Collection: Aluminium Canopies

Heavy duty aluminium ute canopies made to fit specific utes, from the latest Ranger, HiLux, Triton and D-MAX back to the Navara D22 and HiLux Vigo, plus flat plate aluminium canopies for tray backs. Lighter than steel, rust free and ready for roof racks, drawers and touring fitouts, with expert fitting in NSW and delivery Australia wide.

Showing products for your

Showing 24 of 50 results

Gear up for adventure
Gear up for adventure
Limited time sale

Gear up for adventure

Save big on canopies, racks, drawers & morethis season

Aluminium Ute Canopies for Work and Touring

An aluminium canopy turns an open tub or tray into lockable, weatherproof storage without weighing the ute down the way steel can. That is the whole case for aluminium. You get a strong, rigid shell that won't rust, and you keep more of your payload for tools, camping gear, water and passengers.

Our aluminium range is built around the heavy duty black canopy, made for specific utes and generations, alongside universal flat plate canopies for trays. If you are still weighing up materials, our main ute canopies range puts aluminium, steel and fibreglass side by side.

Tub Canopies vs Tray Canopies

The first question is what sits on the back of your ute.

Tub Canopies

A tub canopy (often called a styleside canopy) clamps onto the rails of the factory tub. Every ute's tub is shaped differently, so tub canopies are made for one make, model and generation. The canopy follows the tub's rail line and tailgate opening so it seals properly and lines up with the cab.

Tray Canopies

If your ute is a cab chassis with an aftermarket tray, the canopy sits on the flat tray deck instead. Our flat plate aluminium canopies come in 1800, 2100 and 2400 mm lengths, 1775 mm wide and 850 mm high, in black or white. Measure your tray deck before ordering, and allow for the headboard and any side rails. The single cab gullwing canopy at 2400 x 1775 x 850 mm suits longer trays and works like a giant lockable toolbox, with doors that lift on both sides so you can reach your gear from either side of the vehicle.

Made for Your Ute, Including Older Generations

Plenty of canopy ranges stop at the current model. Ours goes further back, which matters if you are running an older work ute with years left in it.

Current Models

Heavy duty aluminium canopies are available for the Ford Ranger RA Next Gen and Raptor (with an extra cab option), Toyota HiLux N80 and the new N90, Mitsubishi Triton MV, Isuzu D-MAX, Mazda BT-50, Nissan Navara D23 and the new D27, VW Amarok NF, GWM Cannon and Cannon Alpha, Kia Tasman, BYD Shark 6, LDV T60 and T60 Mega Tub, LDV Terron 9, MG U9, JAC T9, Foton Tunland V7 and V9, and the KGM Musso in short and long tub.

Earlier Generations

We also stock aluminium canopies for the Navara D22 (long and short tub) and D40, HiLux Vigo, Triton MN and MQ/MR, Ranger PX, PX2 and PX3, the D-MAX from 2008 with the matching Holden Rodeo and Colorado RA7/RC, the Colorado RG, the previous Amarok and BT-50, and the first Foton Tunland.

American Pickups

Full size pickups quote tub lengths in feet, and the canopy has to match. We carry aluminium canopies for the Chevrolet Silverado 1500 (5'8" tub), RAM 1500 (5'7" tub), Ford F-150 (5'5" tub), Toyota Tundra (5'5" tub) and Jeep Gladiator.

Long tub variants such as the T60 Mega Tub, Musso XLV and D22 long tub have their own canopies, so check your tub length as well as your model.

What Heavy Duty Means Here

A heavy duty aluminium canopy is built as a work tool first. Expect a rigid aluminium frame, side doors that open high for easy access to drawers and shelving, lockable doors, and a black powder coated finish that copes with sun, salt air and the odd scrape on a jobsite. Black also hides wear better than bare alloy and suits both dark and light coloured utes.

Weight, Payload and GVM

Every kilogram the canopy weighs comes off your payload. Payload is the gap between your ute's kerb weight and its GVM (gross vehicle mass), and it has to cover the canopy, roof racks, drawers, fridge, water, tools and everyone in the cab. Aluminium leaves far more of that margin free than steel, which is why it is the usual pick for touring builds and for utes that tow while loaded.

If your ute is close to its GVM once the build is finished, talk to us before you buy. A lighter canopy is often the simplest way to stay legal without paying for a GVM upgrade.

Fitting Out the Inside

Flat aluminium walls and doors make a fitout straightforward. Common setups include drawer systems on the tub floor, shelving behind the side doors, a fridge slide at the rear, LED lighting and 12V outlets. Plan the fitout before the canopy goes on, because drawer height decides how much usable space is left above. One exception: storage units, kitchen units and tradesman racks do not fit our Kia Tasman canopies.

Roof Racks, Platforms and Rooftop Tents

Aluminium canopies are often fitted with cross bars or a flat roof platform for ladders, recovery gear, awnings or a rooftop tent. Each canopy has its own roof rating, and manufacturers usually quote a lower dynamic figure for driving and a higher static figure for when the ute is parked, such as people sleeping in a tent. Always work to the lowest rating in the chain, whether that is the canopy, the rack or the mounts. Matching gear is in roof racks and platforms.

Aluminium, Steel or Fibreglass

Pick aluminium if weight and corrosion resistance come first, for touring, coastal use or utes that already carry a heavy load. Pick steel canopies if you want the toughest shell for daily trade use and weight is less of a concern. Pick fibreglass canopies if you want a smooth, colour matched shell that looks factory fitted.

Fitting and Delivery

Our team fits aluminium canopies at the South Windsor showroom, and we deliver across NSW and the rest of Australia. Next Gen Ranger installs need a J Brace, which you will find in canopy parts and accessories.

Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.

Have questions?

Will an aluminium canopy fit any ute?

No. Tub canopies are made for a specific model and generation because tub shapes, rail lines and tailgates differ. Flat plate canopies are the exception, as they sit on a tray deck and are chosen by tray size.

What is a flat plate aluminium canopy?

It is a canopy made to sit on a flat tray rather than in a tub. Ours come in 1800, 2100 and 2400 mm lengths at 1775 mm wide, to suit dual cab and single cab trays.

Do you have aluminium canopies for older utes?

Yes. We stock canopies for older models including the Navara D22 and D40, HiLux Vigo, Triton MN, Ranger PX, Colorado RG and the earlier D-MAX and Rodeo.

Is aluminium better than steel for a canopy?

It depends on the job. Aluminium is lighter and won't rust, so it suits touring and heavily loaded utes. Steel handles hard daily knocks better and usually costs less.

Can I mount a rooftop tent on an aluminium canopy?

Often yes, with the right rack or platform. Check the canopy's static rating for sleeping and its dynamic rating for driving, and never exceed the lowest rating in the setup.

Do you have aluminium canopies for long tub utes?

Yes. The LDV T60 Mega Tub, KGM Musso XLV and Navara D22 long tub each have their own aluminium canopy.

What colours do your aluminium canopies come in?

The vehicle specific heavy duty canopies come in black. Flat plate tray canopies are available in black or white, depending on size.

Can you fit the canopy for me?

Yes. Our team fits canopies at our South Windsor showroom in Sydney, and we deliver Australia wide if you are fitting it yourself.

Need help choosing?

Call us on 02 9627 8666 or chat with our team.