 from 2015 to 03/2026

Cladding hides light marks within the area it covers, but tape needs a sound surface, so repair flaking or lifting paint first. The Triton set is dual cab only, so confirm your cab style for any kit before ordering. It sits in our Triton styling collection with the MR and MV scoops.

Tail Light Covers for the Next Gen Ranger

The black tail light covers suit the RA Next Gen Ranger in XLT, Sport, Wildtrak and Raptor trim from 2022. They darken the rear corners of the ute and suit owners who have already gone black on wheels, badges or cladding. Whatever sits on or around a lamp, the lights must stay clearly visible to traffic behind, so check with us if you have any doubt about a combination. Ranger owners can find the covers, the cladding and the PX2 and PX3 scoop together in Ranger body styling.

EGR Protection Packs

EGR is an Australian maker of acrylic and ABS vehicle accessories, and the name has no connection with the exhaust gas recirculation system on a diesel engine. A Protection Pack bundles three EGR products for one vehicle. The Tucson pack, for instance, includes a matte black bonnet protector, a pair of clear headlight protectors with anti scratch technology and four slimline weather shields in light smoke, all with no drill fitting. Contents can vary by vehicle, so check the listing for yours.

Packs are listed for:

  • Toyota RAV4 from 01/2019, Kluger from 03/2021 and Prado from 11/2017
  • Nissan X-Trail from 02/2017
  • Mazda CX-5 from 02/2017
  • Hyundai Tucson from 01/2021 and Kia Sportage from 09/2021
  • Volkswagen Amarok from 2011 to 2023, the first generation ute

Buying the pack in one go means the bonnet, headlight and window pieces arrive as a matched set, which is simpler than sourcing them one at a time.

Planning a Coordinated Look

Matte black works with nearly any paint colour, though it stands out most on white, silver and lighter shades. A few combinations from this range:

  • Next Gen Ranger: door cladding with the tail light covers for a dark line from the doors to the tailgate
  • MR Triton: the MR scoop with the MQ and MR cladding
  • Facelifted D-MAX: the 2024 scoop on its own for a cleaner front end

Fitting and Removing Taped Parts

Preparation decides how long a taped part stays put. Wash the area, degrease it, use the adhesion primer and fit on a mild, dry day, then leave the part alone for a day or so before washing. Removal later is possible: gently warm the part, slice through the tape with fishing line or a plastic tool and lift the residue with an automotive adhesive remover. Sound factory paint normally comes through fine, though resprayed or damaged areas can lift. Every category in this range sits under protection and accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Does a bonnet scoop feed more air to the engine?

No. The scoops tape onto the bonnet with no cutting, so they change the look only and engine airflow stays exactly as the factory set it.

Is an EGR Protection Pack anything to do with my EGR valve?

No. EGR is the Australian company that makes the acrylic and ABS parts. Nothing in the pack touches the engine.

What comes in an EGR Protection Pack?

Typically a bonnet protector, two clear headlight protectors and a set of slimline weather shields. Check the listing for your vehicle, as contents can vary.

Will door cladding fit my extra cab or single cab?

The Triton kit is made for dual cabs only, and cab style matters for every kit. Give us your build details and we will confirm before you order.

Can I take styling parts off later?

Yes. Warm the part, cut through the tape and clean off the residue. Factory paint in good condition normally survives, but resprayed panels can lift.

Do you have a scoop for the new generation HiLux?

Not in this collection. The small HiLux scoop is listed for builds from 2015 to 12/2025, so call us before ordering for a newer HiLux.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.