Collection: Tub and Ladder Racks

Ladder racks and tub racks for utes and trays. Shop aluminium and adjustable ladder racks for tubs and trays, single ladder racks, sports bar ladder extension bars and the universal dual cab Oz tub rack for carrying ladders and long loads over the cab.

Showing products for your

Showing 8 of 8 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Built for Ladders and Long Loads

Tradies who carry ladders every day know that bars alone are not always enough. A purpose built ladder or tub rack gives long loads a strong, stable frame that runs over the cab and tub, keeps them off the paint and makes loading quicker and safer. This range covers complete racks as well as extension bars that build on what you already have, for tubs and trays alike.

Rack Types

Tub racks. The universal dual cab Oz tub rack mounts in the tub and creates a raised frame over the tub and cab, carrying ladders, pipe and timber high above the tub while leaving the tub itself free.

Ladder racks for tubs and trays. Universal adjustable ladder racks are made in separate versions for tubs and for trays, adjusting to suit different vehicles. A 1530 mm aluminium ladder rack keeps weight down, and ladder racks are also sold as a pair.

Single ladder racks. A single rack adds one more support point, ideal when you already have bars at one end and need the other.

Sports bar extension bars. If your ute has a sports bar, 1450 mm ladder rack extension bars turn it into one end of a ladder rack. They come in matte black steel or chrome stainless steel.

Complete Rack or Extensions

Choose a complete tub rack or ladder rack if you are starting from scratch or carry heavy loads every day, because it gives a single engineered frame designed for the job. Choose extension bars or a single rack if you already have a sports bar or roof bars and just need a second support point. Make sure the two ends sit at the same height so ladders lie flat. If two people regularly load the rack, a full frame is also easier and safer to load from either side.

Front Projection Rules

Ladders often stick out past the front of the cab, and there are limits. Transport for NSW guidance allows a load to extend no more than 1.2 m in front of the vehicle's headlights. Racks should be made for the vehicle, must not obscure the front number plate and should not overload the front axle once loaded. Loads that hang well past the rear may need a flag by day and a light at night, so check the rules in your state.

Securing Ladders

  • Strap ladders at every support point, not just one
  • Add a front and rear tie down for long ladders, so they cannot slide forward under braking
  • Use padding where metal ladders touch metal racks to stop rattles and wear
  • Lock ladders to the rack with a ladder lock or cable if the ute is left on a job site
  • Check straps after the first few kilometres, as loads settle

The National Transport Commission's Load Restraint Guide sets out the principles for securing loads on light vehicles.

Aluminium or Steel

Aluminium racks are lighter, which helps payload and keeps weight off the roof line, and they won't rust. Steel is tougher against heavy daily loading and knocks. Chrome stainless steel extension bars add corrosion resistance with a bright finish, while matte black steel suits darker utes and black accessories. Whichever you choose, look for smooth, rounded sections free of sharp edges, which protect ladders and match Transport for NSW recommendations for rack design.

Racks by Trade

  • Electricians and data techs: extension ladders and conduit, best carried on a full tub rack or ladder rack with front and rear supports
  • Plumbers: ladders plus lengths of pipe, which suit a rack with wide support points and a lockable tube or tie downs
  • Builders and carpenters: timber and long materials, where a strong tub rack spreads heavy loads
  • Painters and maintenance trades: step ladders and planks, often handled well by a sports bar with extension bars

Clearance and Care

A loaded rack makes the ute much taller, so check clearance before entering car parks, drive throughs and covered loading bays. Check the rack's bolts regularly, because daily loading and unloading loosens hardware over time, and look over steel parts for chips that could let rust start.

Working With Other Gear

A tub rack works well with a tonneau cover or roller shutter underneath, keeping gear in the tub covered while long items ride above. If you are adding lights, a rack is a good high mounting point. For other ways to carry gear up high, see roof cross bars and sports bars.

Fitting

Our team fits ladder and tub racks at the South Windsor showroom, and we deliver across NSW and the rest of Australia. See the wider range in roof racks and platforms.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What is the difference between a tub rack and a ladder rack?

A tub rack mounts in the tub and creates a frame over the tub and cab. Ladder racks and extension bars provide support points for ladders on a tub, tray or sports bar.

Can I use my sports bar as a ladder rack?

Yes. Sports bar ladder rack extension bars turn the sports bar into one end of a ladder rack.

How far can a ladder stick out in front of my ute?

Transport for NSW guidance allows a load to extend no more than 1.2 m in front of the headlights.

Do you have ladder racks for trays?

Yes. The universal adjustable ladder rack comes in separate versions for tubs and trays.

Aluminium or steel ladder rack?

Aluminium is lighter and won't rust. Steel is tougher for heavy daily use.

How should I secure ladders on a rack?

Strap them at every support point, add front and rear tie downs, and use padding where metal touches metal.

Can you fit a ladder rack for me?

Yes. Our team fits ladder and tub racks at our South Windsor showroom in Sydney.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.