Collection: Roof Platforms

Flat roof platforms for utes, 4WD wagons, vans and canopies. Choose tray kits with backbone style mounts, Prorack Aero Deck heavy duty kits, sized platforms for the LandCruiser, Patrol, Prado and HiAce, or decks made to sit on steel and alloy canopy backbones.

Showing products for your

Showing 24 of 68 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Why Choose a Flat Deck

A platform turns the roof into one continuous load surface. Instead of two or three bars with gaps between them, you get a deck with slots and channels across its whole area, so a rooftop tent, an awning, recovery boards, a shovel and a jerry can holder can all share the space and sit exactly where you want them. Straps can anchor at almost any point, and the flat profile keeps the load close to the roof line. If all you carry is one long item, such as a ladder or kayak, a pair of roof cross bars is simpler and lighter.

Platforms Made for Ute Cab Roofs

Tray Kits With Backbone Style Mounts

A backbone is a frame that runs front to back along the roof and fixes to the vehicle's roof mounting points, and the platform tray sits on top of it. Because each kit is made around one roof, every listing is tied to a model and build period. The D-MAX has kits before and after 08/2020. The Triton has separate kits for the ML and MN, the MQ and MR, and the new MV. The HiLux is split into 2005 to 2015, 2015 onward, and the N90 from 2026. The Ranger and Raptor in PX and RA Next Gen form, both Amarok generations, the Navara D23 and the new D27, the BT-50, Colorado, Cannon, Cannon Alpha, T60, Kia Tasman and BYD Shark 6 all have their own kits.

Prorack Aero Deck Heavy Duty Kits

The Aero Deck is Prorack's aluminium platform, finished in black powder coat. Its slats run across the vehicle and can be repositioned, T slot channels in the slats accept accessories, and a built in wind deflector helps with noise and drag. Kits are listed for the HiLux, Ranger, D-MAX, BT-50, Triton, Navara, Amarok, Colorado, Cannon, Cannon Alpha and T60, with a dedicated kit for the T60 Mega Tub and separate short and long wheelbase kits for the KGM Musso.

Browse by vehicle for HiLux roof platforms, Ranger platform kits, D-MAX roof trays, Triton platforms, BT-50 roof decks and Navara roof platform kits.

Sized Platforms for Wagons and Vans

Four wheel drive wagons and vans get fixed size aluminium platforms, listed by length and width in centimetres:

  • 220 x 142.5: LandCruiser 300 Series, 80 Series, 100 and 105 Series and 76 Series, plus the Patrol Y62
  • 220 x 125: LandCruiser 200 Series, Prado 120 and 150, Patrol GU and GQ, MU-X from 2021, Fortuner, FJ Cruiser, Everest from 08/2022, GWM Tank 300 and Tank 500, and the Land Rover Defender from 2020
  • 150 x 142.5: the 79 Series LandCruiser
  • 180 x 125: the Land Rover Discovery 5
  • 280 x 165: the HiAce from 2019

Wagon owners can go straight to LandCruiser platforms or Patrol roof platforms.

Platforms for Canopy Roofs

Putting the platform on a canopy moves the load off the cab and back over the rear axle, which suits heavy touring setups. Canopy options include 160 x 142.5 and 220 x 125 tray kits that sit on steel and alloy canopy backbones, a universal 125 x 135 aluminium platform for canopy backbone mounts, and an extended Tradesman's rack roof platform in versions for steel and aluminium canopies. If your canopy has no backbone, universal roof tracks in rack mounting accessories can add a mounting channel. The canopy roof has its own load limit, and it applies on top of the platform's.

How Much a Platform Can Carry

A platform setup is a chain of ratings, and the weakest link sets the limit: the vehicle roof or canopy roof, the backbone or mounts, and the deck itself. The platform's own weight comes off that limit before any gear goes on. Factory roof limits are listed in the owner's manual and are often lower than people expect.

Prorack's guidance is a handy reference here. Its published ratings are dynamic, meaning they apply while driving on sealed roads. Off road, Prorack reduces the rating by a third for most mount types and by half for clamp mounts. Parked, the static capacity is roughly three times the dynamic figure as a rule of thumb, though Prorack says to confirm that with the vehicle maker. It also advises against fitting a rooftop tent to a clamp mounted system.

To put numbers on it, picture a roof rated to 80 kg while driving. If the backbone and deck weigh 30 kg together, that leaves 50 kg for gear on sealed roads, and noticeably less once you head off the bitumen.

Gear That Mounts to a Platform

  • Rooftop tents, fixed to the slats with the tent's own mounting hardware
  • Awnings on side brackets
  • Recovery boards, jerry can holders and shovel holders
  • Load stops and eye bolts for strapping down bags and boxes

Sketch the layout before anything is bolted down. Decide which side the awning will open on, usually the kerb side, leave the tent room to fold out, and keep recovery boards where you can reach them from the ground. Keep the heaviest items low and near the middle of the deck, and add the weight of every accessory to your total. Once the platform and its load are on, measure the overall height before you drive into a car park or garage.

Care, Noise and Fitting

Aluminium decks do not rust, but brackets and fasteners still take a beating, so rinse off salt and dust after beach and outback trips and check every bolt after rough roads. Some wind noise is normal, and taking off unused accessories and tying down loose strap ends keeps it in check. NSW customers can have platforms, backbones and accessories fitted at our South Windsor showroom, and the wider range of bars, tracks and racks sits under roof racks and platforms.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What size roof platform suits my vehicle?

Ute kits are made for a model and build period, so choose by vehicle. Wagon platforms are listed by size, such as 220 x 125 cm for a Prado 150 or 220 x 142.5 cm for a LandCruiser 300 Series.

What is a backbone style mount?

A frame that runs along the roof and fixes to the vehicle's roof mounting points. The platform tray sits on it, giving the deck a solid base made for that roof.

Can I put a rooftop tent on a roof platform?

Yes, if the dynamic rating of every part covers the tent while driving and the static rating covers the tent and its occupants when parked. Prorack advises against tents on clamp mounted systems.

Does off road driving reduce how much a platform can carry?

Yes. Prorack cuts its ratings by a third off road for most mount types, and by half for clamp mounts.

Can I fit a platform to my ute canopy?

Yes. We stock tray kits for steel and alloy canopy backbones, a universal platform for canopy backbone mounts, and extended Tradesman's rack platforms. Check the canopy's roof rating first.

Is a platform better than a pair of bars?

For mixed touring gear, yes, because accessories can mount anywhere on the deck. For one long load, like a ladder, bars are lighter and simpler.

Do you have roof platforms for vans?

Yes. There is a 280 x 165 cm aluminium platform for the HiAce from 2019.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.