Protection and Accessories

Bull bars, nudge bars, side steps, rear bars, fender flares, weather shields and bonnet protectors for Australian utes and 4WDs. Protect your vehicle from front to back with ADR approved and sensor compatible options from brands including Ozbar, ROCKARMOR, Hamer and EGR.

Showing products for your

Showing 144 of 234 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Protect Your Ute From Front to Back

Australian roads are hard on vehicles. Kangaroos at dusk, flying stones on gravel, scrub along fire trails and car park bumps all leave their mark. This range brings together the parts that take those hits instead of your panels, grouped by where they sit on the vehicle, so you can plan protection as a complete setup rather than one part at a time.

Front Protection

The front of the vehicle takes the most punishment, and it is where most buyers start.

  • Bull bars give full width protection across the front for animal strikes and off road knocks, and provide mounting points for driving lights, a UHF aerial and a winch. Our range includes Ozbar, ROCKARMOR GT, Hamer and Rival bars. See bull bars.
  • Nudge bars are a smaller centre bar for lights and an aerial, with light protection for the grille. They suit city and highway driving where a full bull bar is more than you need. Some come with a bash plate. See nudge bars.
  • Underbody protection such as single piece bash plates guards the sump and steering components under the front. These are made to match specific bull bars and must be bought with the matching bar, as they are not universal kits. See underbody protection.
  • Bonnet protectors shield the front edge of the bonnet from stone chips and bugs on long highway runs. See bonnet protectors.

Sensors, Airbags and ADR Compliance

Late model utes carry parking sensors, radar for adaptive cruise and cameras for autonomous emergency braking behind the front bumper. Fit the wrong bar and those systems can stop working or throw faults. Look for bars listed as sensor compatible for your exact model, and choose ADR approved bull bars designed for that model, so the airbag and safety systems keep working as the manufacturer intended. Front protection must also comply with the rules in your state, with Transport for NSW and other state authorities applying the national vehicle standards.

Side Protection and Access

Side steps make it easier to climb into the cab, reach the roof rack and load the tub, and they take scrapes that would otherwise hit the sills and doors. Choose heavy duty aluminium steps for lower weight, or Stingray super heavy duty steel steps for tougher off road use. See side steps.

Door cladding and other body protection in body styling accessories helps guard the doors against car park dings and scrub scratches, along with bonnet scoops and EGR protection packs for a finished look.

Rear Protection

The rear of a ute takes knocks from reversing, loading and off road departure angles. Our rear bars include the Hamer Rear Nova for the Next Gen Ranger, which is sensor compatible and ADR approved, and heavy duty Oz4x4 rear step bumper replacements for the Ranger PX and earlier BT-50. A rear bar adds a strong step for reaching the tub and better protection for the tail lights. See rear bars.

Wheel Arches and Windows

Fender flares protect paintwork around the wheel arches from stones and mud thrown up by the tyres, and help cover wider wheel and tyre packages. Options include genuine EGR flares in colour coded and smooth matte black finishes, plus bolt on styles. See fender flares.

Weather shields, also called window visors, let you keep the windows cracked open in the rain and take the edge off wind buffeting. See weather shields.

Matching Protection to Your Exact Model

Protection gear is made for a specific model and generation, and sometimes a specific body. A bar for the PX2 or PX3 Ranger will not fit the RA Next Gen, and HiLux bars differ between the standard N80 and the widebody GR and Rogue. Facelifts can change bumpers, sensor positions and mounting points too. Before ordering, confirm your build year, variant and whether the vehicle already has a factory nudge bar, side steps or flares that will come off.

Where to Start

Your priorities depend on where the vehicle goes.

  • Touring and regional driving: bull bar first for animal strikes, then underbody protection, side steps and a bonnet protector for long gravel runs
  • Work utes: nudge bar or bull bar for light and aerial mounting, side steps for constant cab and tub access, and weather shields for the daily drive
  • City and highway: nudge bar, bonnet protector, weather shields and fender flares to protect paint and keep the vehicle looking sharp

If you are building out the rest of the ute, pair front and side protection with a ute canopy or roller shutter for the back.

Fitting

Bull bars, rear bars and anything that affects sensors or airbags should be professionally fitted. Our team fits protection gear at the South Windsor showroom, and we deliver across NSW and the rest of Australia.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Should I get a bull bar or a nudge bar?

A bull bar gives full width protection for animal strikes and off road use and can carry a winch. A nudge bar is smaller and lighter, suiting city and highway driving where you mainly want lights and an aerial.

Will a bull bar affect my parking sensors or safety systems?

It can if the bar is not designed for your vehicle. Choose a bar listed as sensor compatible for your exact model and generation.

Are your bull bars ADR approved?

Many of our bull bars are listed as ADR approved. Check the listing for your vehicle, and ask our team if you are unsure.

Do bash plates fit any bull bar?

No. Our single piece bash plates are made to match specific bull bars and must be purchased with the matching bar.

Aluminium or steel side steps?

Aluminium is lighter and won't rust. Steel is tougher for heavy off road use where the steps may hit rocks.

What do fender flares do?

They protect the paint around the wheel arches from stones and mud, and help cover wider wheels and tyres.

Can you fit a bull bar for me?

Yes. Our team fits bull bars and other protection gear at our South Windsor showroom in Sydney.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.