Collection: Weather Shields

Four piece weather shields, also known as window visors, for dual cab utes including the HiLux, Ranger, Triton, D-MAX, BT-50, D23 Navara and NF Amarok. Leave the glass open a little in the rain, vent a hot cabin and fit them without drilling.

Showing products for your

Showing 10 of 10 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Fresh Air in Any Weather

A weather shield is a curved visor that runs along the top of the door frame and overhangs the window opening. With the glass lowered slightly, rain running down the side of the cab is shed by the visor instead of dripping onto the door trim, the window switches and your elbow. That small gap does several jobs:

  • Parked in summer: a cracked window lets built up heat escape while the ute sits on a job site or in a shopping centre car park.
  • Wet mornings: moving air through a slightly open window helps clear a misted windscreen without relying on the air conditioning alone.
  • Highway driving: with the windows just down, the visor smooths airflow past the opening, so you get ventilation with less buffeting than an unshielded window.
  • Passengers and dogs: rear visors let the back seat breathe on a damp day without soaking whoever, or whatever, is sitting there.

What Comes in a Set

Each set in this collection is a full four pieces for the front and rear doors of a dual cab. The visors are injection moulded plastic, with dimensions taken from laser scans of the vehicle so the curve matches the frame closely. They fix on with the double sided tape supplied in the kit, so there is no drilling, and the supplier recommends an adhesion primer for the strongest possible bond. Because the sets are made for four door dual cabs, they will not suit single cab, extra cab, space cab or King Cab bodies with different door shapes.

Why Door Frames Decide Fitment

Unlike a bonnet guard, a window visor is matched to the door, and manufacturers rarely change doors in a facelift. A new grille or bonnet leaves the window line alone, so a single set often covers a whole generation, and the split comes when the cabin itself is redesigned. The listings show the pattern clearly:

  • Ford Ranger: one set for the PX series from 2011 to 07/2022, then a separate set for the RA Next Gen from 08/2022. See our Ford Ranger window visors.
  • Toyota HiLux: the N80 is covered from 2015 to 12/2025, and the new generation HiLux has its own set from 2026. Both are in HiLux weather shields.
  • Mitsubishi Triton: the MQ and MR share one set from 2015 to 2023, while the all new MV body from 2024 takes its own. Browse visors for the Triton.
  • Nissan Navara: one set spans the D23 NP300 from 2015 to 03/2026, before and after its 2021 facelift.
  • Isuzu D-MAX: a single set from 08/2020 to current, so the 2024 update needs nothing new. View D-MAX weather shields.

Shared Platforms, Separate Listings

Two pairs of utes are worth a closer look. The current Mazda BT-50, launched in 2020, is built on the Isuzu D-MAX platform, and the NF Volkswagen Amarok was developed with Ford on Next Gen Ranger underpinnings. Even so, we list a set for each badge: the BT-50 set from 08/2020 and the Amarok set for the NF from 04/2023. Order the one named for your vehicle so the fit and the instructions match the ute in your driveway. The first generation Amarok is not covered by that set.

Fitting Them So They Stay Put

Tape only performs as well as the surface underneath, so preparation is most of the job.

  1. Wash and dry the door frames, then degrease the strip where the tape will sit.
  2. Hold each visor in place before peeling any backing, and mark its position with a little masking tape.
  3. Apply adhesion primer to the frame, let it dry as directed, then press the visor home firmly along its full length.
  4. Fit on a dry, mild day rather than in the cold or damp, and give the tape a day or two to build strength before pressure washing or tackling corrugations.

Afterwards, run each window through its full travel to confirm the glass clears the visor. If your ute has towing mirrors or mirror extensions, mention it when ordering, as they can sit close to the front visors on some models.

Living With Them

Clean visors with ordinary car wash and a soft cloth, avoid solvent cleaners and keep a pressure washer nozzle well back from the tape edge. In heavy rain at speed, keep the gap small, because wind driven rain can still find its way in through a wide opening.

If a visor ever lifts at one end, resist pressing it back down on the old tape, which will not bond a second time. Peel it off, clean away the residue, prime the frame again and refit it with fresh automotive double sided tape, or bring the ute in and we will sort it.

Weather shields sit with the rest of our exterior range under protection and accessories, alongside bonnet guards and side steps.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

How far can I leave the window open in the rain?

A gap of a few centimetres is the usual sweet spot. Open it wider and wind driven rain can get past the visor, particularly at highway speed.

Will these fit my single cab or extra cab ute?

No. Every set here is a four piece kit for dual cab doors. Call us with your cab style and we will check what is available.

Do I need to drill the door frames?

No. The visors attach with the double sided tape in the kit, and an adhesion primer is recommended for the strongest bond.

Will I need new shields after my ute's facelift?

Usually not, because facelifts tend to leave the doors alone. The D-MAX and the D23 Navara, for example, keep one set across their updates. A full redesign, like the move from PX to Next Gen Ranger, needs a new set.

Are BT-50 and D-MAX weather shields interchangeable?

The two utes share a platform, but we list a set for each. Order the one named for your vehicle, and call us if you are unsure.

Can you fit weather shields for me?

Yes. NSW customers can have them fitted at our South Windsor showroom, often alongside other exterior accessories.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.