Mazda BT-50 Trailer Wiring Harnesses

Plug and play towbar wiring looms with ECU modules for each BT-50 generation, so your trailer's lights and indicators work without cutting into the ute's factory wiring.

Showing products for your

Showing 2 of 2 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Picking the Right Loom

Choose by build date. A BT-50 from 2011 to 08/2020 takes the loom shared with the PX, PX2 and PX3 Ranger. The TF from 08/2020 takes the loom shared with its platform twin, the Isuzu D-MAX. Each kit supplies a seven pin flat trailer plug.

What the ECU Module Does

Late model utes run their lighting through body electronics, and splicing into that system can bring up warnings or faults. The module in each kit keeps the trailer's lighting load separate from the vehicle's control module. The TF loom plugs into a factory connector on the left hand chassis rail with no dealer coding.

Sensors and Towing Limits

The TF loom has an automatic reverse sensor cut off, while the earlier loom does not connect to reversing systems. The 3.0 litre TF and the 3.2 litre UP and UR are rated to tow up to 3,500 kg braked, and the 1.9 litre XS up to 3,000 kg. A trailer with electric brakes also needs a brake controller. See towbars and towing for hitches.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Is the TF loom the same one used on the D-MAX?

Yes. The listing covers the BT-50 and the Isuzu D-MAX from 08/2020, because the two share a platform.

My UR has rear parking sensors. Will the older loom mute them?

No. That loom does not connect to reversing systems, so it will not switch them off when towing.

My caravan has a 12 pin plug. Will this work?

The looms come with a seven pin flat plug, so a 12 pin van needs an adaptor or a different socket.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.