Collection: Mitsubishi Triton Towbars

Heavy duty towbars and wiring harnesses for the Mitsubishi Triton. Our range covers the new MV generation (2024+), MR (2019 to 2024) and MQ (2015 to 2019) models with receiver hitch and tongue towbar options rated up to 3,500 kg braked towing capacity.

Showing products for your

Showing 10 of 10 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Mitsubishi Triton Towbar Range

The Mitsubishi Triton is one of Australia's most popular towing vehicles. Whether you are towing a camper trailer for weekends away, a boat to the ramp, a car trailer for work or a heavy plant trailer on the job, a properly rated towbar matched to your Triton's towing capacity is essential for safe, legal towing.


At Oz Canopies & 4x4, we carry towbars specifically designed for each Triton generation. Every towbar meets Australian towing standards and is engineered for the Triton's chassis mounting points to deliver the full rated towing capacity without compromise.

Which Triton Generation Do You Have?

Towbar fitment is generation specific. The chassis and mounting points differ between Triton generations and a towbar designed for the MQ will not correctly fit the new MV.

MV Triton (2024 to Current)

The all new Triton launched in 2024 with a completely redesigned chassis. The MV has a braked towing capacity of 3,500 kg, up from 3,100 kg on the outgoing MR. This increase means the towbar and mounting hardware are different from previous generations. The MV requires a towbar specifically engineered for its new chassis.

MR Triton (2019 to 2024)

The facelifted fifth generation Triton with a 3,100 kg braked towing capacity. MR towbars are generally cross compatible with the MQ generation as they share the same chassis.

MQ Triton (2015 to 2019)

The fifth generation Triton in its original form with a 3,100 kg braked towing capacity. MQ and MR towbars are typically interchangeable.

Towbar Types for Mitsubishi Triton

Receiver Hitch Towbars

The most popular option for Triton owners. A receiver hitch towbar uses a removable tongue that slides into a square receiver (typically 50 mm / 2 inch). This gives you flexibility to swap between tow ball tongues, add a bike rack or cargo carrier and remove the tongue entirely when not towing. The receiver hitch is tucked under the rear bumper for a clean appearance.

Tongue Towbars

Fixed tongue towbars have the tow ball mount permanently attached to the bar. They are a straightforward, cost effective option for owners who tow regularly and want a simple, always ready setup.

Towing Capacity and Compliance

Every towbar has a rated towing capacity that must match or exceed the weight of what you are towing. The towbar rating, your Triton's towing capacity and the trailer's Aggregate Trailer Mass (ATM) all need to align. Exceeding any of these ratings is unsafe, illegal and voids your insurance.


The new MV Triton's increase to 3,500 kg braked towing capacity brings it in line with the Ford Ranger, Toyota HiLux and Isuzu D-MAX. The older MQ and MR models at 3,100 kg should be matched with towbars rated for at least 3,100 kg and you should not exceed this even if the towbar itself has a higher rating.

Towbar Wiring for Mitsubishi Triton

Modern Tritons use CAN bus electronics, which means you need a vehicle specific wiring harness or bypass module to connect tow bar wiring without triggering error codes on the dashboard. We stock plug and play wiring harnesses for the Triton that integrate with the vehicle's electronics cleanly.


Standard 7 pin flat connectors suit light trailers. For caravans and camper trailers that require electric brakes, auxiliary power and fridge circuits, a 12 pin round connector is the standard setup. Many Triton owners fit a dual socket bracket with both connectors to cover all trailer types.

Fitment and Delivery Information

Vehicle Compatibility

Triton towbars are generation specific (MV, MR or MQ). Confirm your generation before ordering. Our team can verify fitment for your Triton.

Professional Fitment Available

We offer Triton towbar and wiring installation at our Sydney showroom. Professional fitment ensures correct torque, wiring integration and compliance. Call 02 9627 8666 or text 0440 130 098 for details.

Delivery Australia Wide

Triton towbars and wiring kits ship Australia wide. Contact us for delivery estimates.

Have questions?

Will an MQ/MR Triton towbar fit the new MV?

No. The MV Triton (2024+) has a redesigned chassis with different mounting points. MQ and MR towbars will not fit the MV. You need a towbar specifically designed for the MV generation.

Are MQ and MR Triton towbars interchangeable?

Yes. The MQ (2015 to 2019) and MR (2019 to 2024) share the same chassis, so most towbars are cross compatible between these generations.

What is the towing capacity of the Mitsubishi Triton?

The new MV Triton (2024+) has a 3,500 kg braked towing capacity. The older MQ and MR models are rated at 3,100 kg. Never exceed your vehicle's rated towing capacity even if the towbar has a higher rating.

Do I need a wiring harness for my Triton towbar?

Yes. The Triton uses CAN bus electronics and requires a vehicle specific wiring harness or bypass module. We stock plug and play harnesses that integrate with the Triton's electronics without triggering dashboard errors.

What connector type do I need?

A 7 pin flat connector suits light trailers. A 12 pin round connector is needed for caravans and camper trailers with electric brakes, auxiliary power and fridge circuits. A dual socket bracket covering both is the most versatile option.

Can I fit a towbar to a Triton with a tow rated rear bumper?

Genuine Mitsubishi tow rated bumpers may include integrated tow points, but aftermarket towbars provide a wider range of options including receiver hitches and higher rated setups. Our team can advise on the best option for your Triton.

How much does it cost to fit a towbar on a Triton?

Towbar pricing varies by type (receiver hitch or tongue) and generation. Contact our team for a quote including the towbar, wiring and professional installation.

Can you install a towbar on my Triton?

Yes. Professional installation is available at our showroom, 20 Walker Street, South Windsor NSW 2756. Call 02 9627 8666 for details.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.