Collection: Mazda BT-50 Throttle Controllers

EVC iDrive throttle controllers for the Ranger based UP and UR from 2011 to 08/2020 and for the D-MAX based TF, each plugging in at the accelerator pedal.

Showing products for your

Showing 2 of 2 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

How the iDrive Works

Every BT-50 from 2011 on uses drive by wire, with the pedal sending an electronic signal to the engine computer. The iDrive connects at the pedal with a patch loom and reshapes that signal. Choose Ultimate mode for sharper response, Eco for a softer pedal, an automatic mode, or factory mode, with nine levels each in Ultimate and Eco.

Matching the Unit to Your Engine

The UP and UR were offered with a 3.2 litre five cylinder turbo diesel (147 kW, 470 Nm) and, in some variants, a 2.2 litre four cylinder. The TF runs a 3.0 litre four cylinder from Isuzu (140 kW, 450 Nm), and the XS grade added a 1.9 litre from 2022. Ultimate takes the hesitation out of pulling away with a trailer, while Eco calms the pedal on highway runs or slippery tracks. See also our throttle controllers for other utes.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Why does the older BT-50 controller list the Ford Ranger too?

The BT-50 built from 2011 to 08/2020 was developed alongside the PX Ranger, so the same iDrive unit is listed for both.

Does the 1.9 litre XS use the same unit as the 3.0?

The TF controller is listed for every BT-50 from 08/2020, XS grades included. Give us your VIN if you want it double checked.

Will the iDrive raise my BT-50's power figures?

No. Peak outputs stay at 140 kW on a 3.0 TF or 147 kW on a 3.2 UR. It only changes how quickly the throttle opens, and factory mode restores the standard feel.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.