Collection: EGR Canopies

EGR canopies for dual cab utes, engineered and built in Australia and painted to your ute's factory colour. Choose the EGR Gen 3 canopy with flush frameless windows, touch pad releases and central locking integration, or the EGR Premium canopy with lift and slide window combinations. Clamp on fitting with no drilling, for the Ranger, HiLux, Triton, D-MAX, BT-50, Navara and Amarok.

Showing products for your

Showing 13 of 13 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

EGR Canopies, Designed and Built in Australia

EGR is a Brisbane based manufacturer known for canopies that look like they left the factory with the ute. Each canopy is moulded from UV stable ABS, trimmed by robot for consistent edges and painted in the vehicle's original colour, so the canopy and cab read as one shape. They clamp onto the tub without drilling and connect through a vehicle specific plug and play wiring harness.

We carry two EGR canopy lines, the current Gen 3 and the earlier Premium. Which one you need mostly comes down to your ute's generation.

EGR Gen 3 Canopy

The Gen 3 is EGR's current canopy and the one made for most late model utes.

  • Windows: frameless side lift windows that sit flush with the body, opened by hidden pressure sensitive touch pads and held up by gas struts
  • Locking: side windows and rear door run off the ute's own central locking, with a soft touch button to release the rear door
  • Inside: integrated LED lighting and a carpet lined interior
  • Roof: built in, weather sealed roof rack tracks that work with major aftermarket rack systems. EGR rates the Gen 3 for the Triton MV at 80 kg dynamic and 200 kg static
  • Warranty: three year manufacturer warranty (glass not covered)

EGR Premium Canopy

The Premium is EGR's earlier design and still the right fit for many previous generation utes.

  • Windows: frameless tinted safety glass in three side combinations: lift on both sides, slide on both sides, or one of each
  • Locking: a central rear handle with slam latches and keyed alike locks
  • Inside: interior LED light
  • Roof: EGR sets a roof load figure for each model, so check the rating for your ute before fitting a rack

Gen 3 or Premium

On a current model ute, the Gen 3 is usually the only EGR option, and it brings the cleaner flush window design and central locking integration. The Premium suits earlier generations and offers sliding windows, which some owners prefer for ventilation or for a dog riding in the back. Where both are available for the same ute, such as the PX Ranger, choose Gen 3 for the flush look and touch pad releases, or Premium if you want sliding glass.

Utes We Carry EGR Canopies For

  • Ford Ranger: RA Next Gen and Raptor (Gen 3), plus PX, PX2 and PX3 including Raptor (Gen 3 or Premium)
  • Toyota HiLux: SR5 dual cab from 2015 with the A deck tub (Gen 3)
  • Mitsubishi Triton: MV from 2024 (Gen 3), MQ and MR from 2015 to early 2024 (Premium)
  • Isuzu D-MAX: 2020 on (Gen 3), 2016 to 2019 and 2012 to 2016 (Premium)
  • Mazda BT-50: 2020 on (Gen 3), 2011 to 2020 (Premium)
  • Nissan Navara: D23 facelift from 2021 (Gen 3)
  • VW Amarok: NF Next Gen from MY23 (Gen 3)

All of these are dual cab fits. HiLux owners should confirm whether they have the A deck or J deck tub before ordering, because the EGR HiLux canopy is made for the A deck.

Why ABS

EGR canopies are made from ABS, a tough thermoplastic, rather than fibreglass or metal. Moulding gives the smooth curves that match modern ute body lines, and ABS takes automotive paint well. It weighs less than steel, won't rust and shrugs off the minor knocks a canopy cops in daily use. If you want maximum impact resistance for heavy trade work, a steel canopy is the tougher option.

Colour Matching

EGR paints each canopy in the factory colours offered for that model, ordered by paint code. The Gen 3 for the Triton MV, for example, is offered in eight Mitsubishi colours. Have your paint code ready when you order, usually found on the vehicle's build plate.

Looking After an EGR Canopy

Wash the canopy with the same car wash products you use on the ute, and keep high pressure jets off the window seals. After the first few hundred kilometres, and again after any rough off road trip, check that the clamps are still tight, because the canopy can settle on the tub rails as it beds in. If a lift window starts to drop or a gas strut feels weak, it is usually a simple part swap rather than a big repair.

EGR Parts and Upkeep

Upgrade and replacement parts, including EGR Premium rear window central locking, Gen 3 lift window stays and the Gen 3 internal support frame, are in canopy parts and accessories. For every other way to cover the tub, see the full ute canopy range.

Fitting

Because EGR canopies clamp on, nothing gets drilled into your tub, and the harness plugs into the ute's existing wiring for lights and locking. Our team fits EGR canopies at the South Windsor showroom, and we deliver across NSW and the rest of Australia.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Are EGR canopies fibreglass?

No. EGR canopies are moulded from UV stable ABS, then robotically trimmed and painted in your ute's factory colour.

What is the difference between the EGR Gen 3 and Premium canopy?

The Gen 3 is the current model, with flush frameless lift windows, hidden touch pad releases, built in roof tracks and central locking integration. The Premium is the earlier design, with lift or slide window combinations and a central rear handle.

Do EGR canopies need drilling?

No. They clamp onto the tub and connect with a vehicle specific plug and play wiring harness.

Will an EGR canopy work with my ute's central locking?

The Gen 3 links its side windows and rear door to the ute's central locking. The Premium uses a central handle with slam latches and keyed alike locks, and a central locking kit for the rear window is available.

Can I put a roof rack on an EGR canopy?

Yes. The Gen 3 has built in roof rack tracks that suit major aftermarket systems. Roof ratings vary by model, so check the rating for your canopy before loading it.

Which HiLux does the EGR canopy fit?

The SR5 dual cab from 2015 with the A deck tub. Check your tub type before ordering.

Do you stock EGR canopies for single or extra cab utes?

Our EGR range is for dual cab utes. For other cab styles, see our aluminium and steel canopies.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.