Collection: GWM Cannon Roller Shutters

Roller shutters for the GWM Cannon dual cab from 2020, in electric and manual styles. HSP makes covers for the Armour Bar, the genuine extended sports bar, the OE A Frame bar and a bare tub, alongside EGR Rolltrac, Oztrax and our manual shutter.

Showing products for your

Showing 6 of 6 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

One Cannon, Several Bars

Every Cannon shutter here is listed from 2020 to Current, so the generation question is easy. The bar behind the cab is what decides the cover. HSP makes Series 3.5 versions for four set ups:

  • the HSP Armour Bar
  • the genuine extended sports bar
  • the OE A Frame sports bar
  • no sports bar at all

EGR's electric Rolltrac, our Oztrax electric shutter and our manual shutter are each listed in one version for the Cannon from 2020. Second hand Cannons often have a bar added after sale, so check what is fitted rather than the brochure. If your Cannon came with a bar from the dealer, check which style it is before you order, because the HSP covers are made to sit with one bar each. The Cannon Alpha is a larger ute with its own tub, so it has separate covers in Cannon Alpha roller shutters.

The Armour Bar and the Roll R Cover

HSP's Armour Bar for the Cannon is made to work with or without a Roll R Cover, which makes it a sensible bar to fit first if you are building the tub in stages. You can add the shutter later and order the Armour Bar version to match. The bar is in our Cannon sports bars, and fitting the bar and the cover in the same visit saves removing trim twice. HSP covers the shutter itself with a 2 year warranty on the unit, extended to 3 years when it is registered on HSP's website.

Electric Shutters

An electric cover opens and closes from a remote or switch and is wired to the ute's battery as part of the fit. On a Cannon that doubles as a family car, that is often the deciding point, since the tub can be shut every time you walk away. The three electric options are HSP's Series 3.5, EGR's Rolltrac and our Oztrax shutter. HSP gives you the bar specific versions and load bars, while EGR and Oztrax keep it to a single version for the Cannon. Browse them in Cannon electric roller shutters.

The Manual Shutter

Our manual roller shutter for the Cannon from 2020 rolls by hand and locks at the tailgate. There is no motor, wiring or remote to look after, so it suits a working Cannon that is opened all day, or an owner who simply wants the security and clean look of a shutter without the electrics. See it in Cannon manual roller shutters.

Load Bars and Tub Gear

HSP's Cannon load bar mounts on the Roll R Cover and carries ladders, kayaks or timber above the closed shutter. Find it in Cannon tub cross bars. Tie loads to the bars, not to the shutter slats. Below the cover, a Cannon tub slide brings heavy gear to the tailgate, as long as the load clears the canister at the front of the tub. To lock the tailgate with the doors, add a Cannon tailgate central locking kit.

Shutter or Hard Lid

A shutter rolls back to open the full height of the tub, which is what you want when the load changes from day to day. A hard lid gives a flat top and suits a tub that only carries low gear. A hard lid also has to be lifted off for tall loads, while a shutter simply rolls away. Compare both in Cannon hard lids. The shutter's canister takes a little floor length at the front, so measure long items with that in mind.

Before You Order

  • Bar. Armour Bar, genuine extended, OE A Frame or none.
  • Model. Cannon, not Cannon Alpha, which has a larger tub and its own listings.
  • Load bars. Planned now or later? HSP keeps that option open.
  • Liner. Mention any over rail liner, since it can change how the rails sit.
  • Tailgate. A central locking kit means the tailgate locks with the doors.

Day to Day

With the cover rolled part way back, a Cannon tub takes a bike, an esky or a load of green waste without unloading everything else. Rinse sand out of the tracks after the beach, keep the drain outlets clear, and look over the tailgate seal when the ute is serviced.

Fitting and Delivery

Expert fitting in NSW is available at our South Windsor showroom, where we set each cover up with your bar and run the power for electric covers. Every cover here can also be sent Australia wide for your own installer. Afterpay and Zip are available, and we are a family owned business that has been fitting utes since 1998, with 700+ five star Google reviews. For the rest of the Cannon range, see GWM Cannon accessories. Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Which HSP cover suits my Cannon's factory bar?

HSP makes versions for the genuine extended sports bar and the OE A Frame sports bar. Check which style your Cannon has before ordering.

Will a Cannon shutter fit the Cannon Alpha?

No. The Alpha has a larger tub and its own covers.

Can I fit the Armour Bar now and the shutter later?

Yes. HSP's Armour Bar for the Cannon works with or without a Roll R Cover, and there is a Series 3.5 version made to suit it.

Is there a manual roller shutter for the Cannon?

Yes. Our manual shutter is listed for the Cannon from 2020 to Current.

Can I carry a ladder on the shutter?

Use HSP's Cannon load bar on the Roll R Cover rather than loading the cover itself.

What warranty does HSP give?

2 years on the unit, or 3 years once the cover is registered on HSP's website.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.