Collection: Tub Cross Bars

Tub cross bars and load bars that mount over the tub on a roller shutter, hard lid or sports bar. Shop HSP load bars for the Roll R Cover Series 3.5, cross bars made for the EGR RollTrac, and universal bars for roller shutters, lids and sports bar pipe.

Showing products for your

Showing 28 of 28 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Carry Gear Over the Tub

Tub cross bars turn the space above the tub into usable carrying room, without a canopy and without loading the cab roof. They are ideal for kayaks, surfboards, ladders, pipe and timber, and with the right setup they can carry a roof platform or rooftop tent. Because they sit over the rear axle rather than on the cab, they also keep weight where the ute is built to carry it.

Three Ways Tub Bars Mount

The first thing to work out is what the bars will attach to.

On the cover rails. Most tub bars clamp to the side rails of a roller shutter. These are specific to the cover brand, because each brand uses its own rail profile. HSP load bars are made for the Roll R Cover Series 3.5, and the 150 kg cross bars in this range are made for the EGR RollTrac. A separate pair of cross bars suits other roller shutters and hard lids.

On lid side rails. Some hard lids have side rails that bars can lock into. Our silver cross bars suit lids with side rails, and the rails need to be bought separately if your lid does not already have them.

On the sports bar. Universal cross bars can fit to sports bar pipe, which suits utes that keep the tub open or have a soft cover.

HSP Load Bars

HSP load bars are the biggest part of this range, with versions made for the Roll R Cover Series 3.5 on a long list of vehicles:

  • Popular utes: Next Gen and PX Ranger and Raptor, HiLux SR, SR5 and GR from 2015 (with a separate Rugged X version), D-MAX 2012 to 2020 and 2021 on (dual or space cab), BT-50 2013 to 2020 and 2020 on, Triton MQ and MR and the 2024 Triton, Navara D23 to early 2021 and from 2021, Amarok from 2011 to 2022 and the new Amarok, Cannon, Cannon Alpha, RG Colorado and T60 including the Mega Tub
  • American pickups: RAM 1500 and 2500, F-150 with the 5'5" or 6'5" tub, Silverado 1500 and 2500, Tundra from 2024 and Jeep Gladiator

RAM owners should note there are separate HSP load bars for utes with and without the RamBox storage, so check your tub before ordering.

Matching Bars to Your Cover

A bar made for one cover brand will not lock into another brand's rails. Before ordering, confirm three things: the brand and series of your roller shutter or lid, your vehicle model and generation, and your cab style. If you are buying a cover and bars together, we can match them at the same time from roller shutters and hard lids.

How Much Can They Carry

The bar's rating is only one part of the picture. The cover's own rail rating, the mounting hardware and the way the load is spread all matter, and the lowest rating sets your limit. Spread weight across both bars, keep heavy items low and central, and remember that the load limit while driving is lower than when parked.

Height and Clearance

Bars over the tub usually sit around cab roof height, which makes them a natural match for long loads that also rest on roof cross bars on the cab. Pairing the two gives a long, level carrying platform for ladders and kayaks. Check the total height before heading into car parks or under low branches, especially once a rooftop tent or boat is loaded.

Adding a Platform

For gear that does not suit two bars, such as jerry cans, recovery boards and a camp table, a platform across the bars gives a flat deck with tie down points everywhere. See roof platforms for platforms that suit bar mounting.

Taking Bars Off

Empty bars still add wind noise and drag. Most cover mounted bars unbolt from the rails in minutes, so take them off for long highway trips when you are not carrying anything. Keep the hardware together in a bag in the glovebox so nothing goes missing before the next trip.

Securing the Load

Bars only do half the job. Tie loads down with rated straps at both bars, add front and rear tie downs for kayaks and boards, and check the straps after the first few kilometres as loads settle. The National Transport Commission's Load Restraint Guide sets out the principles for light vehicles, and following it keeps you safe and legal.

Fitting

Most tub bars bolt to the cover rails in under an hour with basic tools. Our team can fit bars along with a cover at the South Windsor showroom, and you can see the wider range in roof racks and platforms.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Will any tub cross bars fit my roller shutter?

No. Bars are made for specific cover brands and rail profiles, such as HSP load bars for the Roll R Cover Series 3.5 or cross bars for the EGR RollTrac.

Can I put cross bars on a hard lid?

Yes, if the lid has side rails. Our silver cross bars suit lids with side rails, which may need to be purchased separately.

Can tub cross bars fit to a sports bar?

Yes. Universal cross bars are available to fit sports bar pipe.

Are there different HSP load bars for the RAM?

Yes. There are separate versions for RAM utes with and without the RamBox.

How much weight can tub cross bars carry?

It depends on the bars, the cover rails and the mounts, and the lowest rating applies. The EGR RollTrac bars in this range are rated to 150 kg.

Can I mount a rooftop tent on tub cross bars?

Often yes, with the right bars and cover. Check the dynamic and static ratings of every part before fitting a tent.

Can you fit tub cross bars for me?

Yes. Our team fits them at our South Windsor showroom in Sydney, often alongside a new cover.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.