Collection: LDV T60 Storage and Tub Accessories

Tailgate locks, twin strut assist kits and the HSP load slide for the LDV T60 and T60 MAX, with standard tub and Mega Tub fitments, the black tailgate cap and the 2024 barrel lock change explained.

Showing products for your

Showing 6 of 6 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Small Parts That Change How a T60 Works

Since its 2017 launch, the T60 has won over tradies, fleets and families who want a big dual cab that does not stretch the budget. Most of them use the tub hard. The three upgrades in this collection target the parts of the day that get old quickly: walking back to lock the tailgate, catching it as it drops, and climbing into the tub to reach a toolbox at the front. A tailgate lock, an HSP Tail Assist and an HSP Load Slide deal with each in turn, and the right version of each depends on three details of your ute.

Detail One: Standard Tub or Mega Tub

The Mega Tub's tub is more than 250 mm longer than the standard T60's, though the width is shared, with both measuring 1,510 mm across and 1,131 mm between the wheel arches. That length matters for some items and not others. Both HSP Tail Assist kits and the 2018 to 2023 HSP Tail Lock list the Mega Tub alongside the dual cab. The HSP Load Slide is listed for the standard dual cab from 2018, so Mega Tub owners should call us before ordering it.

Detail Two: The Tailgate Cap

LDV gave the MAX a black tailgate cap, and HSP's assist kits split on it. One twin strut kit suits dual cab and Mega Tub utes with the black MAX cap. The other suits T60 dual cabs from 2018 to 2021 and Mega Tubs from 2019 to 2022, before the cap. Walk to the back of your ute and look at the top edge of the tailgate. Both kits use two struts, so either way the tailgate lowers under control and takes less effort to lift. Compare them in tailgate assist kits.

Detail Three: Barrel Lock or Not

Tailgate locking follows the barrel lock. The central locking kit listed for T60 and T60 MAX utes from 2018 is made for tailgates without a barrel lock. HSP's Tail Lock comes in a version for 2018 to 2023 dual cabs and Mega Tubs, and another for 2024 on utes with a barrel lock. HSP's lock is fitted inside the tailgate without drilling and works off the factory remote, so the tailgate locks when the doors do. Choose from T60 tailgate central locking.

A barrel lock on a 2024 or later ute is not a reason to skip this. The key barrel only works when someone turns it, and the HSP version for those utes keeps the barrel while adding remote locking, so a forgotten tailgate stops being a risk. It matters most on a T60 wearing a roller shutter or hard lid, because a locked cover with an unlocked tailgate below it still leaves a way into the tub.

Where the Slide Earns Its Place

On a T60 with a roller shutter or canopy, the front of the tub is the hardest place to reach. An HSP Load Slide rolls the floor out over the tailgate, so a fridge, compressor or tool kit comes to you. It sits on the tub floor, so plan it before you add anything else down there. Even with a canopy whose side windows lift up, the gear against the bulkhead stays out of arm's reach, and the slide is what brings it within range without anyone kneeling in the tub. Slides for other utes sit in tub slides.

Keep payload in mind. A slide, a fridge and a full water tank all count against it, and on the 2025 range LDV quoted 830 kg for the MAX Plus and 800 kg for the Mega Tub. A roller shutter and the towball download take more again.

Trade Ute or Family Tourer

A trade T60 with tools in the back usually starts with the tailgate lock, since an unlocked tailgate is the easiest way into a covered tub. A family tourer more often starts with the slide, which makes unpacking at a campsite quicker. Fleets with a mix of pre MAX and MAX utes should order assist kits ute by ute, because the tailgate cap decides which one fits.

A Simple Fitting Order

  1. Fit the slide while the tub is empty, if you want one.
  2. Add the tailgate lock and assist kit together, since both work on the tailgate rather than the floor.
  3. Fit a roller shutter or canopy before or after, as neither of the tailgate items gets in its way.

What About the 2027 T60?

The update due from October 2026 brings new panels from the windscreen forward but keeps the tub and body sides. Rear fitments such as slides, locks and struts should carry across, but we confirm each part against the build before you order.

More tub gear for other utes is in storage and tub accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

I have a T60 MAX Plus Mega Tub. Which tail assist suits it?

The twin strut kit for dual cab and Mega Tub utes with the black MAX tailgate cap. The other kit is for earlier T60s built before the cap.

My 2024 T60 has a barrel lock. Which tailgate lock do I need?

HSP's Tail Lock for 2024 to current utes, which is made for tailgates with a barrel lock.

Which lock suits a 2020 T60 without a barrel lock?

The central locking kit for T60 and T60 MAX utes from 2018, made for tailgates without a barrel lock, or HSP's Tail Lock for 2018 to 2023 dual cabs and Mega Tubs.

Will the HSP slide fit a Mega Tub?

It is listed for the standard dual cab from 2018. Call us before ordering for a Mega Tub, since that tub is over 250 mm longer.

Can I fit the HSP Tail Lock myself?

Many owners do. It plugs into the existing wiring and needs no drilling. We can also fit it at South Windsor.

Will these parts suit the 2027 T60?

The tub and body sides carry over, so rear fitments should transfer. Send us the build details and we will confirm each part before you order.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.