-
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Nissan Navara D40 07/2005 – 2016 Low Profile Heavy Duty Steel Black Canopy
Regular price $1,999Sale price $1,999 Regular price -
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Sports Bar Roll Bar With Basket Carrier Platform (Large)
Regular price $439Sale price $439 Regular price$549-20% -
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Plug N Play Nissan Navara D40 10/2005 to 06/2015 Towbar Trailer Wiring Harness Loom with ECU module
Regular price $115Sale price $115 Regular price -
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Nissan Navara D40 Towbar 10/2005 to 06/2015 Tub Body With Step or Tray Back
Regular price $664Sale price $664 Regular price$715-7% -
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Extended Sports Bar With Brake Light
Regular price $549Sale price $549 Regular price -
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Nissan Navara D40 07/2005 - 2016 Heavy Duty Steel Black Canopy
Regular price $1,999Sale price $1,999 Regular price -
Fits your
Fits selected models
Check fitment for your vehicle
Doesn’t fit your
Nissan Navara D40 07/2005 - 2016 Heavy Duty Aluminium Black Canopy
Regular price $2,499Sale price $2,499 Regular price
Where the D40 Sits in the Navara Line
Nissan launched the D40 here in late 2005 and kept selling it until the D23 NP300 took over in 2015, with the older D22 continuing alongside it for most of that time. It was a larger ute than the D22. The main engine was a 2.5 litre turbo diesel, upgraded during the run from 126 kW and 403 Nm to 140 kW and 450 Nm. Early ST-X models offered a 4.0 litre petrol V6, and the ST-X 550 later replaced it with a 3.0 litre V6 turbo diesel making 170 kW and 550 Nm through a seven speed automatic.
Braked towing reached 3,000 kg on the V6 models and the ST dual cab. Check your own compliance plate and owner's manual, because the rating on a D40 depends on engine and variant.
Underneath, every D40 uses a live rear axle on leaf springs. It is tough and simple, but springs that have carried heavy loads for years can sag, which matters when you add a canopy and a full tub of tools.
What Is Worth Fitting to a D40 Now
A D40 today is usually a paid off work ute, a second vehicle or a farm runabout. The parts that earn their place are the ones that keep tools secure and dry and let it tow reliably. That is what this range covers: canopies, a towbar and trailer wiring. Parts made for the D23 and D27, such as roller shutters, bull bars and roof platforms, will not fit, because the body, tub and front end are all different.
Is It a D40 or a Late D22?
Both were sold new from late 2005 to 2015, so the year alone does not settle it. The D40 is the bigger of the two, and its 2.5 litre diesel was rated from 126 kW, where the late D22's version made 98 kW. D40 canopies and towing parts will not fit a D22, so if you are not sure which you own, send through a photo of the ute and the compliance plate before ordering.
Choosing a Canopy for a D40
Three canopies are made for the D40 tub, all finished in black.
Heavy duty steel. The hardest wearing choice for a ute that gets knocked around on site. Steel shrugs off dents from ladders and tools, but it is the heaviest option, so think about how much weight the rear springs already carry.
Low profile heavy duty steel. The same build with a lower roof line that sits closer to the cab. The lower height helps with carports and car park height limits, at the cost of some internal space.
Heavy duty aluminium. The lightest of the three. On an older ute with tired springs, or one that tows near its limit, saving weight over the axle helps ride height and handling.
Browse steel canopies for the Navara or aluminium Navara canopies, or compare every option on the Navara canopy page.
Before ordering, check the tub is straight and the rails are free of rust and cracks. A canopy clamps or bolts to the tub sides, so damage there should be repaired first.
Towing With a D40
The D40 towbar suits utes built from 10/2005 to 06/2015 and fits either a tub with the factory step bumper or a tray back. That makes it a good fit for D40s that have been converted to a tray for work. Shop the D40 towbar.
Pair it with the plug and play wiring loom, which comes with an ECU module and plugs into the factory connectors for the same 10/2005 to 06/2015 build range. The module protects the ute's own lighting circuits from the trailer's load, and there is no cutting into the factory loom. Find it under Navara trailer wiring.
If you tow anything over 2,000 kg, the trailer needs brakes operated from the driver's seat, which on most caravans and car trailers means electric brakes and a brake controller.
Before a long tow, compare three ratings: the towbar's own rating, the tow ball's rating and the figure on the ute's plate. The lowest of the three is your limit. Aim for a towball download of around ten per cent of the trailer's weight, and test every trailer light with the loom connected before you leave.
Moving On From a D40
If you plan to replace the D40 within a few years, keep that in mind before buying a canopy. D40 canopies do not fit the D23 or D27, so the canopy stays with the ute when it is sold. Owners stepping up can see the D23 NP300 range, and anyone running an even older Navara can try the D22 hub. The Navara model hub covers every generation.
We fit D40 canopies and towbars at our South Windsor showroom and deliver Australia wide.
Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.
Have questions?
Will a D23 canopy fit my D40?
Is steel or aluminium better on an older D40?
My D40 has a tray. Can I still fit your towbar?
Why does the D40 wiring loom include an ECU module?
How much can a D40 tow?
Do you have roller shutters or bull bars for the D40?
Need help choosing?
Call us on 02 9627 8666 or chat with our team.






