Collection: Trailer Wiring Harnesses

Plug and play trailer wiring harnesses for utes, 4WDs, SUVs, vans and cars. Vehicle specific looms with ECU modules or relays plug into the factory wiring, plus universal harnesses with a 7 pin flat plug and direct fit harnesses for vehicles with a factory 13 pin socket.

Showing products for your

Showing 24 of 78 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Wiring That Plugs Straight In

A towbar holds the trailer, but it is the wiring harness that makes the trailer's tail lights, brake lights and indicators work. Our plug and play looms connect to existing plugs in the vehicle's rear wiring, so there is no cutting or splicing into factory wires. That keeps the original wiring intact, makes the loom easy to remove later and avoids the faults that spliced connections often cause.

With an ECU Module, With Relays or Direct

How a harness connects depends on how the vehicle runs its lights.

ECU module harnesses suit most late model vehicles. Their lights are controlled by body computers that monitor each circuit, and a trailer plugged straight in can read as a fault, trigger warnings or shut circuits down. The ECU module, also called an isolation module, reads the vehicle's signals and powers the trailer lights from a separate fused feed, so the vehicle never sees the extra load.

Relay harnesses do a similar job on older vehicles with simpler lighting, protecting the vehicle's circuits from the trailer's draw.

Direct harnesses suit some older vehicles that need neither.

The HiLux shows how this changes across generations: the 2005 to 2008 HiLux uses a direct loom, the 2008 to 2015 model uses relays, and the HiLux from late 2015, including the new N90, uses an ECU module. The listing for your vehicle tells you which you need.

Shared Looms Across Related Vehicles

Vehicles that share a platform often share a loom. One harness suits the PX Ranger and the 2011 to 2020 BT-50. Another covers the Ranger from 2015 to 2024 along with the NF Amarok and the earlier Everest. The D-MAX, MU-X and Colorado share one, and so do the Colorado 7 and Trailblazer. Search by your exact model and build date, because the cut off dates matter. The T60, for example, has separate looms before and after early 2024. Getting the build date right is the single most important step when ordering a loom, and it is printed on the vehicle's compliance or build plate.

Not Just Utes

Plug and play looms cover far more than utes. The range includes harnesses for wagons and SUVs such as the Kluger, Pajero, Pajero Sport, Patrol, X-Trail and Outlander, Hyundai and Kia models including the Tucson, Sportage and Sorento, Subaru's Liberty, Forester, Outback and Impreza, and the BMW X5 and X6. Vans and people movers are covered too, including the HiAce, iLoad and Tarago, along with the VF Commodore sedan.

Factory 13 Pin Sockets

Some newer vehicles come from the factory with a 13 pin socket, including the GWM Cannon from late 2024, the Cannon Alpha, Tank 300 and Tank 500. The TAG direct fit harness is made specifically for these vehicles.

Universal Harnesses

If there is no dedicated loom for your vehicle, or you are building something custom, universal harnesses come with a 7 pin flat plug, with or without an ECU module. They take more work to fit, because they connect to the vehicle's lighting circuits rather than plugging into a factory connector, so we recommend an auto electrician or our fitting team.

Plug Types

The 7 pin flat plug is the standard connection for light trailers in Australia, from box trailers to boat trailers and many campers. Caravans and larger campers often use a 12 pin plug, which carries extra circuits such as reversing lights and auxiliary power. If your vehicle and trailer plugs differ, an adaptor can bridge them, but make sure every circuit you need is carried through.

Brakes and Charging Need More

A lighting harness does not power electric trailer brakes or charge a camper battery. Electric brakes need a brake controller, and charging needs a heavy gauge cable, usually with an Anderson plug. Both are in towing electrical accessories.

Test Before Every Trip

Hook up the trailer and have someone check the tail lights, brake lights, both indicators and the number plate light. Look for green or white corrosion on the plug pins, especially on boat trailers that get dunked in salt water, and clean or replace the plug before it causes a failure on the road.

Signs your wiring needs attention:

  • Trailer lights that flicker or only work when the plug is wiggled
  • Indicators that flash faster than normal with the trailer connected
  • Warning lights on the dash as soon as the trailer is plugged in
  • One side of the trailer working and the other not

Fitting

Most plug and play looms fit with basic tools in about the time it takes to remove a few trim panels. Our team fits wiring with towbars at the South Windsor showroom, and you can shop the bars themselves in towbars.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What is a plug and play trailer wiring harness?

It is a loom that connects to existing plugs in the vehicle's rear wiring, so the trailer lights work without cutting or splicing factory wires.

Do I need a harness with an ECU module?

Most late model vehicles do. Their lighting is computer controlled, and the ECU module stops the trailer's load from causing faults or warnings.

My trailer lights work, but the car shows a warning. Why?

The vehicle is likely detecting the trailer's extra load on its lighting circuits. A harness with an ECU module usually fixes this.

What is the difference between a 7 pin flat and a 12 pin plug?

The 7 pin flat is the standard plug for light trailers. The 12 pin carries extra circuits, such as reversing lights and auxiliary power, and is common on caravans.

Will the harness run my electric trailer brakes?

No. Electric brakes need a separate brake controller installed in the tow vehicle.

Will a universal harness work on my vehicle?

It can, but it needs to be connected to the vehicle's lighting circuits, so professional fitting is recommended.

Can you fit the wiring when you fit my towbar?

Yes. Our team fits towbars and wiring together at our South Windsor showroom in Sydney.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.