Collection: Nissan Navara Storage and Tub Accessories

Tub liners, the HSP load slide, tailgate locks and assist struts for the Nissan Navara, covering the D23 NP300 before and after its 2021 facelift and the new D27, with a fitting order that saves a second visit.

Showing products for your

Showing 10 of 10 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

What Changed at the Back in 2021

The D23 NP300 had a long run, from 2015 to early 2026, and its facelift around the start of 2021 changed more at the rear than most owners realise. The tub became 45 mm deeper and the new rear bumper gained a built in step. Our listings follow that. Liners split between 2015 to 12/2020 and 01/2021 to 03/2026, HSP's Tail Lock splits at 2020 and 2021, and HSP's assist kit changes from a twin strut to a single strut design. A few items still span the whole D23 run, including the HSP Load Slide and the Navara central locking kit. Then there is the D27 from March 2026, built on the current Mitsubishi Triton, which has its own liner and tailgate lock.

Lining the Tub

For a D23, the liner has to match the tub depth, which is why early and facelift versions are separate. Some facelift grades already have one, as the ST-X shares a plastic tubliner with the Pro-4X. If yours is bare, choose from the Navara bed liners, which also include one for the D27 from 2026.

A liner is worth it on a Navara that carries loose gear. Toolboxes, gas bottles and pavers slide around on bare paint and chew through it quickly, and rust starts wherever the steel shows. A moulded liner takes that wear, gives the slide a clean surface to sit on and comes out if you ever want to sell the ute with a tidy tub.

One Slide for Every D23 Dual Cab

HSP lists a single load slide for D23 dual cabs from 2015 to 03/2026, so early and facelift utes share it. It sits on the floor, on top of whatever liner is fitted, and runs out over the tailgate so you are not climbing in to reach a fridge or toolbox at the front of the tub. It is not listed for the King Cab or the D27. On a facelift ute, the extra tub depth leaves a little more room above the slide for taller loads under a cover. Compare it with slides for other utes in tub slides.

Tailgate Locks Across Three Fitments

Navara tailgate locking comes in more forms than any other part here:

  • the Navara central locking kit for 2015 to 03/2026 D23s
  • HSP's Tail Lock for 2015 to 2020 dual cab and King Cab utes
  • HSP's Tail Lock for 2021 to 03/2026 dual cabs
  • a plug and play kit for the D27 from 03/2026

HSP's lock sits inside the tailgate, plugs into the existing wiring and works from the factory remote. King Cab owners should note that only the early HSP version lists their body. See the full set in Navara tailgate central locking.

Fleet buyers have a useful option here. Because the Navara central locking kit spans every D23 from 2015 to 03/2026, a business running a mix of early and facelift utes can fit the same part across the whole fleet, keep one spare on the shelf and give every driver the same routine. The HSP locks are made separately for each half of the run, so they suit owners who want HSP's design on one ute and know its build date. Either way, a tub cover or canopy only keeps tools safe if the tailgate behind it is locked too.

Twin Struts Early, One Strut Later

Early D23s get HSP's twin strut kit, which slows the tailgate down and helps you lift it back up. On the facelift, HSP's kit is a single strut that dampens only. It is easy to order the wrong one on a 2020 or 2021 build, so check the build month. Browse kits for every ute in tailgate assist kits.

Fitting Order for a D23

  1. Settle the liner, factory or ours.
  2. Lay in the HSP slide.
  3. Fit the tailgate lock and assist kit together, since both work on the tailgate rather than the floor.

If a canopy or roller cover is coming too, floor work is easier in an open tub, so do the liner and slide first. A trade D23 with tools in the back usually puts the lock first in priority, while a family tourer often starts with the liner and slide and adds the tailgate parts later.

D27 Owners

The D27 shares its underpinnings with the Triton, but its tub parts here carry Navara titles, so order those. The liner and the plug and play lock are listed now. The lock kit connects to the D27's factory wiring rather than being spliced in, which keeps the install tidy on a brand new ute. Ask us about slides and struts for the D27 before ordering anything else, and bring the build details so we can check the newest listings.

More for other utes is in storage and tub accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

My 2021 ST-X came with a tub liner. Do I need another?

Usually not. The facelift ST-X has a plastic tubliner from the factory, so you can move straight on to the slide, tailgate lock and assist kit.

Will the liner from my 2019 D23 fit a 2022 facelift?

No. The facelift tub is 45 mm deeper, and our liners are split at 12/2020 and 01/2021 to suit each depth.

Does the HSP slide fit both early and facelift D23s?

Yes. The slide is listed for dual cab D23s from 2015 to 03/2026, so it covers both. It is not listed for the King Cab.

I drive a 2018 King Cab. Can I lock the tailgate?

Yes. HSP's Tail Lock for 2015 to 2020 D23s lists the King Cab as well as the dual cab.

My facelift tailgate assist only has one strut. Is that right?

Yes. HSP's kit for 2021 to 03/2026 D23s is a single strut that controls the drop. The twin strut kit, which also helps with lifting, is for 2015 to 2020 utes.

Will my D23 tub gear move to a new D27?

No. The D27 has a different tub and tailgate, so it takes its own liner and its own plug and play central locking kit.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.