Ford Ranger Accessories

Everything we fit to the Ford Ranger in one place: canopies, roller shutters, hard lids, bull bars, towbars, roof platforms and tub gear for the PX, PX2, PX3 and RA Next Gen, Raptor included, with advice on which parts to choose first.

Showing products for your

Showing 24 of 255 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Who Brings a Ranger Through Our Door

The Ranger is one of the most common utes on Australian roads, and the spread of owners we fit out reflects that. Electricians and plumbers usually want lockable storage and a towbar before the first job. Fleet managers ask for simple, hard wearing gear that copes with a rotating roster of drivers. Couples heading north for winter want a bull bar, a roof platform and a canopy they can cook out of, while plenty of dual cab families just want the tub kept dry and the bikes on top. Towing runs through most of these builds. Most Rangers carry a 3,500 kg braked rating, but the Raptor is rated at 2,500 kg, so a Raptor owner eyeing a big caravan should know that before spending on hitch gear.

Start With the Right Generation Hub

Our Ranger listings are written per generation, and very little crosses from one to the next because the panels, tub and mounting points changed. Pick your hub first, then shop by category.

The PX series accessories suit the Ranger sold from late 2011 until July 2022. That covers the original PX, the 2015 PX2 facelift and the PX3, which arrived as the MY19 model in 2018 with a 2.0 litre twin turbo diesel and 10 speed automatic. PX Raptor parts in our range are listed from 2018.

The RA Next Gen accessories suit the current Ranger and Raptor from 08/2022, with separate Raptor and Tremor fitments where a part needs them.

Still driving the older PJ or PK Ranger built 2006 to 2011? A heavy duty steel canopy is listed for those utes, and we can check other parts by phone.

Plan the Build From the Tub Outward

A cab chassis Ranger wearing a tray skips the tub categories entirely, so its build comes down to the tray back towbar, front protection and roof gear on the cab. For a tub bodied ute, work through it in this order.

The Tub Cover or Canopy Sets the Rules

On a pickup, settle the rear first, because a canopy, roller shutter, hard lid or soft tonneau each changes what can sit behind the cab and on top. Most Ranger ute canopies come in dual cab and super cab shapes with lift up panels or sliding side windows and central locking, and EGR, aluminium and steel builds all have PX and RA versions.

Prefer to keep the tub open? The Ranger roller shutter range is listed by what sits behind your cab: no bar, Ford's XLT sports bar, the factory extended bar or an aftermarket Armour bar. Each cover is shaped around one of those, so check yours before ordering. A one or three piece hard lid gives a flat, painted look, and EGR offers colour coded versions for the RA. One more knock on effect: HSP's load bars are made to ride on the Roll R Cover Series 3.5, so they only suit owners who pick that cover.

Then the Floor and Tailgate

With the lid chosen, look down. HSP's load slide comes in a version for Ford's genuine tub liner and another for a bare tub, a spray on liner or a five piece liner, in both PX and Next Gen sizes, so settle the lining before buying a slide for the tub. Tailgate central locking, tailgate assist kits and EGR dust defence kits round out the tub and storage gear, each made for one generation.

Front Protection Comes as a Package

Bull bar choice shapes the whole front. Our Ranger bull bars include ADR approved bars from Hamer and Ozbar, PIAK loop and non loop bars, Rockarmor GT bars and RIVAL's aluminium front bar, with separate Raptor versions in both generations. The red single piece bash plates, one for the Next Gen Ranger and one for the Raptor, can only be bought with the matching bull bar, so order them together. Drivers who mostly stay in town can choose a sensor compatible nudge bar instead, and side steps, fender flares and weather shields sit in the wider protection range for the Ranger.

Towing and Roof Gear Last

Towbars depend on the body. Both generations have separate bars for a tub body with step and for a tray back, and the PX adds an extended tray version plus TAG's Extreme Recovery towbar for tray backs. The Ranger towing gear also holds plug and play wiring, including a PX harness with an ECU module. Up top, backbone style platform kits and Prorack Aero Deck platforms suit both generations, and Prorack cross bars are listed for the PX. Leave the roof racks and platforms until the rest is planned, since roof weight draws on the same payload as the tub.

Three Typical Ranger Builds

The trade dual cab usually gets a canopy with lift up panels and central locking for side access to tools, a tub slide underneath, tailgate central locking, the towbar made for the factory step and a matte black nudge bar that will not get in the way in tight car parks.

The touring couple's Ranger leans toward a heavy duty aluminium canopy to save weight, a PIAK bar that comes with its own bash plate or one of Hamer's ADR approved bars, an EGR dust defence kit, a roof platform and a towbar with plug and play wiring for the camper. Swags, recovery gear and the rest of the kit are in camping and recovery.

The family weekender often needs less: an electric roller shutter matched to the factory sports bar, a tub liner, side steps for small passengers and weather shields so the windows can stay cracked in the rain.

Keep a Running Tally of Weight

Every part you add comes off payload. A steel canopy, a steel bull bar, drawers, water and the tow ball download from a van can use up a large share of it before you pack a single bag. Where weight is tight, an aluminium canopy and RIVAL's aluminium front bar are the lighter choices, and we can talk through the numbers before you commit.

Fitted or Sent Anywhere

Oz Canopies & 4x4 has been fitting ute gear since 1998. Expert fitting in NSW is available at our South Windsor showroom, where a big Ranger build can be staged over one or two visits, or order online for delivery Australia wide.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What should I fit first on a new Ranger?

Decide on the tub cover or canopy first. The sports bar, load bars, roof platform and even the tub slide version depend on it. Front protection and the towbar can follow in either order, but buy a Next Gen bash plate with its bull bar.

Will my PX accessories move across to an RA Next Gen?

Very little will. Canopies, covers, bull bars, towbars and tub slides are all made per generation. The EVC iDrive throttle controller lists both PX and RA, and one plug and play trailer harness covers Rangers from 06/2015 to 12/2024, so check those before selling them with the old ute.

My Ranger has a factory sports bar. Does that change which cover I buy?

Yes. HSP Roll R Covers are listed for no sports bar, the XLT bar, Ford's extended bar and the Armour bar, and EGR soft tonneau covers come in sports bar and cabin guard versions. Send us a photo of the bar if you are unsure.

Are Raptor parts different from the standard Ranger?

At the front, yes. Bull bars, nudge bars and some hard lids are made for the Raptor in both generations, and there is a Raptor bash plate too. Many canopies, roller shutters and tub slides list the Raptor alongside the dual cab Ranger, so rear gear is often shared.

I drive a super cab. Which categories have options?

Canopies for the PX Super Cab and RA Extra Cab, HSP roller shutters for the PX Space Cab, EGR soft tonneau covers for the extra cab and HSP tail locks for dual and space cabs. Our side steps, sports bars and tub slides are listed for dual cabs only.

What towbar suits a tray back Ranger?

Both generations have a tray back towbar, the RA version listed for cab chassis utes, and the PX also has an extended tray bar and TAG's Extreme Recovery bar. Tub bodied Rangers take the version made for the factory step.

Can I still tow 3,500 kg once the Ranger is fully kitted out?

The towbar rating stays the same, but payload has to absorb the tow ball download as well as the canopy, bull bar and gear. On a heavy build that runs out before the towing limit does, so weigh the loaded ute before a big trip. The Raptor tops out at 2,500 kg either way.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.