Collection: Tailgate Assist Kits

HSP Tail Assist gas strut kits that let your tailgate settle open instead of crashing down, with twin strut versions that also lighten the lift. Matched by generation for the Ranger, HiLux, Triton, Navara, D-MAX, BT-50, Amarok, T60, Colorado and X-Class.

Showing products for your

Showing 17 of 17 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

What Happens Without One

On most utes, opening the tailgate means releasing the latch and letting gravity do the rest. The gate swings down until its support cables snap tight, and that jolt lands on the cables, the hinges and anything balanced on the gate. Repeat it a few dozen times a day on a job site and the wear adds up. Lifting it shut is the other half of the chore, especially with a liner panel on the inside face or an armful of tools. And with children or a dog close by, a gate that lowers itself slowly is simply the safer option.

Dampening Only or Weight Reduction Too

HSP Tail Assist kits come in two working types, and the product names tell you which is which.

  • Single strut, dampening only: one gas damper controls the descent so the gate lowers slowly. It does not change the effort needed to close it.
  • Two or twin strut, weight reduction and dampener: one strut slows the fall while a second carries part of the tailgate's weight as you lift.

HSP uses "two strut", "twin strut" and "weight reduction and dampening" across different listings. Any kit that mentions weight reduction includes the lifting strut.

Why Some Utes Only Get a Damper

Some tailgates already have help on the way up. Certain models carry a factory torsion bar along the hinge line, which counterbalances the gate so it feels light to close. Extra lift there is unnecessary, so HSP supplies a single damper for those tubs:

  • Mitsubishi Triton MQ from 2015 to 2018
  • Ford Ranger RA from 2022
  • Volkswagen Amarok NF from 2023
  • Nissan Navara D23 from 2021 to 03/2026

Gates without a torsion bar get the twin strut treatment. That covers the Triton MR and MV, PX Ranger, 2H Amarok, the 2015 to 2020 Navara, the D-MAX from 2021, both BT-50 generations listed, the N80 HiLux SR5, GR and Rugged X, the RG Colorado from 2016, the LDV T60 and the X-Class. Stick with the kit listed for your build rather than adding struts, because each one is specified for a particular tailgate.

Generation and Trim Checks

A few fitments catch people out:

  • Triton: the MQ and MR look much alike from behind but take different kits, so check the build date if your ute was made around the 2018 changeover. All three generations sit in Triton tailgate assist kits.
  • Ranger: PX series utes from 2012 to 2022 take the twin kit, while the RA takes the single damper. See tailgate assists for the Ranger.
  • Amarok: the 2H kit is the two strut design. If your 2H tailgate already feels assisted when you lift it, call us before ordering. Both generations are in Amarok tailgate assist kits.
  • HiLux: the N80 kit suits the SR5, GR and Rugged X, and HSP excludes the Rogue.
  • LDV T60: one kit suits 2018 to 2021 dual cabs and 2019 to 2022 Mega Tubs, and a second suits dual cabs and Mega Tubs wearing the black T60 MAX tailgate cap.

Fitting at Home

HSP designs these kits around factory mounting points, so the tailgate stays on the ute and the job needs no special skills. You need basic hand tools and ideally a helper to steady the gate while the strut ends go on. If you would rather hand it over, NSW customers can have it fitted at our South Windsor showroom.

Liners, Seals and Tailgate Weight

Anything fitted to the tailgate changes how it behaves. The tailgate panel that comes with a tub liner adds a little weight, which a twin strut kit helps offset when you lift. A tailgate dust seal kit means the gate needs a firmer push to latch, because its rubber has to compress, so the struts still lower the gate under control but closing it fully takes a deliberate shove. Roller shutters and hard lids sit on the tub rails and generally stay clear of the struts, so a tail assist can go on before or after a cover.

Living With Gas Struts

Gas struts are sealed units with very little to maintain. Keep the polished rod clean and free of paint, overspray and mud, since grit on the rod wears the seal over time. Struts lose a little force in cold weather and recover as they warm, so the gate can feel slightly different on a frosty morning. Remember the struts change how the tailgate moves, not what it can hold, so the factory limit for weight on the open gate still applies.

Pairing With Other Tailgate Upgrades

HSP lists its Tail Assist as compatible with its Tail Lock kits on utes such as the Triton, T60 and Amarok, so the two make a natural pair. Add tailgate central locking at the same time, or browse the wider storage and tub accessories range for liners, slides and seals.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

How do I know whether I need a single or twin strut kit?

Your vehicle and build year decide it. Each listing names its type, so choose the one written for your ute rather than the one with more struts.

My tailgate is already easy to lift. Is a kit still worth fitting?

Yes. That lightness comes from a factory torsion bar, which does nothing to slow the gate on the way down. A single damper adds the controlled drop.

Is there a kit for the HiLux Rogue?

HSP excludes the Rogue from its N80 HiLux kit. Call us with your build date and we will talk through what suits.

Which T60 kit suits a MAX?

If the tailgate wears the black T60 MAX cap, order the cap version. Utes without it take the kit listed for 2018 to 2021 dual cabs and 2019 to 2022 Mega Tubs.

Do I need to drill the tailgate?

Generally no. HSP kits use the factory mounting points, and the tailgate stays on the ute while they go on.

Can I fit a tail assist and tailgate central locking together?

Yes. HSP lists the two as compatible on many utes, and NSW customers can have both fitted together.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.