Toyota Hilux Trailer Wiring Harnesses

Plug N Play towbar wiring looms for every HiLux since 2005: an early N70 loom, a later N70 loom with a relay, and a loom with an ECU module that covers both the N80 and the N90. All finish in a 7 pin flat plug.

Showing products for your

Showing 3 of 3 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Pick the Loom by Build Month

The N70 looms are split by build date. Utes made before 08/2008 take the plain loom, and those from 08/2008 to 09/2015 take the version with a relay. From 10/2015, when the N80 arrived, a single loom with an ECU module covers the rest of the N80 run and carries straight on to the N90 from 2026. Your compliance plate shows the build month, which is the detail that matters for 2008 and 2015 utes.

What the Relay and Module Do

A relay or module lets the trailer's lights run through their own feed instead of hanging extra load on the HiLux's lighting circuits. All of them plug into factory connectors with no cutting of the vehicle's wiring, and they do not connect to or interfere with any reversing camera or sensors fitted.

Towing Capacity and Brakes

A 4x4 N80 with the 2.8 litre automatic is rated to 3,500 kg braked from the August 2020 update. The N90 keeps 3,500 kg for 4x4 diesels and is rated to 2,900 kg in 4x2 form. A trailer with electric brakes needs a brake controller in the cab as well as the loom. The 7 pin flat plug has a pin for electric brakes, but the controller and its wiring are a separate job. If the bar itself is still on your list, start with our towbars and towing gear.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

I own a 2015 HiLux. Which loom do I need?

It comes down to the month. A ute built up to 09/2015 is an N70 and takes the relay loom. From 10/2015 it is an N80 and takes the ECU module loom.

Does the N80 loom really fit the new N90?

Yes. The ECU module loom is listed from 10/2015 to current, including the N90 from 2026, so a Next Gen HiLux uses the same part as the N80.

Will the loom affect the reversing camera on my SR5?

No. These looms do not connect to or interact with reversing systems, so the camera and any parking sensors keep working as normal.

Can my N90 carry more payload than my N80 while towing at 3,500 kg?

Yes. Toyota lifted gross combination mass on N90 4x4 models from 5,850 kg to 6,300 kg. That leaves more room for gear and passengers when towing at the limit, so check your figures before a big trip.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.