Collection: Towbars and Towing

Towbars, plug and play wiring, tow ball mounts, hitch parts, brake controllers and charging cables. Shop TAG, BTA and Oz Canopies & 4x4 gear for utes, 4WDs, vans and SUVs, then build a towing setup that suits your vehicle, your trailer and the ratings on both.

Showing products for your

Showing 24 of 311 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Four Parts, One Towing Setup

Behind every hitched trailer, four separate systems have to work together before it is safe to pull, and each one has its own category here.

The Towbar

The bar bolts to the chassis and carries the trailer's pull into the vehicle's frame. It holds the safety chain attachment points and, on most ute and 4WD bars, a 50 mm square receiver. Bars are made for one model, generation and rear body, so a tray back ute and a tub ute from the same year often need different parts. Start in towbars for TAG standard duty, heavy duty, 4x4 recovery and Extreme Recovery bars, TAG+ and BTA bars, and our own Oz Canopies & 4x4 bars.

The Hitch

The ball mount slides into the receiver, the tow ball bolts onto the mount, and a pin and clip lock it all in. This is where you set ball height so the trailer rides level, and where an adjustable mount, a 365 mm extender or a receiver cover comes in. Those parts live in hitch accessories and tow ball mounts.

The Wiring

The trailer's tail, brake and indicator lamps need a feed from the vehicle. Most late model vehicles want a plug and play loom with an ECU module, older ones use relays, and some newer GWM models leave the factory with a 13 pin socket that takes a TAG direct fit harness. Find the right one in trailer looms and wiring harnesses.

Brakes and Power

Electric trailer brakes only work with a controller mounted in the cab, and a camper battery or fridge needs its own heavy cable, usually ending in an Anderson plug. Both sit in towing electrical accessories.

The Ratings That Decide What You Can Tow

Your towing limit comes from several numbers set by the vehicle maker, the towbar maker and the trailer builder:

  • Braked towing capacity is the heaviest trailer the vehicle maker allows when that trailer has its own working brakes.
  • Unbraked towing capacity covers a trailer with no brakes. It is capped at 750 kg or the maker's figure, whichever is lower.
  • Tow ball download is the weight the coupling presses down onto the ball. The vehicle, the towbar and the ball mount each set a maximum for it.
  • GVM, gross vehicle mass, is the most the loaded vehicle may weigh, and the download counts toward it.
  • GCM, gross combination mass, is the maker's ceiling for vehicle and trailer together. It can be lower than GVM and towing capacity added up, so a heavily loaded ute may not be allowed to pull its full rated trailer.

Transport for NSW also says the loaded trailer must not weigh more than the lowest of the towbar and coupling rating, the vehicle's towing capacity, the trailer's own rated capacity and what its tyres can carry. The towbar figure is the easy one, because it is marked on the bar. As an example, our GWM Cannon Alpha PHEV heavy duty bars are listed at 3,500 kg towing with 350 kg on the ball.

Know the Trailer as Well as the Vehicle

A trailer's plate shows its ATM, or aggregate trailer mass, the most it may weigh fully loaded. GTM, gross trailer mass, is the share of that weight resting on the trailer's own tyres while hitched. The gap between them is the download, so ATM equals GTM plus download.

Download shifts every time you repack. Western Australia's safe towing guide suggests aiming for roughly 8 to 10 percent of the ATM, staying inside the towbar's limit. Water, batteries and tools belong low and close to the trailer's axles. Too light on the ball and the trailer can wander at speed; too heavy and the back end sags and the steering goes vague. A weighbridge or a tow ball scale takes the guessing out of it.

Choosing Gear for the Trailer You Pull

The trailer writes most of the shopping list.

  • Box trailer, bike carrier or garden trailer. Usually light enough to need no brakes. A standard or heavy duty bar, a lighting loom with a 7 pin flat plug and a fixed ball mount cover it.
  • Boat trailer. Often heavy enough to need brakes. Choose a mount that puts the ball at the coupling's height, and inspect the plug often, because salt water eats pins quickly.
  • Caravan or camper. A heavy duty bar, an ECU module loom, a brake controller and usually an Anderson charging cable. Many vans run a 12 pin plug, so check whether you need an adaptor. A weight distribution hitch can help level a heavy van, but only where the vehicle maker permits one, and never as a cure for a trailer with too much weight on the ball.
  • Off road camper. Look at a TAG 4x4 recovery or Extreme Recovery towbar. These carry their own rated recovery points, so straps attach to the bar and never to the tow ball.
  • Car, plant or tradie trailer. These sit near the top of most ratings, so work out your GCM with the tub or tray loaded the way it will be on the day.

Matching Gear to Your Vehicle

Three details narrow every search: the model, its build date and what sits behind the cab. Ute towbars are split by tub body with a step, tub without a step, tray back and cab chassis, with extended cab chassis versions on some models. Build dates often matter more than badges. The Navara D23 takes different bars either side of 12/2020, and the T60 loom changes in 03/2024. Related vehicles can share parts, too: the current BT-50 and D-MAX take the same towbars and the same loom from 08/2020.

Shop by vehicle for Ford Ranger towing, HiLux towbars and wiring, D-MAX towing gear, BT-50 towbars and looms, Triton towing parts, Navara tow gear, GWM Cannon towing and the HiAce towbar and step combos. Beyond utes, there are bars for the BMW X5, Touareg, Audi Q7, BYD Sealion 6, Ford Territory and Subaru Forester.

Rules Worth Knowing in NSW and Beyond

Light trailers up to 4.5 tonnes ATM are covered by the national Vehicle Standards Bulletin, VSB 1, while towbars and couplings come under ADR 62, the design rule for mechanical connections between vehicles. A few points apply to almost every setup:

  • Marking. A towbar must be permanently marked with its maker's name or trademark, the vehicle make and model or a part number, and its maximum rated capacity in kilograms.
  • Brakes. NSW sets brake rules by GTM. A trailer over 750 kg must have brakes, on both wheels of at least one axle up to 2,000 kg and on every wheel beyond that.
  • Breakaway. Above 2,000 kg GTM, an automatic breakaway system must apply the trailer's brakes if it ever separates from the vehicle.
  • Safety chains. At least one chain under 2,500 kg loaded, and two crossed chains above that.

Most states line up closely, but confirm the details with Transport for NSW or your local authority before a long trip.

Fitting and Pre Trip Checks

Oz Canopies & 4x4 has been fitting out vehicles in Sydney since 1998. NSW customers can have the bar, loom, ball mount and brake controller fitted together at our South Windsor showroom, with the ball height set to suit the trailer and every lamp checked with the trailer connected. Before each trip, Transport for NSW suggests checking tyre pressures, wheel bearings, suspension, brakes, lights and the safety chain connections. Parts also ship across NSW and the rest of Australia for owners who fit their own.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

What is the difference between braked and unbraked towing capacity?

Braked capacity is the maker's limit for a trailer with its own working brakes. Unbraked capacity applies to a trailer without brakes and can never exceed 750 kg, or less if the vehicle maker sets a lower figure.

Why does GCM matter if my ute is rated to tow 3,500 kg?

GCM limits the loaded vehicle and trailer combined, and it can be less than GVM plus towing capacity. A full tub, a canopy and passengers can leave less allowance for the trailer than the towing figure suggests.

What is the difference between ATM and GTM?

ATM is the most the trailer may weigh fully loaded. GTM is the part of that weight carried by the trailer's tyres when it is hitched. The difference between them is the tow ball download.

How much tow ball download should I aim for?

Western Australia's towing guide suggests around 8 to 10 percent of the trailer's ATM, kept within the limits of the vehicle, the towbar and the ball mount. Weigh it rather than guess.

What should be marked on my towbar?

The maker's name or trademark, the vehicle make and model or a part number, and the bar's maximum rated capacity in kilograms.

When does my trailer need brakes and a breakaway system?

In NSW, brakes are needed once the GTM is over 750 kg. Over 2,000 kg, the brakes must act on every wheel and an automatic breakaway system is required.

How many safety chains does a trailer need?

One chain at minimum for trailers under 2,500 kg loaded. Above that, NSW requires two chains, and they must be crossed.

Do you have towbars for SUVs and cars as well as utes?

Yes. Alongside ute bars there are TAG and BTA bars for vehicles such as the Prado, Pajero, Outlander, Mazda CX5 and Kia Carnival, plus vans like the Hyundai iLoad and Staria.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.