Collection: Tub Cover Accessories

The parts that make a tub cover work with your ute. HSP Roll Mate manual roll up covers, sports bar adaptor kits for Oz Canopies & 4x4, EGR RollTrac and HSP covers, a hard lid central locking kit, and rail adapters for the Next Gen Ranger and RAM.

Showing products for your

Showing 24 of 26 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Where a Cover Meets the Rest of the Ute

A roller shutter or hard lid is rarely the only thing at the back of a ute. There may be a factory sports bar behind the cab, a cargo rail system inside the tub, storage bins over the wheel arches, or a central locking system the cover ought to follow. This collection holds the parts that bridge those gaps, along with HSP's manual Roll Mate for owners who want a hard top without a motor.

HSP Roll Mate: A Manual Hard Cover

The Roll Mate is HSP's hand operated roll up cover. Its curtain is made from cut resistant aluminium slats with a vinyl bonded top, running in aluminium side rails that mount to factory points or clamp on. There is no motor, switch or wiring, so nothing draws on the battery or calls for an auto electrician. That suits shared work utes and owners who would rather not wire anything into a newer vehicle's electrics. A quick release lets you lift the whole curtain out when a tall load needs the full tub. Seals along the rails keep weather off the top, although the tailgate end of the tub stays open to dust unless you add a seal kit there.

Two limits to plan around:

  • It carries no load. HSP is clear that the Roll Mate is not weight bearing, so nothing rides on top. If you want bars over the tub, an electric roller shutter with matching tub cross bars is the setup to look at.
  • Sports bars need checking. The curtain can clash with some bars as it rolls back, which is why HSP makes adaptors for genuine bars.

The Roll Mate is listed for the RA Ranger and Raptor from 08/2022, NF Amarok from 2023, GWM Cannon from 2020, Triton MV from 01/2024, LDV T60 from 2017 and the D23 Navara from 01/2021 to 03/2026. The MV version lives in Triton tub cover accessories.

Sports Bar Adaptor Kits

Most owners with a sports bar want to keep it once a cover goes on, and the adaptor that makes it possible is always specific to the cover brand.

  • Original Sports Bar Adaptor Kit: refits a factory sports bar, or one of our aftermarket bars, onto an Oz Canopies & 4x4 roller shutter. It comes with the nuts and bolts required, and the hardware varies by vehicle, so add your make and model to the order notes. It does not suit the EGR or HSP covers we sell.
  • Original Sports Bar Adaptor Kit for the N90 HiLux: the same idea for the Next Gen HiLux, which comes with a factory bar on some grades. Find it among HiLux tub cover accessories.
  • HSP Roll Mate OEM Sports Bar Adapter Kit: pairs a Roll Mate with genuine A frame sports bars, mounting to existing factory points without drilling the tub or the bar.
  • EGR RollTrac Sports Bar Adaptor Kit: made for owners running an EGR RollTrac who want a sports bar on the same tub.

Rail Adapters

Two kits solve rail conflicts on particular vehicles. On the Next Gen Ranger and Raptor, selected grades leave the factory with Ford's cargo management system, a set of rails and sliding cleats inside the tub. The mounting kit lets that system keep working once an HSP cover is installed. On the RAM 1500 DT with RamBox storage, some trucks carry silver side cargo rails rather than the usual black, and the adapter kit lets an HSP Roll R Cover mount to them. Trucks with black rails can skip it. Without the right adapter, either the cover will not seat properly or the factory feature has to come out.

Central Locking for Our Hard Lid

The Central Locking Kit for the Oz Canopies & 4x4 aluminium hard lid ties the lid into the ute's central locking, so it secures with the remote along with the doors. Pair it with tailgate central locking and the whole tub locks with one press.

Getting the Right Part First Time

Because these parts sit between two products, both need to be known before ordering. Have these details ready:

  1. Make, model and build month from the compliance plate
  2. Cover brand and series, such as Oz Canopies & 4x4, EGR RollTrac or HSP Roll R Cover
  3. Sports bar type: genuine, aftermarket or none
  4. A photo of the tub rails and the back of the cab if you are unsure

Send those through and we will confirm the part before it ships.

Fitting

Adaptor kits and rail adapters bolt up with hand tools, though the cover usually has to be loosened or lifted while they go in. That makes it sensible to order the cover and its hardware together. NSW customers can have both fitted together at South Windsor, which saves a second trip, and the rest of the tub can be planned from storage and tub accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Is the Roll Mate electric?

No. It is fully manual, with no motor, switch or wiring. You open and close it by hand and can lift the curtain out using the quick release.

Can I carry a kayak or rooftop tent on the Roll Mate?

No. HSP states it is not weight bearing. Carry loads over the tub on bars made for a load rated cover instead.

Will the Original Sports Bar Adaptor Kit fit my HSP or EGR cover?

No. It is made only for Oz Canopies & 4x4 roller shutters. HSP and EGR covers use their own adaptors.

My Next Gen Ranger has Ford's cargo rails. Do they have to go for a cover?

The cover can go on with the system removed, but the mounting kit lets you keep using the rails and cleats underneath it.

How do I know if my RAM needs the adapter kit?

Look at the rail along the inside top of the tub sides. Silver rails on a DT with RamBox need the kit, while black rails do not.

Can my hard lid lock with the ute's remote?

On an Oz Canopies & 4x4 aluminium hard lid, yes, using the central locking kit in this collection. For other brands, ask us.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.