Collection: Kia Tasman Accessories

Accessories for the Kia Tasman pickup and cab chassis: steel and aluminium canopies, roller shutters, a hard lid and clip on soft tonneau, a sensor compatible nudge bar, side steps, a roof platform, towbars, genuine wiring, KING wheels and tyres, all listed for the Tasman from its 2025 launch.

Showing products for your

Showing 24 of 57 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Kitting Out Kia's First Ute

Kia opened Australian orders for the Tasman in April 2025, delivered the first pickups in July and added a dual cab chassis in August. Every Tasman sold here so far runs a 2.2 litre turbo diesel making 154 kW and 440 Nm through an eight speed automatic, across grades from the two wheel drive S up to the X-Pro. That spread brings in fleet buyers and tradies at one end and families moving out of an SUV at the other, so builds range from bare work utes to full weekend touring setups.

With no earlier Kia ute to borrow from, nothing carries over from another model. Every part in this collection is listed for the Tasman itself, and the titles say which body and build date each one suits. Read them before ordering, particularly if you drive a cab chassis.

Start With the Tub

The pickup tub measures 1,512 mm long, 1,572 mm wide and 540 mm deep, and it takes a standard Australian pallet between the arches. Payload sits a little over one tonne on most versions, although pickups can be ordered with a sub one tonne rating for novated leasing, so check your compliance plate before planning a heavy build. Decide first whether you want a canopy or a low cover, because that choice decides where your long gear rides.

A Canopy for Work or Touring

A canopy gives lockable, standing height storage for tools, camping kit or a dog. Our heavy duty black canopies for the 2025 on Tasman come in steel and aluminium; compare both in the Tasman canopy range or go directly to the steel canopy for the Tasman. Pet friendly steel sliding side windows made to suit our Tasman canopy are listed separately for the driver and passenger sides under Tasman canopy parts, a worthwhile upgrade for anyone carrying a working dog. Note that storage units, kitchen units and tradesman racks do not fit our Tasman canopies, so plan the inside around loose gear.

Covers That Keep the Ute Profile

If you would rather keep the tub flat, choose from the Oztrax electric roller shutter, a manual roller shutter, the Oz Canopies & 4x4 aluminium hard lid in black and a clip on soft tonneau. Shutters are under roller shutters for the Tasman, the lid under Tasman hard lids and the soft cover in the clip on Tasman tonneau collection. Higher grades have a 240V outlet in the tub, so plan how you will reach it once a cover is fitted.

With a low cover, the cab roof becomes the main place for long items. Our roof rack platform tray kit uses a backbone style mount made for the Tasman; see it under Tasman roof platforms.

Front End and Side Steps

The matte black Tasman nudge bar is listed as sensor compatible, so it suits vehicles with front parking sensors. Find it in nudge bars for the Tasman. For getting in and out, choose between Stingray super heavy duty steel side steps and heavy duty aluminium running boards, both listed for the Tasman, in Tasman side steps. Steel is the heavier duty choice and aluminium the lighter one.

Towing Gear Rated for 3,500 kg

Kia rates the Tasman to tow 3,500 kg braked. The pickup's rear bumper has built in steps, and the towbar we list for the tub body is made to suit that step bumper. TAG's Extreme Recovery (XR) towbar is listed in two forms, one for the pickup and one for the cab chassis, both for April 2025 on builds. Finish the job with the genuine Kia towbar wiring.

Shop the bars in Tasman towbars, the plug and harness under Tasman trailer wiring, and everything for towing in one place under Kia Tasman towing gear.

Planning the Tasman Build Step by Step

Most Tasman builds go smoothly in this order:

  1. Tub. Choose the canopy, roller shutter, hard lid or soft tonneau.
  2. Roof. With a low cover, add the roof platform for long or bulky gear.
  3. Front and sides. The nudge bar and side steps do not depend on the tub choice, so they can go on at any point.
  4. Towing. Fit the towbar and genuine wiring once you know what the ute weighs loaded.

Leaving towing until last is about weight, not fitting difficulty. On the X-Pro, payload is 1,013 kg, and a canopy, roof platform, nudge bar and side steps all come out of that before a single passenger climbs in. Knowing that figure first helps you choose a trailer the ute can legally pull with a full load on board.

Pickup or Cab Chassis

Canopies, shutters, the hard lid and the soft tonneau are all made for the pickup's tub. Cab chassis owners still have options here, including the TAG XR cab chassis towbar, the nudge bar and the roof platform. Check each title for the body it suits.

Wheels and Tyres for the Tasman

KING wheels listed for the Tasman from 2025 use 6/139.7 or dual drilled rims, from 17 x 8 up to 20 x 9 with offsets from +25 to +40 mm, in designs like the Trekka, Snatch, Armor and Warrior. Tyres from Grenlander and Hilo include 265/65R17, 265/70R17 and 265/60R18, plus LT285/75R16 and LT33x12.5R17 for bigger setups. Wheels and tyres are delivered Australia wide for your tyre shop to fit; we do not fit them ourselves.

Fitting and Delivery

Oz Canopies & 4x4 has been fitting utes since 1998, and the Tasman gets the same attention. Order your canopy or cover, towbar and wiring together and we will fit them in one visit, or we can deliver Australia wide.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What should I fit first on a new Tasman?

The canopy or tub cover. It decides whether long gear goes on a canopy roof or a cab roof platform, and it affects how much payload is left for everything else.

Does the towbar suit the steps in the Tasman's rear bumper?

The towbar we list for the tub body is made for the pickup with the stepped rear bumper. Cab chassis owners need the TAG XR towbar version listed for the cab chassis.

Can I tow 3,500 kg with a canopy fitted?

The braked rating stays at 3,500 kg, but the combined mass limit still applies. Kia quotes a gross combination mass of 6,200 kg and a kerb weight of 2,237 kg for the X-Pro, which leaves only about 460 kg for people, accessories and cargo when towing at the maximum.

Do the pet friendly windows fit any canopy?

They are made to suit the Oz Canopies & 4x4 canopy listed for the Tasman, with the left and right sides sold as separate items. Ask us before fitting them to another brand.

Will the nudge bar stop my parking sensors working?

The Tasman nudge bar is listed as sensor compatible, so it is designed to work with the front sensors. Tell us your grade when ordering and we will confirm the fit.

Electric or manual roller shutter for the Tasman?

The Oztrax electric shutter opens at the press of a button and needs wiring. The manual shutter has no wiring and less to go wrong. Both are listed for the 2025 on Tasman pickup.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.