Collection: Nudge Bars

Nudge bars for utes and 4WDs in matte black or chrome, with sensor compatible versions and bash plate options. A compact centre bar for driving lights, a light bar and a UHF aerial, made for specific models from the Ranger and HiLux to the Musso and Tasman.

Showing products for your

Showing 24 of 34 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

A Smaller Bar With a Clear Purpose

A nudge bar is a compact frame that sits across the centre of the front bumper. It does not try to protect the whole front end the way a bull bar does. Instead it gives you a solid, tidy place to mount driving lights, an LED light bar and a UHF aerial, and it takes the sting out of minor knocks around the middle of the bumper, the kind that happen in tight car parks, at farm gates or when nosing up to a loading dock. Because it is light, it barely changes front axle load, so it suits utes that already carry a canopy, roller shutter or heavy tub setup.

Finishes and Versions in the Range

Every bar in this collection is made for a named model, and many come in a choice of finish.

  • Matte black: blends with dark grilles, black wheels and blacked out trim packs, and hides road grime between washes.
  • Chrome: suits vehicles with chrome grilles and bright trim, with chrome versions listed for the Ranger, Everest, MR Triton, earlier BT-50 and Pajero Sport.
  • Sensor compatible: shaped to keep factory front radar, cameras and parking sensors working, which matters on late model utes with autonomous emergency braking and adaptive cruise.
  • With bash plate: adds a plate below the bar for extra cover over the lower front of the bumper.

Fitment Across Generations

Front ends change with each generation, so nudge bars are split by model and build date. A few examples from the range:

  • Ford Ranger: separate bars for the PX, PX2 and PX3 up to 07/2022, the RA Next Gen from 2022 and the PX Raptor, plus a dedicated bar for the RA Raptor and Tremor. See Ranger nudge bars.
  • Mitsubishi Triton: the MQ from 2015 to 2019 with bash plate, the MR from 2018 and the MV from 2024. See nudge bars for the Triton.
  • Holden Colorado: Series 1 from 2012 to 2016, Series 2 from 2016 to 2021 and a Z71 version. See Colorado nudge bars.
  • Isuzu D-MAX: 2012 to 08/2020 and 08/2020 to 05/2024, both with bash plate. See D-MAX nudge bars.
  • Toyota HiLux: the Vigo SR and SR5 from 2005 to 2015, and the N80 Revo SR and SR5 split at 2020. See HiLux nudge bars.
  • LDV T60: the original T60 up to 10/2021 and the T60 MAX from 11/2021. See T60 nudge bars.
  • KGM Musso: one bar for short tub and XLV models from 2018. See Musso nudge bars.

We also stock bars for the Everest before and after 2022, the BT-50 up to 07/2020 and from 08/2020, the Navara D23, the 2H Amarok, the GWM Cannon, the Pajero Sport QF and the Kia Tasman.

Small Bar, Same Rules

It is easy to assume a small bar sits outside the regulations, but the Transport for NSW specification for frontal protection on light vehicles treats nudge bars the same way as bull bars. A compliant bar keeps your headlights, indicators and number plate visible, has closed, rounded ends with no sharp edges, does not lean forward past the allowed limit and carries permanent marking showing the vehicle it was made for. That marking states that accessories must not project forward of the bar, so mount a light bar or spotlights behind its front face rather than out in front of it.

Lights, Aerials and Front Sensors

Most buyers fit a nudge bar to carry lighting, so plan the lights before you order. Work out where your vehicle's front radar and cameras sit first. On many late model utes the radar sits behind the grille or lower bumper, and a light bar mounted across its path can trigger fault warnings or switch off driver assistance features. A sensor compatible bar is shaped around the factory hardware, but the lights you add still need to leave those sensors a clear view. Sort the wiring, switch position and aerial cable at the same time so everything goes on together.

Nudge Bar or Bull Bar?

A nudge bar is the right call for city, suburban and highway driving where you want lights and an aerial without the weight and bulk of full frontal protection. It will not shield the radiator, headlights or wings in a serious animal strike, and it is not built to carry a winch. If you regularly drive country roads at dawn and dusk, tour remote areas or need winching capability, step up to a bull bar. Plenty of owners start with a nudge bar on a work ute and move to a full bar only when the vehicle changes jobs.

Keeping the Finish Looking Right

Chrome and matte black need slightly different care. Wash chrome with a mild car wash and dry it off to avoid water spots, and remove bugs and tar promptly so they do not etch the surface. On matte black, skip gloss polishes and waxes, which leave a patchy sheen, and use a soft brush around the light mounts and plate edges where grime builds up. After a run along the coast or a trip through floodwater, rinse behind the bar and around the mounting brackets, and check the bolts are still firm.

Fitting and Delivery

NSW customers can have nudge bars fitted at our South Windsor showroom, including lights and aerials, and we deliver across NSW and the rest of Australia. For the rest of the front, side and rear gear, see protection and accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Do nudge bars have to meet the same rules as bull bars?

In NSW, yes. The Transport for NSW specification covers nudge bars alongside bull bars, so lights and the number plate must stay visible, ends must be rounded and the bar must be marked for the vehicle it suits.

Should I choose matte black or chrome?

Match the trim already on the vehicle. Chrome suits bright grilles and chrome highlights, while matte black suits dark grilles, black wheels and blacked out packs, and it is easier to keep looking clean.

What does a bash plate add to a nudge bar?

A plate below the bar that gives extra cover over the lower front of the bumper. It suits utes that spend time on gravel roads, farm tracks and long grass.

Can I mount a light bar on a sensor compatible nudge bar?

Yes, provided the light bar does not block the front radar or camera. Check where your vehicle's sensors sit and choose a mounting position that leaves them a clear view.

Will a nudge bar protect me from a kangaroo?

Only a little. It may soften a low speed hit to the centre of the bumper, but it will not shield the radiator, headlights or wings. For regular country driving a bull bar is the better choice.

Can I fit a winch to a nudge bar?

No. A nudge bar is not designed for winching loads. If you need a winch, choose a bull bar with a winch mount.

Is there a nudge bar for the Ranger Raptor and Tremor?

Yes. We stock matte black sensor compatible bars for the PX Raptor from 2018 to 07/2022 and for the RA Raptor and Tremor from 2022.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.