Collection: Bull Bars

Bull bars for Australian utes and 4WDs from PIAK, ROCKARMOR, Hamer, EGR and Ozbar, plus aluminium front bars from RIVAL. Choose loop or non loop designs, many listed as ADR approved and sensor compatible, each one built for a specific model and build date.

Showing products for your

Showing 24 of 82 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Why Drivers Fit a Bull Bar

A bull bar is a steel or aluminium frame that mounts to the chassis across the front of the vehicle. Its first job is keeping you driveable after an animal strike, shielding the radiator, intercooler and headlights so a kangaroo at dusk does not end the trip on the shoulder. Its second job is practical: a strong base for driving lights, a light bar and a UHF aerial, and on many designs a winch and rated recovery points.

The Brands and Series on Our Shelves

PIAK Premium, Elite and Genesis

PIAK names its bars by series, and in our range those series line up with vehicle generations. Premium bars suit the 2012 to 2016 D-Max and MU-X. Elite bars cover the PX Ranger, the PX MKIII Raptor, the 2013 to 2023 D-Max and the GUN156R Fortuner. Genesis bars suit the Ranger from 5/2022 and the Everest from 6/2022. Most come in loop and non loop form, and many let you choose the colour of the recovery points (black or orange) and the bash plate (black, orange or grey).

ROCKARMOR GT

The ROCKARMOR GT follows the HiLux from the Vigo N70 through the N80 Revo, with a separate bar for the widebody GR and Rogue from 2022 (see all HiLux bull bars). It also suits the MQ, MR and MV Triton, the D-MAX from 2017 to 2024, the PX2 and PX3 Ranger and Wildtrak, the RA Ranger, the Next Gen Raptor and the Next Gen Everest.

Hamer King Series, King Series Plus and Atlas

Hamer's ADR approved bars include the King Series for the Next Gen RA Ranger and the 2021 to 2026 Navara, the King Series Plus for the PX2 and PX3, and the Atlas for the Next Gen Ranger, Ranger Raptor, Everest and NF Amarok. A Hamer bar is also listed for the LandCruiser 300.

RIVAL Aluminium Front Bars

RIVAL builds its front bars from aluminium to keep weight off the front axle. Versions suit the Amarok from 2010 to 2022 and from 2023, the LandCruiser 200, the Next Gen Ranger, Raptor and Everest, and the HiLux, where two versions come bundled with a pair of RIVAL LED fog lights.

EGR Crosstrac, Ozbar and Model Matched Bars

EGR's Crosstrac comes in matte black for the 2020 to 07/2024 HiLux and the NF Amarok. The Ozbar suits the PX2 and PX3 Ranger. We also stock sensor compatible, ADR approved bars made for the MR Triton, D-MAX, BT-50, Navara D23, LDV T60, HiLux SR and SR5, UA Everest and earlier Amarok.

Loop, Non Loop or Aluminium

Start with how and where you drive. A loop bar adds a centre hoop over the grille and headlights, giving the most coverage for regular dawn and dusk runs through the bush. A non loop bar leaves that hoop out for a lower, more open front that still guards the corners and lower front, and it suits drivers who mainly want light mounting and strength without the full height look. An aluminium bar saves weight compared with steel, which helps when the ute already carries a canopy, drawers and a touring load close to its GVM. Whichever you pick, a heavier bar can settle the front suspension, so plenty of owners pair it with springs rated for the extra load.

Compliance in NSW: the Frontal Protection Specification

Transport for NSW publishes a technical specification for frontal protection systems fitted to light vehicles, which covers vehicles of 4.5 tonnes GVM or less and draws on Australian Standard AS 4876.1. Key points include:

  • the bar follows the shape of the vehicle's front, with closed, rounded ends and no sharp edges
  • the top of the bar leans forward no more than 75 mm
  • mandatory front lights and indicators stay visible, or the bar carries its own replacements
  • the number plate is readable from 20 metres
  • the bar stays within the width of the mirrors and leaves at least 100 mm of ground clearance
  • where the bar rises above the bonnet line, the driver can still see the road 11 metres ahead
  • the bar is permanently marked with its maker and the vehicle it was made for

That marking must also state that nothing may project forward of the bar, so mount lights and aerials behind its front face. Other states publish their own guidance, so check the rules where the vehicle is registered.

Airbags, ADR 69 and Front Sensors

ADR 69 is the Australian Design Rule for full frontal impact occupant protection, the crash standard your airbags and restraints are engineered around. A bull bar changes how the front structure takes a crash load, so on an airbag equipped vehicle it must not interfere with airbag calibration or deployment timing, and its mounts should sit clear of the airbag sensors. That is why each bar is engineered for one model, and why ADR approval on a listing is worth checking. It is reasonable to ask for written confirmation that the vehicle still meets the ADRs, including ADR 69, with the bar fitted.

Late model utes also carry radar and cameras for autonomous emergency braking and adaptive cruise, plus parking sensors. Bars listed as sensor compatible are shaped to leave those systems working. Match the exact build date too: the Raptor takes different bars to the standard Ranger, the widebody HiLux has its own ROCKARMOR, and several listings split by build month, such as the D-MAX and the Everest.

What to Plan With the Bar

  • Underbody plates: some bash plates are made to bolt to a matching bar and must be ordered with it. See underbody protection.
  • Winch: confirm the bar has a winch mount before buying a winch, and plan the wiring and battery supply. Browse winches and recovery gear.
  • Lights and aerial: sort mounting positions and switch wiring at the same time.
  • A lighter alternative: if you mainly want lights and a cleaner front, a nudge bar may be enough.

Fitting at South Windsor

A bull bar involves airbag sensors, driver assistance hardware and chassis mounts, so it deserves an experienced fitter. Oz Canopies has been fitting ute accessories in Sydney since 1998, and we deliver across NSW and the rest of Australia. For side and rear gear, see protection and accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Is it legal to fit a bull bar in NSW?

Yes, as long as it meets the Transport for NSW specification for frontal protection on light vehicles. In practice that means a bar made for your model and fitted to the maker's instructions, with lights and number plate visible, rounded ends and at least 100 mm of ground clearance.

What does sensor compatible mean on a bull bar?

The bar is designed around your model's front radar, cameras and parking sensors so they keep working once it is fitted. Sensor positions change between generations and facelifts, so match the build date on the listing to your vehicle.

What is the difference between a loop and a non loop bull bar?

A loop bar has a centre hoop across the grille and headlights for maximum coverage. A non loop bar leaves that hoop out for a lower, cleaner look and a little less weight, while still protecting the wings and lower front.

Why would I pick a RIVAL aluminium bar over a steel one?

Mainly weight. Aluminium puts less load on the front axle and springs, which helps a ute that is already heavily loaded. Steel remains the usual choice for drivers who expect regular knocks in the bush.

Can I move my bull bar across to my next ute?

Usually not. Under the NSW specification a bar is marked for a specific make, model and build years and must not be fitted to other vehicles. A new generation normally changes the mounts, sensors and crash structure anyway.

Will a bull bar affect my airbags?

It can if it is not made for the vehicle. A bar on an airbag equipped vehicle must not interfere with airbag calibration or deployment timing, and frontal crash compliance under ADR 69 has to be maintained. Choose an ADR approved bar listed for your exact model and have it professionally fitted.

Do I need new front springs after fitting a bull bar?

Often it is worth doing. A steel bar, winch and lights add real weight over the front axle, which can drop ride height and dull the steering feel. Springs rated for the added load restore the height, and you should confirm the total stays within your front axle and GVM limits.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.