Collection: Mazda BT-50 Roller Shutters

Roller shutters for the Mazda BT-50 dual cab, covering the model sold from 2011 to 08/2020 and the current BT-50 from 08/2020. Pick an electric cover from HSP, EGR or Oztrax or a manual shutter from EGR or Oz Canopies & 4x4, matched to your sports bar.

Showing products for your

Showing 13 of 13 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Two Very Different Generations

The BT-50 changed partners in 2020. The model sold from 2011 to 08/2020 was developed alongside Ford's PX Ranger, while the current BT-50 from 08/2020 shares its underpinnings with the Isuzu D-MAX. The tubs are different, so every shutter here is listed for one generation only, and none of them should be swapped across to the Ranger or the D-MAX on the strength of the shared platform. Your compliance plate gives the build month, which is what decides the cover. Note that HSP's listings for the earlier model start at 2013, so owners of a 2011 or 2012 BT-50 choose from the EGR, Oztrax and manual covers, which are listed from 2011.

Sports Bars and HSP Versions

HSP builds its Series 3.5 BT-50 covers around the bar behind the cab. The 2013 to 2020 dual cab has a version for the genuine Mazda sports bar and one for no bar. The current BT-50 adds an Armour sports bar version to the genuine and no bar options. If you are about to change bars, settle that first, because the cover is made to sit with one bar style. The HSP Armour bar and other options are in BT-50 sports bars. HSP covers the unit with a 2 year warranty, extended to 3 years when the cover is registered on HSP's website.

Electric Options

All three electric brands are listed for both generations:

  • HSP Roll R Cover Series 3.5, with versions for each bar style
  • EGR Rolltrac, one version for 2011 to 08/2020 and one for 08/2020 to Current
  • Oztrax, our electric shutter, in matching versions for each generation

An electric shutter needs a power lead from the battery, which we run during the fit. It earns its keep on a BT-50 that is opened many times a day, or one that is shared by drivers who might not latch a manual cover. Browse them in BT-50 electric roller shutters.

If load bars are part of the plan, choose HSP, because its bars are made for the Roll R Cover. If you would rather not match a cover to a bar, EGR and Oztrax each come as a single version per generation.

Manual Options

EGR's manual Rolltrac is listed for the BT-50 from 2011 to 2019 and from 2020 to Current, and our manual shutters cover 2011 to 2020 and 08/2020 onwards. With no motor or wiring, a manual cover is quick to fit and has little to go wrong, and it locks at the tailgate. If your BT-50 was built in 2020, check the month carefully, because the generation change falls in the middle of that year. Browse them in BT-50 manual roller shutters.

Before You Order

  • Build month. Before or after 08/2020.
  • Year. Utes from 2011 and 2012 choose from the EGR, Oztrax and manual covers.
  • Bar. Genuine Mazda sports bar, Armour bar or none.
  • Liner. Mention any over rail liner, since it can lift the rails. BT-50 tub liners are listed separately.

Load Bars and the Rest of the Tub

HSP load bars are listed for the 2013 to 08/2020 dual cab and the dual cab from 08/2020. They mount on the Roll R Cover and carry long items above it, and you will find them in BT-50 tub cross bars. To finish the tub:

If you are torn between a shutter and something lighter, compare BT-50 hard lids and BT-50 soft tonneau covers. A soft tonneau is the light, low cost option, a hard lid gives a flat top, and a shutter is the one that opens the full height of the tub.

Day to Day

The canister takes a little floor length behind the cab, so measure long loads with it in mind. Rolling the cover part way back is handy for a tall item, and it locks again in seconds. Keep the drains clear and rinse grit from the side tracks after dirt or beach driving so the slats keep moving freely.

Fitting and Delivery

Expert fitting in NSW is available at our South Windsor showroom, and we send shutters Australia wide for owners with their own installer. Afterpay and Zip are available. We are a family owned business, fitting utes since 1998, with 700+ five star Google reviews. The rest of the range is in Mazda BT-50 accessories. Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Will a Ranger or D-MAX shutter fit my BT-50?

Order a cover listed for the BT-50. The platforms are shared, but the shutters here are made and listed for the BT-50 tub.

My BT-50 was built in 2012. Can I get an HSP cover?

HSP's listings for the earlier BT-50 start at 2013. For a 2011 or 2012 ute, look at the EGR, Oztrax and manual covers, which are listed from 2011.

Is there a cover for the genuine Mazda sports bar?

Yes. HSP makes Series 3.5 versions for the genuine sports bar on both the 2013 to 2020 model and the current BT-50.

Which generation is my 2020 BT-50?

It depends on the build month. Utes built before 08/2020 are the earlier model, and those from 08/2020 are the current one. Check the compliance plate.

Can I add load bars to the shutter?

Yes, to the HSP Roll R Cover. HSP lists load bars for both generations of the dual cab.

How long is the HSP warranty?

2 years on the unit, or 3 years if you register the cover with HSP.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.