Collection: Tool Boxes

Aluminium and steel ute tool boxes for trays and tubs, from compact square boxes to full length tray boxes with shelves or drawers, a half tool box half dog box, and angled under tray boxes. Lockable, weather resistant storage for tools and gear.

Showing products for your

Showing 9 of 9 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Lockable Storage for Trays and Tubs

A tool box gives tools and gear a permanent, lockable home on the back of the ute. It keeps the tray tidy, stops equipment sliding around and protects it from weather and theft. On tray back utes in particular, tool boxes are the backbone of most work setups.

Box Types

Square aluminium tool boxes. Compact boxes at 420 x 420 x 200 mm and 520 x 420 x 200 mm suit small items such as straps, fuel cans, a first aid kit or hand tools. They tuck into a corner of the tray or mount on a headboard.

Full length tray boxes. Long aluminium boxes run across the tray behind the cab. Our range includes a full opening box at 1750 x 530 x 820 mm with a removable, adjustable shelf, and three quarter opening boxes at 1400 x 500 x 700 mm with a shelf and at 1450 x 530 x 820 mm with two bottom drawers.

Half tool box, half dog box. At 1770 x 690 x 860 mm, this aluminium box splits into a lockable tool section and a ventilated dog compartment, a popular setup for farmers and tradies who take their dog to work.

Under tray boxes. Black steel angled boxes at 650 x 420 x 220 mm mount under the tray, using space that would otherwise be wasted. They come in left hand, right hand or as a pair.

Full Opening or Three Quarter Opening

A full opening box has a lid or door that opens across the whole front, so long tools such as levels and crowbars slide straight in and out. A three quarter opening box leaves part of the front fixed, which adds strength and gives a solid section to mount shelving behind. Choose full opening if you carry long items, and three quarter if you want extra rigidity or a mix of shelving and drawers.

Shelves and Drawers

Built in shelves and drawers make the most of a box's height. The adjustable shelf in the full opening box can be moved to suit tall items below and small ones above, and the bottom drawers in the 1450 mm box keep heavy items low and easy to reach. For more drawer options, see drawer systems.

Measuring Up

Before buying, measure the space you have:

  • Tray width between the side rails or drop sides
  • Depth available from the headboard back, allowing room for the load behind
  • Height to the top of the headboard if you want the box to sit below it
  • Under tray clearance between the chassis, wheels and exhaust for under tray boxes

Allow for the box lid or doors to open fully once it is mounted.

Weight and Payload

A full length box loaded with tools can add a few hundred kilograms to the back of the ute, and every kilogram counts against your payload and GVM. Keep the heaviest items low and as far forward as possible, close to the cab, where they have the least effect on handling. If the ute also tows, include the box and its contents when you work out how close you are to your GCM.

Organising the Inside

Put the tools you reach for every day closest to the opening and the occasional gear at the back. Plastic tubs or tool bags inside the box stop small items rattling around and make it easy to unload when you need the space. Label shelves or bins so anyone using the ute can find and return tools quickly, which matters on shared fleet vehicles.

Travelling With a Dog

If you use the dog box section, plan for the dog's comfort and safety. Make sure there is airflow, shade and water on hot days, and stop regularly on long drives. Animal welfare laws in NSW and the other states apply to dogs carried on utes, and a closed box in the sun heats up quickly.

Mounting and Security

Bolt tool boxes through the tray with large washers or spreader plates so the mounts do not pull through under vibration. Use the locks every time the ute is left, and add extra security for valuable tools if the vehicle is parked on job sites overnight. Check mounting bolts after the first few weeks and after rough roads. Position boxes so lids and doors clear the headboard and tray sides when fully open, with room to reach in comfortably from the side of the tray.

Fitting

Our team can fit tool boxes at the South Windsor showroom, and we deliver across NSW and the rest of Australia. For more ways to organise the back of the ute, see storage and tub accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What size tool box do I need?

Measure your tray width, the depth you can spare behind the headboard and the height available, then allow room for the lid or doors to open.

What is the difference between full opening and three quarter opening?

A full opening box opens across the whole front for long tools. A three quarter opening box keeps part of the front fixed for extra strength and mounting space.

Do you have a tool box with a dog compartment?

Yes. The half tool box, half dog box at 1770 x 690 x 860 mm combines a lockable tool section with a dog compartment.

What are under tray tool boxes?

They mount under the tray to use space that would otherwise go to waste. Ours are black steel, angled, and sold left, right or as a pair.

Aluminium or steel tool box?

Aluminium is lighter and won't rust. Steel is tough and suits under tray mounting, where boxes take knocks from stones.

Can you fit a tool box to my tray?

Yes. Our team fits tool boxes at our South Windsor showroom in Sydney.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.