Jeep Gladiator Towbars

Towbars and wiring harnesses for the Jeep Gladiator. Our range covers the JT Gladiator (2020+) with receiver hitch options rated for the Gladiator's 2,721 kg braked towing capacity. Complete wiring kits with CAN bus integration available.

Showing products for your

Showing 1 of 1 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Jeep Gladiator Towbar Range

The Jeep Gladiator brings genuine Wrangler based off road capability to the towing conversation. With a braked towing capacity of 2,721 kg (Rubicon), the Gladiator handles boats, jet skis, single axle camper trailers and general purpose trailers. While it falls short of the 3,500 kg segment benchmark, the Gladiator's towing capacity is sufficient for the recreational and lifestyle towing that most Gladiator owners pursue.


At Oz Canopies & 4x4, we carry towbars designed for the Gladiator's unique chassis and body on frame architecture.

Gladiator Towing Considerations

The Gladiator's 2,721 kg braked towing capacity is lower than mainstream dual cab utes. This reflects the vehicle's off road focused design, body on frame construction and shorter wheelbase. For owners who bought the Gladiator for its off road capability and lifestyle appeal, the towing capacity comfortably covers recreational loads.


Where the Gladiator differs from conventional utes is its solid front and rear axles and disconnectable stabiliser bars. These features are excellent off road but can affect towing stability on road at higher speeds. Quality weight distribution hitches and proper trailer loading (with weight forward of the trailer axle) are particularly important on the Gladiator.

Towbar Types for Jeep Gladiator

The Gladiator's Class IV receiver hitch (either factory or aftermarket) is the standard towing connection point. A 50 mm (2 inch) receiver is standard. Wiring harnesses must be Gladiator specific to integrate with the vehicle's CAN bus electronics. We stock harnesses with 7 pin flat and 12 pin round connector options.

Towing Tips for Gladiator Owners

The Gladiator's solid axle suspension and higher centre of gravity mean towing dynamics differ from conventional utes. A few tips for Gladiator owners who tow:


Trailer loading is critical. Keep approximately 60% of the trailer's weight forward of the trailer axle to maintain stability. The Gladiator's shorter wheelbase is more sensitive to incorrect trailer loading than longer wheelbase vehicles.


A quality weight distribution hitch is recommended for loads above 1,500 kg. This improves steering response and reduces the rear sag that can affect headlight aim.


If your Gladiator has had a lift kit installed, be aware that the higher ride height changes the tow ball height. This can create an angle between the vehicle and trailer that affects weight distribution. An adjustable tow ball mount allows you to match the correct hitch height.

Fitment and Delivery Information

Vehicle Compatibility

Gladiator towbars are specific to the JT platform (2020+). Do not use Wrangler towbar components on the Gladiator as the chassis differs. Our team can verify fitment.

Professional Fitment Available

We offer Gladiator towbar and wiring installation at our Sydney showroom. Call 02 9627 8666 or text 0440 130 098 for details.

Delivery Australia Wide

Gladiator towbars and wiring kits ship Australia wide. Contact us for delivery estimates.

Choosing the Right Towbar for Your Gladiator

For most Gladiator owners, a quality 50 mm receiver hitch towbar that integrates cleanly with the vehicle's rear profile is the best choice. The receiver allows you to swap between a tow ball for trailer towing and a recovery hitch for off road use. Given the Gladiator's recreational focus, many owners value the ability to remove the tongue when heading to the beach, camping ground or trail without the bulk of a fixed towbar.

Have questions?

What is the Jeep Gladiator towing capacity?

The Gladiator Rubicon has a 2,721 kg braked towing capacity. Other variants may differ. Check your compliance plate.

Does a Wrangler towbar fit the Gladiator?

No. The Gladiator and Wrangler have different chassis despite sharing the same body on frame platform. Towbars are not interchangeable.

Can I tow a caravan with the Gladiator?

Yes, within the 2,721 kg limit. The Gladiator suits smaller caravans and camper trailers. Use a weight distribution hitch for stability.

Does the Gladiator come with a factory towbar?

Some Gladiator models include a factory receiver hitch. Aftermarket towbars are available for models without one.

Can you install a towbar on my Gladiator?

Yes. Professional installation is available at our showroom, 20 Walker Street, South Windsor NSW 2756. Call 02 9627 8666 for details.

What connector do I need for my Gladiator?

7 pin flat for light trailers. 12 pin round for trailers with electric brakes and auxiliary power. Most Gladiator owners tow recreational loads that a 7 pin flat connector covers.

Do I need a weight distribution hitch for the Gladiator?

Yes, recommended for loads above 1,500 kg. The Gladiator's shorter wheelbase and higher centre of gravity make proper weight distribution particularly important for stable towing.

Do you deliver Gladiator towbars Australia wide?

Yes. Gladiator towbars and wiring kits ship across all Australian states and territories. Contact us for a delivery quote.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.