Collection: Mazda BT-50 Towbars and Towing

Towbars, recovery bars and Plug N Play looms for the BT-50, split between the 2011 to 2020 ute that shared its base with Ford's PX Ranger and the current model built on Isuzu's D-MAX. Choose by build date, then body.

Showing products for your

Showing 13 of 13 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Two Partners, Two Sets of Towing Gear

Mazda's BT-50 changed partners in 2020, and its towing hardware changed with it. The ute sold from 2011 to 2020 shared its T6 base with the PX Ranger, so a few towing parts are listed for both. The current BT-50 uses the D-MAX's structure and body shell, and from 2020 its bars and loom carry Isuzu fitment instead. Read the build month on the compliance plate first, because listings change between 07/2020 and 10/2020 depending on the part.

Both generations are rated to tow 3,500 kg, so the choice is never about capacity. It comes down to the year, the body and the kind of towing you do.

Bars for the 2011 to 2020 BT-50

Tub bodied utes take a bar made for the factory rear step, with listings for 2011 to 08/2020 and 09/2011 to 10/2020. Tray backs have their own bar for 2011 to 08/2020. Off road tray back owners can step up to TAG's Extreme Recovery towbar, which names both the BT-50 and the PX Ranger from 09/2011.

Buying one of these second hand? Check that the bar fitted matches the body the ute wears now, because plenty of them have swapped a tub for a tray during a working life, and a bar made for one body is not listed for the other.

Wider Choice From 2020

The current ute has more brands to pick from. TAG's Heavy Duty bar, TAG+, BTA's bar and our own Oz Canopies & 4x4 towbar all suit a tub or a tray back. Cab chassis owners get specialist TAG bars too: an Extended Heavy Duty bar for extended cab chassis utes without a step, and an Extreme Recovery bar for cab chassis utes without a step. A further TAG Extreme Recovery bar is listed for tray backs from 07/2020.

How to choose? A tradie towing a plant trailer every day on a tub ute usually lands on a heavy duty bar from TAG or BTA. A tourer running a tray into sand country gets more from a recovery bar, which provides rated points for straps and shackles. The tow ball itself must never be used for a snatch recovery, since it is not built for shock loads. Compare them all in BT-50 towbars, or browse the full towbar range.

Looms for Each BT-50

Each generation has a Plug N Play loom with an ECU module. The 2011 to 08/2020 loom is shared with the PX, PX2 and PX3 Ranger, and the 08/2020 to current loom is shared with the D-MAX. The module keeps the trailer's lighting load away from the ute's electronics, and the plug in design means nobody cuts into the factory wiring. Both sit with our harnesses for every vehicle.

The loom looks after lights and indicators. A van heavy enough to use much of the 3,500 kg rating will run electric brakes, and those need a brake controller mounted in the cab, so plan it into the same order rather than discovering it on hitching day.

Older Utes Still Doing the Hard Work

The 3.2 litre five cylinder in the 2011 to 2020 ute makes 147 kW and 470 Nm, and many are still pulling vans and boat trailers on their second or third owner. Before asking one to tow near its limit, look over the rear springs, the existing bar and the wiring plug. A tired bar or a corroded socket is cheaper to replace than to trust. The current 3.0 litre ute makes 140 kW and 450 Nm and carries the same 3,500 kg rating.

What a 6,000 kg GCM Means

The current 4x4 has a 6,000 kg gross combined mass, the most the loaded ute and loaded trailer may weigh together. Hitch a van that weighs the full 3,500 kg and only 2,500 kg is left for the ute itself, including its own weight, fuel, passengers and everything in the tub. Payload runs from 924 kg to 1,379 kg depending on body and grade, and the ball download counts against it. On a dual cab with a canopy, drawers and a fridge, the sums get tight quickly.

If you plan to tow near the limit, keep the tub setup light, let the van carry its own water, and weigh the combination before a long trip. On the older 3.2 litre ute, allow for up to 350 kg on the ball.

Getting the Trailer Level

Ball height matters more than most owners expect. A trailer that sits nose up or nose down brakes poorly, tracks badly and wears its tyres unevenly. Load the BT-50 as you would for the trip, measure the receiver and the trailer coupling, then choose a mount that bridges the gap. Adjustable mounts, weight distribution shanks and hitch covers are in towbar mounts and hitch parts.

Fitted in Sydney or Sent to You

NSW customers can have BT-50 bars and looms fitted at South Windsor, with the mount height set while the ute is on the hoist. Owners elsewhere in NSW and across Australia can have parts freighted. The rest of our towing gear sits under every towing category.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

My BT-50 was built in 09/2020. Which towbar fits?

Confirm which shape you have first. Bars for the current ute start at 07/2020 or 08/2020, while one older tub body bar runs to 10/2020. The compliance plate and a photo of the rear settle it.

Can the towbar from my PX Ranger go on my 2015 BT-50?

Only TAG's Extreme Recovery tray back bar lists both utes. Every other bar is made for one or the other, so check that the listing names your BT-50.

Which loom suits a 2019 BT-50?

The Plug N Play loom with ECU module listed for 2011 to 08/2020, the one shared with the PX Ranger. The current ute's loom starts at 08/2020.

I run an extended cab chassis with a tray. What fits?

TAG's Extended Heavy Duty bar is made for extended cab chassis utes from 07/2020 without a step. Tray backs can also take TAG's Extreme Recovery bar.

Is BT-50 towing gear the same as the D-MAX's?

From 2020, much of it is. The TAG, TAG+, BTA and Oz Canopies & 4x4 bars and the ECU module loom all list both utes. Earlier BT-50 utes share parts with the PX Ranger instead.

Can I still tow 3,500 kg with a canopy fitted?

The rating stays at 3,500 kg, but the 6,000 kg GCM caps the whole combination. With a full rated trailer the loaded ute can weigh no more than 2,500 kg, so heavy tub gear cuts what you can legally pull.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.