Collection: Ford Ranger Fender Flares

Fender flares for the RA Next Gen Ford Ranger dual cab from August 2022, covering matte black aftermarket sets in smooth or bolt on style and Genuine EGR flares in bolt on or colour coded finish.

Showing products for your

Showing 4 of 4 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Made for the RA Body Only

Ford's Next Gen Ranger reached Australian buyers in mid 2022 with an all new body, and every flare on this page is cut for that RA dual cab shape, with fitment listed from 2022 or 08/2022 onwards. The guard curves, bumper corners and rear quarters were redesigned from the PX series, so a set made for a PX2 or PX3 will not sit flush on a Next Gen, and a Next Gen set will not suit the older ute either. If you still drive a PX2 or PX3 Ranger, give us a call and we can talk through flares for the earlier body.

Grades, Wheels and the Wildtrak Question

The aftermarket smooth and bolt on sets, along with the EGR bolt on set, are listed for XL, XLS, XLT and Sport dual cabs fitted with the rear step. Those are the grades that most often get a wheel and tyre upgrade. Ford sends the XL out on 16 inch steel wheels and the XLS on 16 inch alloys, the XLT steps up to 17s and the Sport to 18s, so plenty of owners move to a wider aftermarket wheel with chunkier all terrains and then find the tread sitting proud of the factory guard.

The Wildtrak is the grade to be careful with. The aftermarket listings say outright that they will not suit it, and the EGR bolt on listing only names the four grades above. The colour coded EGR set is described as suiting RA dual cabs generally, so if you drive a Wildtrak or Platinum, confirm your grade with us before you order. Raptor and Tremor owners should also call first. The Raptor leaves the factory on 285/70R17 all terrains, and the MY26.5 Ranger Tremor comes with large wheel arch mouldings and a 30 mm wider track.

Aftermarket ABS Versus Genuine EGR

The aftermarket sets are moulded from UV stabilised matte black ABS and come as six pieces with a full fitting kit. They attach at the Ranger's existing mounting points using genuine 3M tape, so there is no drilling, and an adhesion primer is recommended for the strongest bond. They are the lower outlay option and suit owners who want the wider look without paying for paint.

The Genuine EGR flares are CAD designed and manufactured in Australia, vacuum formed from UV stable ABS, robotically trimmed and finished to OEM standards. Each guard gains 35 mm of extra width, the kit is six pieces, installation needs no drilling and EGR lists them as compatible with sensors. If you want the closest thing to a factory option, this is the route.

Bolt Heads or a Clean Edge

Smooth flares follow the Ranger's guard line without any hardware showing. They suit an XLT or Sport that spends most of its week on bitumen and wears its factory wheels or a modest upgrade. The bolt on look adds a row of exposed bolt heads around the arch for a tougher, off road appearance that sits well beside a steel bull bar, rock sliders and a lift. On the aftermarket bolt on set those bolts are cosmetic, because the tape does the holding, so choose on looks rather than strength.

Body Colour or Contrast Black

Colour coded EGR flares are painted to match the Ranger, so the extra width reads as part of the body rather than an add on. They are a popular finish on lighter coloured XLTs and Sports where black arches would stand out. Matte black works the other way, giving a deliberate contrast that ties in with black wheels, a black sports bar or a dark grille, and it hides scrub marks from bush tracks better than gloss paint. Have your paint colour ready when you order colour coded flares.

Preparing the Guards for Tape

Because the aftermarket sets rely on tape rather than fasteners, preparation decides how well they last. Wash the Ranger's guards, strip any wax or polish with a panel wipe, and fit the flares on a mild, dry day rather than in a cold garage, since adhesive tape grabs best on warm, clean paint. Apply the primer where the tape will sit, press each piece firmly along its length, and leave the bond to cure before a pressure wash or a muddy weekend. If you would rather hand the job over, ask about fitting at our South Windsor showroom, available to NSW customers.

Bull Bars, Sensors and Tyre Rules

The listings describe these six piece sets as suited to Rangers fitted with a steel or alloy bull bar, which matters if you already run a bar or plan to add one. If your Ranger has front parking sensors, EGR's sets are listed as sensor compatible; the aftermarket listings do not mention sensors, so tell us about them when you order. Flares cover tread that sits outside the guard, but they do not make every wheel and tyre combination road legal, so check the rules for NSW or your state before choosing a size. Browse the wider Ranger accessories collection to plan the rest of the build.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

I have a 2021 PX3 Ranger. Will any of these flares fit?

No. They are all cut for the RA Next Gen body from 2022, which was redesigned at the guards and bumper. Call us to talk about options for the earlier Ranger.

Can I put the aftermarket smooth or bolt on set on my Wildtrak?

No. Both listings state they will not suit Wildtrak models. The EGR colour coded set is listed for RA dual cabs, so check your exact grade with us first.

How much wider will EGR flares make my Ranger?

EGR quotes 35 mm added to each guard, from a six piece kit that installs without drilling.

Are the bolts on the aftermarket bolt on set holding it in place?

No. They are there for the look. The flares bond to existing attachment points with 3M tape, and a primer gives the best adhesion.

My XLT has front parking sensors. Which flares should I choose?

Start with the EGR sets, which are listed as compatible with sensors. The aftermarket listings say nothing either way, so mention your sensors before ordering.

I am swapping my XL's 16 inch steel wheels for 17s with wider all terrains. Do I need flares?

Only if the tread ends up outside the guard. Measure once the new wheels are on, then pick a flare deep enough to cover the overhang.

Will these flares work with a bull bar?

Yes. The six piece sets are described as suited to Rangers running a bull bar.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.