Collection: Steel Canopies

Heavy duty steel ute canopies in black powder coat, made for each generation of the Navara, HiLux, D-MAX, Triton, Ranger and BT-50, plus newer utes like the Shark 6 and Tasman. Standard and low profile versions, lift up doors on three sides and keyed alike locks.

Showing products for your

Showing 24 of 50 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Why Owners Pick Steel

Steel is the material for owners who treat the canopy as a tool rather than a styling piece. Every canopy in this category is a heavy duty steel shell finished in black powder coat, built to take ladders sliding in, toolboxes dragged out and the general knocks of a working life. Aluminium is chosen to save weight. Steel is chosen for stiffness, dent resistance and value, and for many trade and fleet buyers that is the better bargain.

This page sticks to steel: how the canopies are built, which versions exist, how fitment runs from the Navara D22 to the newest utes, and what to plan around one. To weigh steel against the other materials, start with our overview of every type of ute canopy.

How Our Steel Canopies Are Built

The design is consistent across the range, which makes one ute easy to compare with another. Listings such as the earlier Amarok and the Jeep Gladiator spell out the same core build:

  • Lift up doors on all three sides. Both side doors and the rear door hinge upward, so the full length of the tub is reachable from the kerb or the tailgate.
  • Front and rear glass. The front window lines up with the cab's back window, so you keep a view through the rear of the ute.
  • Six push locks, keyed alike. Two per door, all on one key.
  • Integrated tie down rail inside for strapping loads.
  • Brake light at the rear and an interior light for working after dark.

With steel side doors and glass only at the front and rear as standard, nothing inside is on show to someone walking past, which matters when tools stay in the ute overnight.

Roof strength is where steel earns its keep. On those listings the canopy roof is rated to 200 kg dynamic, the figure for driving, and 300 kg static, the figure for when the ute is parked. Ratings can differ between models, so read the number on the listing for your ute before planning a roof load.

Standard Height or Low Profile

Many utes have two steel canopies to choose from: the standard heavy duty canopy and a low profile one. The low profile version gives up some internal height in exchange for a lower roof line. It suits owners who mostly carry toolboxes, cases and bags rather than tall gear, and those who prefer a flatter look over the cab. The standard height leaves more room to stand items upright or run taller shelving.

Low profile versions are listed for the Navara D40 and D27, Triton MV, Ranger PX to 08/2022, Colorado RG, BT-50 from 2011 to 08/2020 and from 08/2020, the D-MAX TF and current D-MAX, and the LDV T60.

Fitment From the D22 to the Shark 6

A steel canopy is made for one tub, so we list each one by generation and, where it matters, by trim or tub length. The range reaches back further than most:

  • Nissan Navara: D22 short tub and long tub, D40, NP300 D23 to 01/2021, the D23 facelift to 03/2026, and the new D27
  • Toyota HiLux: N60 from 1997, N70 Vigo, N80 in separate SR Workmate and SR5 versions, and the Next Gen N90 from 12/2025
  • Ford Ranger: PJ and PK, PX to PX3 including Raptor, and the RA Next Gen and Raptor
  • Isuzu D-MAX: 2008 to 2012 (shared with the Holden Rodeo and Colorado RA7 and RC), TF from 2012 to 08/2020, and 08/2020 on
  • Mitsubishi Triton: MN, MQ and MR, and MV
  • LDV T60: standard tub and Mega Tub
  • KGM Musso: short tub and XLV long tub

Newer and less common utes are covered as well, including the BYD Shark 6, Kia Tasman, MG U9, LDV Terron 9, JAC T9, GWM Cannon and Cannon Alpha, the first Foton Tunland and the new V7 and V9, Mercedes X-Class, Jeep Gladiator, Holden Colorado RG and both Amarok generations.

Long tub utes such as the T60 Mega Tub, Musso XLV and D22 long tub each take their own canopy, so confirm tub length as well as model. Vehicle pages filter the range for you: Navara steel canopies, HiLux steel canopies, steel canopies for the D-MAX, Triton steel canopies, steel canopies for the Ranger, BT-50 steel canopies and T60 steel canopies.

Weight and Payload

Steel's strength comes with mass. Taking an example from our own listings, the steel canopy for the earlier Amarok weighs 100 kg, against 65 kg for the aluminium canopy made for the same ute. That 35 kg comes off payload alongside shelving, tools, roof gear and passengers. On a trade ute with a moderate load it rarely matters. On a ute that tows, carries a full drawer fitout or already runs close to its GVM, do the sums before you commit, and compare lighter aluminium canopies if the margin is tight.

Setting Up the Inside

Steel walls give solid anchor points for a working fitout. We stock steel storage units made for our steel canopies, in driver side and passenger side versions, each with two removable and adjustable shelves. They are made from heavy duty galvanised steel plate with a black textured powder coat, and suit all of our steel canopies except the Triton MQ and MR, short tub Musso, Kia Tasman and Jeep Gladiator. Mount them along the walls and the floor stays clear for toolboxes or a drawer system.

Upgrades to Plan Up Front

A few extras are easier to decide on before the canopy goes on:

  • Central locking. A kit made for Oz Canopies steel canopies links all six locks to the ute's remote.
  • Pet friendly sliding windows. Driver side and passenger side sliding windows can be added for airflow when a dog rides in the back.
  • J Brace. Ford calls for a J Brace tub reinforcement kit when a canopy goes on the RA Ranger or Raptor, to keep the factory warranty intact, and VW asks the same for the NF Amarok.
  • Jack off legs. These let you lift the canopy off and park it on its own legs when the job needs an open tub.

You will find all of these in canopy parts and add ons. If a colour matched finish matters more to you than toughness, compare our fibreglass canopies.

Keeping Rust Away

A powder coated steel canopy only rusts where the coating has been broken, so looking after it means protecting that finish. Touch up chips and deep scratches as soon as you spot them, especially along door edges and around the tie down rail where tools strike. Hose off salt after beach runs and road grime after wet weather. Put a drop of lubricant on the push locks and hinges every few months, and go over the mounting clamps with a spanner after the first few hundred kilometres and again at each service.

Fitting, Collection and Freight

Steel canopies arrive flat packed and are assembled before fitting, which is one reason most owners have us do the job. For NSW customers, our fitters assemble, mount and connect the canopy at South Windsor, and the fitting quote asks about anything that could get in the way, such as a tonneau cover, sports bar or over rail liner. If you plan to collect, bring a trailer or a tray back ute, because a canopy cannot travel on the tub it is made for. Freight is quoted for addresses anywhere in Australia. We have been fitting canopies in Sydney since 1998.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

How much weight can a steel canopy roof carry?

Listings such as the earlier Amarok and the Jeep Gladiator rate the roof at 200 kg dynamic and 300 kg static. Check the listing for your ute, and always work to the lowest rating of the canopy, the rack and its mounts.

What is the difference between the standard and low profile steel canopy?

The low profile canopy has a lower roof line and less internal height. Choose it for toolboxes and bags and a flatter look, or the standard height if you need to stand gear upright or fit tall shelving.

How much heavier is a steel canopy than an aluminium one?

It depends on the ute. On the earlier Amarok, our steel canopy weighs 100 kg and the aluminium one 65 kg, so expect steel to take a noticeably bigger share of your payload.

Do steel canopies come with central locking?

As standard they use six push locks keyed alike, two on each door. A central locking kit made for our steel canopies can be added so the canopy unlocks with the ute.

Can I get a steel canopy in my ute's colour?

Our steel canopies are listed in black powder coat, which hides wear and suits most paint colours. For a canopy painted to match the ute, look at fibreglass or EGR canopies instead.

Do you have steel canopies for long tub utes?

Yes. The LDV T60 Mega Tub, KGM Musso XLV and Navara D22 long tub each have a dedicated steel canopy, separate from the standard tub versions.

Does a Next Gen Ranger need anything extra for a steel canopy?

Yes. Ford requires a J Brace tub reinforcement kit with a canopy on the RA Ranger and Raptor to keep the factory warranty. NSW customers can have it fitted along with the canopy.

Can I fit a steel canopy myself?

It is possible, but the canopy arrives flat packed and needs assembling, mounting and connecting, and it takes several people to lift. Most NSW owners have our fitters do it.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.