Collection: Mitsubishi Triton Throttle Controllers

The EVC iDrive throttle controller for MQ, MR and MV Tritons, also listed for the Pajero Sport. It changes how quickly the electronic accelerator pedal calls for power, so response can be sharper or softer to suit the job.

Showing products for your

Showing 1 of 1 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

One Controller Across Three Generations

The MQ and MR run a 2.4 litre single turbo diesel with 133 kW and 430 Nm, while the MV moved to a 2.4 litre twin turbo making 150 kW and 470 Nm. Every one of them uses a drive by wire pedal, and one iDrive is listed for all three plus the QE and QF Pajero Sport. It plugs into the accelerator pedal module with a supplied patch loom. Engine output stays the same; what changes is how the pedal signal is translated.

Where Triton Drivers Feel It

Towing is the common reason, with a quicker pickup when pulling away from a standstill with a camper or boat behind. Off road, a softer setting gives finer pedal control at crawling speed over rocks and ruts. The unit has four driving modes plus an auto function for set and forget use. Compare it with controllers for other utes in our throttle controller range.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Will the iDrive suit my 2012 MN Triton?

No. This unit is listed for MQ, MR and MV Tritons from 2015. ML and MN models use a different EVC unit, so call us with your build year.

Does it work with the MV's six speed automatic?

Yes. The iDrive works with automatic and manual gearboxes, so it suits the auto MV as well as manual MQ and MR utes.

Can I move it to my next Triton?

If the next one is an MQ, MR or MV, yes. It unplugs from the pedal module, the factory connection goes back in, and the controller moves across.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.