Collection: BYD Shark 6 Roof Racks and Platforms

Roof racks and cross bar systems for the BYD Shark 6 plug in hybrid ute. The Shark 6 requires roof rack setups that account for its tight payload margins and unique roof profile. Our range is purpose built for the Shark 6 with lightweight options designed to maximise usable carrying capacity.

Showing products for your

Showing 1 of 1 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

BYD Shark 6 Roof Rack Range

The BYD Shark 6's plug in hybrid architecture creates a unique roof rack conversation. With tighter payload margins than diesel utes (approximately 825 kg on the current 1.5 litre model, dropping to approximately 762 kg on the upcoming 2.0 litre), every kilogram of rack and roof cargo directly impacts what else you can carry. Choosing the right rack system means balancing functionality with weight discipline.

At Oz Canopies & 4x4, we carry roof racks designed for the Shark 6's specific roof profile and mounting points.

Payload: The Critical Roof Rack Consideration

On a diesel ute with 1,000 kg+ of payload, a 30 kg roof rack and 50 kg of gear is manageable. On a Shark 6 with 825 kg of payload, that same setup takes 80 kg out of an already tight budget. Add two passengers at 80 kg each, a canopy at 70 kg and a towball download and you are approaching your GVM limit before loading the tub.

This does not mean you cannot use roof racks on the Shark 6. It means you need to be deliberate about what goes up there. Lightweight aluminium cross bars (10 to 15 kg) are a better starting point than a heavy full length cage rack (25 to 35 kg). Every item on the roof should earn its place in your weight budget.

Roof Load Ratings for BYD Shark 6

The Shark 6's dynamic roof load rating should be confirmed in your owner's manual or with BYD directly. As a newer vehicle, the aftermarket is still establishing best practices for roof rack mounting. What is certain is that the dynamic limit (while driving) is significantly lower than the static limit (while parked) and the rack itself counts against that limit.

For Shark 6 owners planning a roof top tent, the static load rating (parked) is what matters for sleeping. The dynamic rating (driving) determines how much the packed down tent and rack can weigh while on the move. A canopy mounted rack is typically the better option for tent setups as it distributes load over the rear axle.

Mounting Options

The Shark 6 accepts cab mounted cross bars via factory rail or track mount systems. If your Shark 6 has a canopy, canopy mounted racks provide more area and better weight distribution. Given the Shark 6's higher kerb weight, keeping heavy loads low and centred is particularly important for handling and stability.

Important: the Shark 6 has high voltage battery components in the chassis. If any drilling is required for rack mounting, confirm the location of high voltage wiring before proceeding. Clamp on and factory point mounting systems avoid this risk entirely.

Types of Roof Racks for BYD Shark 6

Cross bars are the most practical option for Shark 6 owners. They are lightweight, versatile and add minimal drag. Use them for bikes, kayaks, cargo boxes and light loads. Cage and basket racks are available but add significant weight that cuts into the Shark 6's payload. Trade racks are less common on the Shark 6 given its positioning as a lifestyle and dual purpose vehicle rather than a heavy commercial platform.

Fitment and Delivery Information

Vehicle Compatibility

Shark 6 roof racks are specific to the Shark 6 (2025+). Do not use racks from other vehicles. Confirm mounting method (factory rail, track mount or canopy mount) when ordering. Our team can verify fitment.

Professional Fitment Available

We offer Shark 6 roof rack installation at our Sydney showroom. Given the high voltage components, professional fitment is strongly recommended. Call 02 9627 8666 or text 0440 130 098 for details.

Delivery Australia Wide

Shark 6 roof racks ship Australia wide. Contact us for delivery estimates.

Have questions?

Can I fit a roof rack on a BYD Shark 6?

Yes. Cross bars and rack systems designed for the Shark 6 are available. Lightweight options are recommended to preserve payload.

How much payload does a roof rack use on the Shark 6?

Basic cross bars weigh 10 to 15 kg. Full cage racks weigh 25 to 35 kg. This plus any cargo weight comes directly off the Shark 6's tighter payload budget.

Can I fit a roof top tent on the Shark 6?

Yes, but factor the tent weight (50 to 90 kg), rack weight and your total payload carefully. A canopy mounted rack is recommended over a cab mounted setup for tent use.

Is drilling required for roof rack mounting?

Not necessarily. Factory rail mount and clamp on systems avoid drilling. If drilling is needed, confirm the location of high voltage components first.

Does the V2L power affect roof rack wiring?

The V2L system does not interfere with roof rack mounting. However, some owners run 12V accessories on the rack (like a light bar) using V2L or auxiliary power, which requires proper electrical planning.

Do roof racks affect the Shark 6's electric range?

Yes. Roof racks add aerodynamic drag and weight, both of which increase energy consumption and reduce range. The impact is more noticeable on a PHEV than a diesel ute because electric only range is more sensitive to drag.

Can you install a roof rack on my Shark 6?

Yes. Professional installation is available at our showroom, 20 Walker Street, South Windsor NSW 2756. Call 02 9627 8666 for details.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.