Collection: Ford Ranger PX Accessories

Accessories for the PX Ford Ranger sold from late 2011 to July 2022, covering the PX1, the 2015 PX2 facelift, the PX3 and the PX Raptor, with notes on where front and rear fitments split inside that long production run.

Showing products for your

Showing 72 of 133 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Three Updates Under One Code

The PX went on sale in Australia in October 2011 with a 2.2 litre four cylinder diesel, a 3.2 litre five cylinder diesel and, on some 4x2 models, a 2.5 litre petrol. The PX2 followed in 2015 with a redesigned front end, electric power steering and Ford's SYNC2 system. The PX3 landed in 2018 as the MY19 model, adding a 2.0 litre twin turbo diesel and 10 speed automatic alongside the older engines, and the Raptor used that twin turbo engine too. Single cab, extended cab and dual cab bodies were all offered, so a PX in our workshop can be anything from a high kilometre tray back to a late Wildtrak.

Where Fitment Splits Inside the PX Years

Rear gear is the easy part. Most canopies, roller shutters, tub liners and tub slides are listed across 2011 to 07/2022, treating the tub as one fitment through all three updates.

The front is where dates matter. Most PX bull bars in our range are built for the 2015 face and list PX2 and PX3, and the premium bonnet protector and matte black bonnet scoop follow the same line. If your Ranger was built before the 2015 facelift, call us before ordering anything that bolts to the front.

A few smaller splits catch owners out. The HSP tail assist kit, EGR's Load Shield hard lid and the Oz4X4 rear step bumper are listed from 2012, so a very early build should be checked. The soft tonneau range for the Ranger also splits by cab and by what sits behind it: a dual cab or extra cab with the XLT sports bar, no bar at all, or a cabin guard.

Raptor PX: Shared Tub, Different Face

PX Raptor fitments in our range start at 2018. Its tub takes many of the same parts as the dual cab Ranger: EGR canopies, steel and aluminium canopies, EGR Rolltrac shutters, HSP's load slide and the dust defence kit all name it. The front does not carry over. PIAK makes Elite loop and non loop bars for the Raptor PX MKIII, and there is a dedicated Raptor sensor compatible bull bar, a matte black Raptor nudge bar and a Raptor version of the Load Shield hard lid. Ford rated the PX Raptor to tow 2,500 kg and carry about 750 kg, well short of the standard ute, so heavy steel parts eat into its margin quickly. Filter the Ranger bull bar collection by year to see what suits yours.

Match the Cover to What Sits Behind the Cab

PX Rangers left the factory with different setups behind the cab, so covers are listed to suit each. HSP's Roll R Cover Series 3.5 has PX versions for no sports bar, the XLT sports bar, the OE extended sports bar and HSP's Armour bar, plus Space Cab versions. EGR's Rolltrac comes in electric and manual form across the PX, PX2, PX3 and Raptor, and Oztrax builds an electric shutter whose listing also names the FX4. Start with the electric roller shutters for the Ranger, then add HSP's load bar if you want to carry gear over a Roll R Cover.

Canopies for Dual Cab and Super Cab PX

Dual cab owners can pick lift up panels for tool access or sliding side windows, each with central locking, or step up to EGR's GEN 3 and Premium canopies. Super cab owners have their own canopy too. Steel canopies come in standard and low profile heavy duty versions, and the heavy duty aluminium canopy is the lighter option for touring. Our EGR canopies for the Ranger cover PX dual cabs from 2011. Outside the tub, aluminium and Stingray steel side steps and premium weather shields are both listed for 2011 to 07/2022, so they suit every PX regardless of update.

Towing With a PX

Early PX 4x4s were rated to tow 3,350 kg, later raised to 3,500 kg, so check the compliance plate on an older ute before hitching a big van. Towbars are listed by body: tub body with step, tray back and tray back with an extended tray, plus TAG's Extreme Recovery bar for tray backs. Wiring for these utes is a plug and play harness with an ECU module. All of it sits in the Ranger towbars and towing range.

Parts Shared With the BT-50

Several PX parts are also listed for the Mazda BT-50 of 2011 to 2020, including Prorack roof racks, the TAG tray back towbar, the ECU module harness and the EVC iDrive throttle controller. Treat a part as shared only when its listing names both utes. For the wider nameplate, go back to all Ford Ranger accessories, or across to the RA Next Gen range if you are upgrading.

Bring your PX to South Windsor for fitting, or order for delivery anywhere in Australia.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

My Ranger was built in 2014. Do PX2 and PX3 parts fit?

Rear parts usually do, since most tub covers and canopies span 2011 to 07/2022. Front parts mostly do not, because the bull bars and bonnet protector follow the 2015 facelift. Give us your build date and we will sort which is which.

Does a canopy for the PX Ranger fit my PX Raptor?

Many do. The dual cab canopies with lift up panels or sliding windows, EGR's GEN 3 and Premium canopies, and the steel and aluminium canopies all name the Raptor. Check the listing before ordering.

I have a cabin guard, not a sports bar. Which soft tonneau do I need?

EGR makes one for dual cabs built 2011 to 05/2013 and another for 06/2013 to 07/2022, plus an extra cab version from 06/2013. Your build plate tells us which.

Can I use a part listed for the Mazda BT-50?

Only if the listing names the PX Ranger as well, such as the Prorack roof racks or the TAG tray back towbar. Otherwise treat BT-50 parts as a separate fitment.

How much can my PX tow?

Later PX Rangers are rated at 3,500 kg braked, early 4x4s at 3,350 kg and the Raptor at 2,500 kg. The figure on your compliance plate is the one that counts.

I run a PX tray back. What can I fit?

Towbars for a standard tray back and an extended tray, TAG's Extreme Recovery bar, and cab roof gear such as Prorack bars and roof platforms. The tub covers and canopies are for tub bodied utes.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.