Ford Ranger Tyres: What to Buy for Road, Sand, Mud and Touring

A lot of Ranger owners go straight to aggressive all terrains or mud terrains because they look the part on…

By Chris 14 min read Published Last updated:

Ford Ranger Tyres: What to Buy for Road, Sand, Mud and Touring
Table of contents

A lot of Ranger owners go straight to aggressive all terrains or mud terrains because they look the part on a ute. But tyre choice affects more than grip. It changes road noise, wet braking, fuel economy, ride comfort, payload margin, steering feel, spare tyre strategy and how the Ranger behaves with a canopy, drawers or a towing setup behind it.

The toughest looking tread is not automatically the best tyre for your Ranger. The best tyre is the one that matches how the vehicle actually spends its time.

This guide covers the highway vs all terrain vs mud terrain decision, popular Ranger sizes, five brand options, a tyre pressure guide by surface and the payload and noise trade offs that most tyre reviews skip.

Quick answer: what tyres suit most Ford Ranger owners?

For most Ranger owners, a quality all terrain tyre is the best compromise between on road comfort and off road capability.

Choose highway terrain if the Ranger is mostly on road, towing on sealed roads, commuting or carrying work gear around town.

Choose all terrain if you do touring, gravel roads, beach trips, job sites and occasional tracks. This is where most Ranger owners land.

Choose mud terrain if you regularly drive mud, ruts, rocky tracks or remote off road routes where traction matters more than noise and comfort.

The honest line: if your Ranger spends 80 to 90 percent of its life on bitumen, a mud tyre is usually the wrong tyre. You will pay more, hear more road noise, use more fuel and wear the tread faster than a quality all terrain would.

Start with the tyre placard, not the internet

Why the placard matters

Ford’s tyre guidance says the vehicle placard documents the correct tyre specifications: size, capacity rating, speed rating and suggested pressure. That should be the starting point before changing size, load rating or tyre type. The placard is inside the driver’s door frame on most Rangers.

Do not copy someone else’s Ranger

A Wildtrak, XLT, Raptor, PX3 and Next Gen Ranger may have different wheels, offsets, guards, suspension and placard specifications. A tyre that fits perfectly on someone’s XLT with 17 inch wheels may not work on your Wildtrak with 18 inch wheels. Confirm your own vehicle’s specs.

Legal and roadworthy note

Tyre size rules vary by state and vehicle classification. In Victoria, there are conditions allowing a suspension lift plus tyre diameter increase totalling up to 75 mm, with tyre radius increase capped at 25 mm as part of that allowance. Other states administer modification rules differently. Do not treat one state’s rules as national advice. Check your state’s requirements before jumping to larger tyres.

Highway terrain vs all terrain vs mud terrain

Highway terrain tyres

Best for: Daily driving, towing on sealed roads, fleet and work utes, lower noise, better road comfort, better fuel economy.

Trade offs: Less sidewall protection. Weaker in mud and on sharp rock. Less aggressive tread for loose surfaces. Not the tyre for regular off road use.

All terrain tyres

Best for: Mixed work and weekend use, touring, gravel roads, beaches, light mud, canopy builds that still drive daily.

Trade offs: More noise than highway tyres. Often heavier. May increase fuel use slightly. Some ATs are more road biased, others lean more toward off road. Not all all terrains behave the same.

Mud terrain tyres

Best for: Mud, rutted tracks, serious off road use, rocky terrain where stronger construction and deeper lugs matter.

Trade offs: Louder on the highway. Heavier. Worse wet road feel in many cases. Faster or uneven wear if used mostly on sealed roads. Higher fuel consumption. Less comfortable for daily driving.

Hybrid AT/MT tyres

These sit between all terrain and mud terrain. The Nitto Ridge Grappler is the most common example in the Ranger market: an all terrain style centre tread pattern paired with more aggressive mud terrain style shoulder lugs. Good for owners who want a tougher look and more off road grip than a standard AT, without committing to a full mud terrain.

Common mistake: Buying mud terrain tyres for the looks when the Ranger mostly does highway. You get louder, heavier, less fuel efficient tyres that wear faster on bitumen and do not perform as well in the wet as a quality all terrain.

Popular Ford Ranger tyre sizes

Common factory and factory equivalent sizes

Ranger generation / variant Common tyre sizes
PX / PX2 / PX3 work and XLT variants 255/70R16, 265/65R17
PX / PX2 / PX3 higher trims 265/60R18, 265/50R20
Next Gen XLT 255/70R17
Next Gen Wildtrak 255/65R18
Raptor Confirm variant placard specifically

Common upgrade sizes (not automatic fitments)

These sizes appear regularly in Ranger tyre discussions: 265/65R17, 265/70R17, 275/65R18, 285/70R17. They are common upgrade sizes, but they are not guaranteed to fit every variant without checking clearance, offset and guard clearance at full lock and full compression.

What bigger tyres actually change

Going up in tyre size is not free. Bigger tyres change ground clearance (up), gearing feel (taller ratio, the engine works harder at highway speed), speedometer reading (reads slower than actual speed), fuel consumption (heavier tyre, more rolling resistance), braking distance (more rotating mass), spare tyre fitment (may not fit under the tub anymore) and potential rubbing at full steering lock or full suspension compression.

Ford specifically warns that size differences across axles should be minimised to protect AWD and 4WD systems.

Brand comparison: BFG vs Falken vs Toyo vs Cooper vs Nitto

BFGoodrich All Terrain T/A KO3

Positioning: The legacy all terrain name. The KO3 is the successor to the KO2, which was one of the most popular all terrain tyres in Australia for over a decade. Strong touring reputation. Available in common Ranger sizes including 265/70R17 and 265/65R18. M+S rated with the Three Peak Mountain Snowflake symbol.

Best for: Buyers who want a proven all terrain brand with serious off road credibility and broad LT size availability.

Falken Wildpeak AT3W

Positioning: Strong all round all terrain tyre. Popular value and comfort option. Falken Australia positions the AT3W with 3D Canyon Sipes for improved wet and snow grip and lower sidewall technology for better handling. Available in Ranger friendly sizes with a dedicated Ford Ranger fitment page on Falken’s website.

Best for: Ranger owners who daily drive but still do touring, gravel roads and beach trips. Strong reputation as a comfortable, quieter AT with good value.

Toyo Open Country A/T III

Positioning: Strong mileage and value story. Sensible touring all terrain. Toyo positions the Open Country A/T III around all terrain performance combined with long tread life.

Best for: Owners who want a capable all terrain that lasts, without paying a premium for a brand name. Good for Rangers that accumulate high annual kilometres.

Cooper Discoverer AT3 LT

Positioning: Designed specifically for utes, 4WDs and light trucks carrying heavy loads across sealed and unsealed roads. Cooper Australia markets the AT3 LT with an Australia wide mileage warranty of up to 80,000 km, which is one of the strongest mileage commitments in the AT market.

Best for: Work and touring Rangers carrying canopy weight, tools or towing gear. The LT construction and load carrying focus suit Rangers that run heavy every day. For how accessory weight stacking affects tyre choice, see our Ford Ranger touring build guide with weight breakdowns by tier.

Nitto Ridge Grappler

Positioning: Hybrid AT/MT design. Tougher look than most all terrains. More aggressive than a standard AT, less extreme than a full mud terrain. Nitto positions the Ridge Grappler as blending AT and MT characteristics for owners who want both grip and appearance.

Best for: Buyers who care about appearance and off road grip but do not want the full noise, weight and wear trade offs of a dedicated mud terrain.

Mud terrain options worth knowing

Cooper Discoverer STT Pro: Serious off road and mud focus with self cleaning mud features. For Rangers that spend significant time in genuine mud and off road conditions.

Nitto Trail Grappler M/T: Aggressive mud terrain. Nitto claims quieter road behaviour than older mud terrain designs, though it is still noticeably louder than any AT.

Tyre pressure guide by surface

These are starting points, not prescriptions. Actual pressures depend on your specific tyre construction, load, speed and conditions. Always start with the tyre placard for highway use.

Surface Starting pressure range
Highway (loaded) Use placard, adjust for load
Gravel and corrugations ~26 to 32 PSI
Hard beach ~18 to 22 PSI
Soft sand ~15 to 18 PSI
Mud ~20 to 25 PSI
Slow rock work ~22 to 28 PSI

Always air back up before returning to sealed roads. Running low pressures at highway speed generates heat that can cause tyre failure. Carry a quality compressor and deflator as standard touring gear. For how compressors and tyre gear fit into a recovery setup, see our Ford Ranger recovery gear guide covering what to carry and when to upgrade.

How tyre choice affects fuel economy, noise and comfort

Fuel economy

Heavier LT tyres take more energy to accelerate and maintain speed. Aggressive tread patterns increase rolling resistance. Larger tyres change effective gearing. The difference between a set of highway tyres and a set of heavy mud terrains can be 1 to 3 L/100km depending on the size and driving conditions. On a Ranger doing 20,000 km a year, that adds up.

Road noise

As a general rule: highway terrain is quietest, all terrain sits in the middle and mud terrain is loudest. Road noise from mud terrains often gets worse as the tread wears unevenly. If you daily drive a Ranger with a canopy (which amplifies noise from the rear), tyre noise matters more than you might expect.

Ride comfort

LT construction tyres have stiffer sidewalls than passenger rated equivalents. That stiffness is useful off road and when carrying heavy loads, but it makes the ride firmer on smooth roads. Lighter passenger rated tyres usually ride better in an unloaded Ranger, but may not suit heavy touring or work loads.

How tyre choice affects payload and GVM

Tyres add weight too

A set of five heavier LT mud terrain tyres (including the spare) can add 20 to 40 kg of unsprung weight compared with lighter factory tyres. That weight comes off your available payload and it affects acceleration, braking and fuel economy because it is rotating mass.

Heavier tyres plus accessories add up

Combine heavier tyres with a canopy, drawers, bull bar, winch, roof rack, recovery gear, water and towball download and the weight stacking becomes significant. Every kilogram matters when the Ranger’s factory payload is roughly 985 to 1,050 kg. For how the full accessory stack pushes toward GVM limits, see our Ford Ranger suspension and GVM upgrade guide covering when a GVM upgrade becomes necessary.

Load rating matters

Do not just buy by tread pattern. Make sure the tyre’s load rating suits the Ranger’s placard requirements, your actual load and your use case. A tyre rated below the placard requirement is a safety and compliance issue.

Spare tyre strategy for touring

Full size matching spare

Best for touring, remote trips and longer trips where a flat needs to be fixed properly. A matching spare means the same rolling diameter as the other four, which matters for 4WD system health and makes tyre rotation simpler.

Five tyre rotation

Rotating all five tyres (including the spare) through the vehicle over time gives more equal wear and extends total usable life. It also keeps the spare fresh instead of sitting unused for years.

Two spare strategy

For genuinely remote trips (Simpson Desert, Canning Stock Route or extended outback travel), carrying a second spare is common. That means a second carcass or complete wheel, a tyre repair kit (plug kit, not just aerosol) and a compressor. Do not rely on one spare if the trip is genuinely remote.

Check spare clearance after upsizing

Bigger tyres may not fit neatly under the tub in the factory spare location, especially with towbars, long range tanks or aftermarket setups. Check clearance before discovering the problem on a remote track.

Best tyre choice by Ranger use case

Daily driver or family Ranger

Highway terrain or mild all terrain. Comfort, noise and fuel economy matter more than aggressive tread. A quality road biased AT gives peace of mind for occasional gravel without the daily compromise of a heavy off road tyre.

Work ute with canopy and tools

All terrain with a suitable load rating. LT construction makes sense if the Ranger runs heavy every day. Avoid over aggressive tyres unless the job sites genuinely justify it. The Cooper AT3 LT with its 80,000 km mileage warranty is a strong option for work Rangers.

Touring Ranger

Quality all terrain is usually the best starting point. Consider LT construction if the Ranger is loaded and regularly on dirt. Carry a matching full size spare and a tyre repair kit.

Beach Ranger

All terrain or even highway terrain can work well on sand when pressures are managed properly. Aggressive mud tyres are not automatically better on sand. Wide, flexible tread that floats on the surface often works better than deep lugs that dig in.

Mud and harder tracks

Mud terrain or hybrid AT/MT if the off road use is frequent enough to justify the noise, wear and weight trade offs on sealed roads.

What we recommend at Oz Canopies & 4×4

For most Ranger owners running a canopy, drawers and touring gear, a quality all terrain in LT construction is the sweet spot. It handles the load, works on gravel, sand and light mud and does not punish you with excessive noise and fuel consumption on the highway. Mud terrains make sense for a smaller group of owners who genuinely spend significant time in mud and on rough tracks.

Common tyre mistakes

  • Buying mud tyres for looks when the Ranger mostly does highway
  • Upsizing without checking legal rules, rubbing clearance and speedometer impact
  • Forgetting load rating after adding a canopy, drawers and towing gear
  • Running highway pressures on sand (air down properly)
  • Not airing back up before returning to sealed roads
  • Mixing tyre sizes across axles on a 4WD (risks drivetrain damage)
  • Forgetting the spare when upgrading tyre size (the old spare no longer matches)
  • Assuming all all terrain tyres behave the same (they vary enormously in road noise, wet grip and tread life)

Tyre buying checklist

Before buying tyres for a Ranger:

  • What size is on the tyre placard?
  • What wheel size is fitted now?
  • Is the Ranger mostly highway, touring, work or off road?
  • Do you carry canopy, drawer or tool weight every day?
  • Do you tow?
  • Do you need LT construction for load carrying?
  • What noise level can you live with on the highway?
  • Will the spare still fit under the tub or in its current location?
  • Will the tyre rub at full lock or full suspension compression?
  • Is the tyre size legal in your state?
  • Are you prepared for higher fuel use with heavier or more aggressive tyres?

Frequently asked questions

What are the best tyres for a Ford Ranger?

For most owners, a quality all terrain tyre is the best balance. BFG KO3 for proven off road credibility. Falken Wildpeak AT3W for value and comfort. Cooper AT3 LT for load carrying work and touring Rangers. Nitto Ridge Grappler for a tougher look without going full mud terrain.

Are all terrain tyres worth it on a Ranger?

Yes, for most owners who do any combination of gravel, beach, touring or light off road driving. The extra grip, sidewall protection and versatility over highway tyres is worth the small increase in noise and fuel consumption.

Are mud tyres too noisy for daily driving?

For most people, yes. Mud terrain tyres are noticeably louder on sealed roads and the noise often increases as the tread wears. If the Ranger is a daily driver, a quality AT is usually a better compromise.

What tyre size fits a Next Gen Ranger?

Common factory sizes are 255/70R17 (XLT) and 255/65R18 (Wildtrak). Common upgrade sizes include 265/65R17, 265/70R17 and 275/65R18, but check clearance, offset and legal compliance before upsizing.

What tyre size fits a PX3 Ranger?

Common factory sizes are 265/65R17 and 265/60R18 depending on variant. Check the tyre placard on your specific vehicle.

Do bigger tyres affect fuel economy?

Yes. Bigger, heavier tyres increase rolling resistance and change effective gearing. The difference can be 1 to 3 L/100km depending on size and driving conditions.

Do I need LT tyres for towing or canopy setups?

Not always, but LT construction handles heavier loads more safely than passenger rated equivalents. If the Ranger runs heavy every day (canopy, tools, towing), LT is usually the better choice for load carrying and sidewall strength.

What pressure should I run on sand?

Start around 15 to 18 PSI for soft sand, depending on tyre construction and load. Always air back up to road pressures before returning to sealed roads. Carry a deflator and compressor.

Can I run bigger tyres without a lift?

Some mild upsizes fit without a lift (for example, going from 255/70R17 to 265/65R17 on a Next Gen XLT). Larger sizes may rub at full lock or full compression. Check clearance and legal limits in your state before committing.

Should I carry two spares when touring?

For remote trips (outback, desert crossings, extended unsealed travel), yes. For regular touring on maintained roads, one matching full size spare plus a tyre repair kit and compressor is usually sufficient.

What to read next for your Ranger build

Trying to pick tyres for your Ranger build?

Tell us how you use the ute, what size is on it now, whether you run a canopy or tow and how much off road driving you actually do. We can help narrow it down to highway, all terrain, hybrid or mud terrain without overdoing it.

Call us on 02 9627 8666, text 0440 130 098 or visit our showroom at 20 Walker St, South Windsor, Sydney. Over 700 five star Google reviews.