Best Towbars for Ford Ranger: Hayman Reese vs TAG vs ARB Compared

Picking the “best towbar” for your Ranger is a bit like asking which canopy is best. The answer depends on…

By Chris 22 min read Published Last updated:

Best Towbars for Ford Ranger: Hayman Reese vs TAG vs ARB Compared
Table of contents

Picking the “best towbar” for your Ranger is a bit like asking which canopy is best. The answer depends on what you’re towing, how your ute is set up and what you plan to bolt onto the back.

Here’s the trap most buyers fall into: they Google “best Ranger towbar,” find a brand they like order it, then discover it doesn’t suit their rear step, needs a bumper cut they didn’t expect or requires dealer coding nobody mentioned. By the time they find out, the bar is sitting in their garage and the installer is shaking their head.

This guide sorts all of that before you spend a dollar. By the end you’ll know which towbar fits your specific Ranger variant, what it actually costs (supply and fitted) and what wiring, coding and coupling decisions you need to make along the way.

Quick Answer: Which Towbar for Which Setup?

If you’re short on time, here’s the cheat sheet.

Off road touring with recovery priority: Hayman Reese X Bar or TAG XR (Extreme Recovery). Both have rated recovery points and improved departure angles.

Workhorse towing (trailers, boats, caravans): TAG Heavy Duty, Ironman 4×4 Heavy Duty or Hayman Reese Heavy Duty. All hit 3,500kg tow capacity at a lower price point than recovery style bars.

Maximum rear end protection plus towing: ARB Summit MKII Rear Step Tow Bar or Ironman 4×4 Rear Protection Tow Bar. Steel rear step replacement with integrated hitch and jack points.

Budget friendly, simple towing setup: Ironman 4×4 Heavy Duty (from around $627 supply) or TAG Heavy Duty (from around $746 supply for Next Gen Styleside).

Factory integration baseline: Genuine Ford Tow Pack. Good if your Ranger already came with the factory towing kit or you want full OEM warranty coverage through a Ford dealer.

One important disclaimer: always verify your specific Ranger’s variant, build date and rear bumper configuration before ordering. The wrong bar for the wrong model is a costly mistake.

Identify Your Ford Ranger First (Fitment Gate)

Before you even look at brands, you need to nail down four things. Get any of these wrong and the towbar you order won’t fit.

PX Series (2011 to 2022) vs Next Gen (2022 Onwards)

The PX series Rangers (PX1, PX2, PX3) share a common platform. Most aftermarket towbars that fit a PX2 will also fit a PX3.

The Next Gen Ranger (sometimes called MY22 or T6.2) launched mid 2022 and is a completely different platform. PX towbars do not fit Next Gen Rangers. Full stop.

To make things more confusing, Ford released the MY25.25 update from November 2024. Some towbar manufacturers (Hayman Reese, TAG) have released new part numbers specifically for MY25.25 models. If your Ranger was built after November 2024, double check that your towbar listing explicitly states it suits MY25.25/PY models.

Ute (Styleside Tub) vs Cab Chassis

This changes everything about towbar selection. Cab chassis models don’t have a rear step bumper, which means different mounting points and a different bar design. Almost every brand has separate part numbers for tub body and cab chassis.

Common mistake: ordering a tub body towbar for a cab chassis Ranger set up with a tray. The mounting points are different even if the tray looks similar to a tub.

Rear Step and Bumper Style

Your Ranger’s rear step/bumper configuration directly affects which towbar you need. Some bars require bumper removal during fitment. Some need a bumper cut out. Some replace the rear step entirely.

If your Ranger has had a factory Ford towbar or tow pack fitted previously, be extra careful. TAG explicitly warns that their T4F574 towbar “will not suit the relocation of the bumper where it has been removed from a Ford Factory/OEM Towbar. The bumper mounting arms for Ford Factory/OEM towbars differ from those step bumpers that mount directly to the chassis.”

Quick Fitment Checklist

Before ordering, confirm all of these:

  • Build date and series (PX1 / PX2 / PX3 / Next Gen MY22 / MY25.25)
  • Body style: tub (styleside) or cab chassis
  • Rear step/bumper type: factory original or modified
  • Previous tow pack history: has an OEM towbar been fitted (or removed)?
  • Do you need an extended towbar for an aftermarket tray or canopy overhang?

If you’re running a canopy on your Ford Ranger, the rear end compatibility matters even more. Some towbars interfere with BLIS (Blind Spot Information System) sensors that sit in the taillights and canopy or tray conversions can relocate these. The Ford Ranger Canopy Setup Guide covers rear end compatibility in detail.

Ratings 101: Tow Rating, Ball Weight and What Actually Limits You

Towbar Rating vs Vehicle Rating

Most aftermarket towbars for the Ranger are rated to 3,500kg towing capacity with 350kg ball weight. That matches the Ford Ranger’s maximum braked towing capacity across most variants.

But here’s the thing: the towbar rating isn’t usually what limits you. The vehicle’s Gross Vehicle Mass (GVM), Gross Combination Mass (GCM) and your actual payload situation are almost always the real bottleneck.

All towbars mentioned in this guide must comply with Australian Design Rule ADR 62/02 for towbar strength. Reputable brands like Hayman Reese, TAG and ARB test to AS 4177 (the Australian Standard for towbars and towing) in NATA accredited laboratories.

The Hidden Limiter: Payload and Ball Weight

Ball weight (also called towball download or tongue weight) eats directly into your Ranger’s payload capacity. Once you add a canopy (55 to 100kg), drawers (25 to 45kg), a fridge and battery setup, passengers and cargo, your remaining payload for ball weight might be far less than the towbar’s 350kg rating.

This is especially relevant if your Ranger is running a touring setup. The load considerations section of the Ford Ranger Canopy Setup Guide breaks down how canopy weight, accessories and GVM upgrades all interact with your towing capacity.

The National Transport Commission’s (NTC) Load Restraint Guide for Light Vehicles is a solid reference for understanding how ball weight, payload and axle loads interact. VSB 14 (Vehicle Standards Bulletin 14) also sets out the compliance framework for any modifications that affect your vehicle’s towing and load carrying ratings.

Rear End Compatibility and Bumper Cut Requirements

This is the section most competitor articles skip and it’s where buyers get caught out most often.

Bumper Removal vs Bumper Cut

Different towbar designs handle the rear bumper differently.

Bumper removed during fitment (reinstalled after): TAG Heavy Duty bars typically require bumper removal but no permanent cut. The bumper comes off, the bar goes on the chassis and the bumper is refitted around it.

Bumper cut out required: Hayman Reese concealed design bars (like the 03408RW for Next Gen Ranger) require a section of the bumper to be cut so the hitch receiver sits hidden behind it. This gives a cleaner look but is permanent.

Full bumper replacement: ARB Summit MKII Rear Step and Ironman Rear Protection bars replace the factory rear step entirely with a steel unit. The original plastic bumper/step is removed and doesn’t go back on.

OEM Bumper Arm Warning

This is a genuine gold nugget that most buyers miss. If your Ranger previously had a Ford Factory/OEM towbar fitted and then removed, the bumper mounting arms may have been changed. TAG’s own product listing warns that their standard PX towbar (T4F574) won’t work with relocated bumper arms from a removed OEM tow setup. You’d need a different TAG part number (T7F704) for that scenario.

Always check your listing for these details before ordering:

  • “Suits models with rear step” or “suits models without rear step”
  • “Bumper removed during fitment” (temporary removal, not permanent)
  • “Bumper cut out required: Yes/No”
  • “Suits vehicles with/without existing Ford tow kit”
  • “Coding required: Yes/No”

Departure Angle and Clearance

For off road use, departure angle matters. Recovery style bars like the Hayman Reese X Bar and TAG XR sit higher on the chassis (up to 100mm higher in the X Bar’s case) to improve departure angle by up to 5 degrees compared with some OEM and lower hanging aftermarket bars. The ARB Summit MKII also addresses this with its steel step design that tucks closer to the body.

If you’re regularly on tracks and fire trails, a bar that hangs too low will cop rock strikes and limit your ability to climb out of ruts.

Wiring and Plugs: 7 Pin vs 12 Pin (and What Most People Get Wrong)

7 Pin Flat Basics

The 7 pin flat plug handles your standard trailer lighting: indicators, brake lights, tail lights, reverse lights and earth. It’s all you need for a box trailer, boat trailer or basic camper trailer.

Under Australian Standard AS 4177.5, the 7 pin flat is the standard connector for trailers up to 3,500kg ATM. It covers basic lighting circuits and nothing more.

12 Pin Flat (Caravans and Accessories)

The 12 pin flat adds extra circuits beyond basic lighting. These typically include a charging circuit for the trailer/caravan battery, fridge power, reverse light and additional auxiliary circuits.

If you’re towing a caravan with its own battery system, fridge or electric brakes with their own controller, you’ll likely want 12 pin capability. Many touring setups use a 7 pin flat for lights plus a separate Anderson plug for auxiliary power and charging, which works just as well and gives more flexibility.

What to Budget For

Wiring is almost always sold separately from the towbar. Expect to pay:

  • TAG Direct Fit wiring harness: around $275
  • Erich Jaeger CAN Bus wiring harness (suits TAG and others): around $455
  • Hayman Reese SmartCode ECU and harness kit: included in their towbar kits (when buying the kit version)

Common mistake: buying a towbar without wiring and assuming your installer will “sort it out.” The wiring harness needs to be vehicle specific and CAN Bus compatible on modern Rangers. A generic universal loom is not the right approach on a Next Gen Ranger.

Brake Controllers, Coding and Modern Ranger Electronics

Coding: The Hidden Step

On Next Gen Rangers, fitting a towbar isn’t just a mechanical job. The vehicle’s electronics need to be told a towbar exists.

Hayman Reese uses their SmartCode system. After physical installation, the vehicle needs to be coded using a SmartCode handset (or through the Ford IDS tool at a dealer) to enable towing functions like trailer light monitoring, reverse sensor behaviour and stability control adjustments.

TAG towbars with Erich Jaeger CAN Bus wiring note that “coding is optional, primarily required if automatic rear parking sensor deactivation is desired.” So the towbar will work mechanically without coding, but your reversing sensors may not behave properly when a trailer is connected unless the coding is done.

Practical takeaway: if your towbar listing mentions CAN Bus harness or coding required, budget for an installer who can do the coding. Not every mechanic or 4×4 shop has the right diagnostic tool. A Ford dealer or a towbar specialist with the appropriate scan tool is your best bet.

Brake Controllers

If you’re towing anything over 750kg (which includes most caravans, boat trailers with larger boats and loaded work trailers), you need electric trailer brakes and a brake controller. The brake controller is a separate purchase and installation from the towbar itself. Budget $200 to $600 for the controller plus fitting.

The Department of Infrastructure, Transport, Regional Development and Communications oversees ADR compliance including braking requirements. Under Australian law, trailers over 750kg ATM must have their own braking system and trailers over 2,000kg ATM must have brakes on all wheels.

DO35 Coupling and Weight Distribution Hitch Compatibility

What Is the DO35?

The Cruisemaster DO35 is an off road coupling that replaces the standard ball and socket connection on the trailer or caravan. It attaches to a standard 50mm towball but provides significantly more articulation, which is a major advantage for off road towing. It’s become hugely popular in the Australian touring and caravan market.

All five towbar brands in this guide use a standard 50mm hitch receiver or towball, which is physically compatible with the DO35. But compatibility gets more interesting when you add a Weight Distribution Hitch (WDH) to the mix.

WDH Compatibility With DO35

Yes, the DO35 can be used with a Weight Distribution Hitch, but there are important caveats.

The Cruisemaster DO35 V3 and V3Plus models have been tested with popular WDH systems including Hayman Reese Classic, Hayman Reese Standard, Milford and EZ lift. In most cases, V3 models don’t require additional adaptors. However, Cruisemaster does offer adaptor kits for Hayman Reese systems if extra clearance is needed.

Older DO35 V2 models are only suitable with Hayman Reese Classic or Standard WDH systems when used with a Cruisemaster adaptor kit. Hayman Reese is currently the only WDH brand that Cruisemaster has officially tested and approved adaptors for.

Key cautions with DO35 plus WDH setups:

  • WDH systems add additional loads to the coupling. The DO35 is rated to a maximum vertical load of 350kg. Stay within this.
  • Always check that the coupling movement is not restricted. The WDH can foul on the trailer drawbar during tight reversing.
  • Have your installer check clearances at all angles before you hit the road.
  • A WDH changes load distribution across your vehicle’s axles. Make sure your total combination (vehicle weight, payload, ball weight, WDH loads) stays within your Ranger’s GVM and GCM ratings.

The 5 Brand Comparison

Comparison Matrix

Feature Hayman Reese HD Hayman Reese X Bar TAG Heavy Duty TAG XR Recovery ARB Summit MKII Ironman HD Ironman Rear Protection
Suits PX + Next Gen (separate SKUs) PX + Next Gen (separate SKUs) PX + Next Gen (separate SKUs) PX + Next Gen (separate SKUs) Next Gen tub body PX + Next Gen Next Gen tub body
Tow / Ball 3,500kg / 350kg 3,500kg / 350kg 3,500kg / 350kg 3,500kg / 350kg 3,500kg / 350kg 3,500kg / 350kg 3,500kg / 350kg
Recovery points D shackles only 8T centre + 2x 4T side D shackles only 2x WLL 4,500kg Optional 8T recovery points No (HD) Yes, plus hi lift jack points
Departure angle Standard Improved (sits ~100mm higher) Standard Improved (flush chassis mount) Improved (steel step design) Standard Improved (step design)
Wiring included Kit versions include ECU + harness Kit versions include ECU + harness Sold separately ($275 to $455) Sold separately ($275 to $455) Compatible with OE or ARB wiring Sold separately Sold separately
Coding required Yes (SmartCode) Yes (SmartCode) Optional (sensor deactivation) Optional (sensor deactivation) Depends on wiring choice Depends on wiring choice Depends on wiring choice
Bumper cut Yes (concealed design) Varies by model No (bumper removed + refitted) No (bumper removed + refitted) Replaces rear step No (works with factory bumper) Replaces rear step
Price (supply) ~$1,100 to $1,500 (kit) ~$1,500 to $1,800 ~$746 to $1,175 ~$979 to $1,389 From ~$2,088 From ~$627 ~$1,454
Warranty Limited lifetime (original owner) Limited lifetime (original owner) Limited lifetime Limited lifetime ARB warranty Ironman warranty Ironman warranty

All prices are approximate, GST inclusive, supply only. Fitted prices will add $350 to $650+ depending on complexity and wiring.

Hayman Reese (Heavy Duty and X Bar)

Positioning: Premium Australian manufacturer. Melbourne production facility with NATA accredited testing lab. Hayman Reese essentially invented the heavy duty towbar in Australia and remains the benchmark brand.

The Heavy Duty range uses a concealed design with a 50mm square hitch receiver. It’s a clean look but requires a bumper cut. The SmartCode system is their key differentiator. The towbar kit comes with the ECU and harness and once coded, your Ranger knows the towbar is there. This enables proper trailer stability control, trailer light fault detection and automatic reverse sensor behaviour.

The X Bar is the off road option. It sits higher on the chassis for improved departure angles, features an 8 tonne rated centre recovery point and two 4 tonne side recovery points and uses thicker side arms with 700 grade forged steel construction. X Bars retail between $1,500 and $1,800 depending on the model. For Next Gen Rangers with canopies or trays, Hayman Reese has developed X Bar variants that work around relocated BLIS sensors.

All Hayman Reese towbars are designed to be compatible with Weight Distribution systems and work with both standard towballs and DO35 couplings.

What we like: SmartCode integration, lifetime warranty, broad SKU coverage across all Ranger generations, WDH and DO35 compatibility well documented.

TAG (Heavy Duty and Extreme Recovery)

Positioning: Australian made for over 35 years. TAG has one of the largest ranges of Ranger specific towbars with separate SKUs for every body style, generation and bumper configuration.

The Heavy Duty range is straightforward and well priced. The Next Gen Styleside bar starts from around $746 supply (via retailers like Outback Equipment). It’s a 3 piece design for easier installation, uses factory mounting points and comes with towball, ball mount, pin, clip and D shackles. Bumper is removed during fitment but no permanent cut is needed.

The TAG XR (Extreme Recovery) is their off road weapon. It features two WLL 4,500kg rated recovery points integrated into the 3 piece side arms with bevelled edges for soft shackles, a flush chassis mounted profile for maximum ground clearance and an 89mm x 89mm extreme duty reinforced crossbar. The trailer and Anderson plug mounts are protected on top of the bar rather than hanging underneath. Next Gen cab chassis XR starts from $1,389 supply.

TAG wiring is sold separately. Their own Direct Fit harness runs around $275 and the Erich Jaeger CAN Bus option around $455. Coding is optional but recommended for proper sensor behaviour.

What we like: Excellent Ranger specific fitment notes on every listing (bumper type, step requirements, OEM bumper arm warnings), competitive pricing, strong recovery bar option.

Common mistake to watch for: TAG explicitly warns that some of their PX series bars won’t suit Rangers where a Ford Factory/OEM towbar has been removed, because the bumper arms are different. Always read the fitment notes carefully.

ARB (Summit MKII Rear Step Tow Bar)

Positioning: Premium protection focused option. ARB is a Ford Licensed Accessories partner, meaning their gear can be fitted through Ford dealers with full factory warranty coverage (five year, unlimited kilometre when purchased and fitted through Ford).

The Summit MKII Rear Step replaces the factory plastic rear step with a steel unit that integrates a 3.5T Class 4 towbar, anodised aluminium tread plate and four ARB Jack/Hi Lift jack points. It retains compatibility with OE licence plate lights and rear parking sensors. A spring loaded access panel hides the trailer plug anderson plug mount and provisions for an ARB air compressor outlet and trailer camera.

Optional 8T rated recovery points can be added. Lower tub protection tubes are also available as an add on.

Pricing starts from $2,088 (ARB retail East Coast Metro RRP, excluding fitment). Fitting time is approximately one hour, with published fitting rates around $130.

What we like: Ford Licensed Accessories warranty pathway, excellent integration with factory systems, provisions for air compressor and camera wiring, serious rear end protection.

The trade off: it’s the most expensive option in this comparison by a fair margin. You’re paying for the protection, the factory level integration and the ARB brand.

Ironman 4×4 (Heavy Duty and Rear Protection)

Positioning: Value oriented with solid capability. Ironman is well known for bull bars and suspension and their towbar range follows the same approach: good quality at a competitive price.

The Heavy Duty Tow Bar is the budget entry point. It starts from around $627 supply for the Next Gen Ranger. It’s a straightforward Class 4 bar with a 50mm hitch, towball and tongue included. It works with the factory rear bumper (no cut, no replacement needed) and installation is described as no cut and using factory mounting points. Wiring loom is sold separately.

The Rear Protection Tow Bar is their step up option at around $1,454 supply. It replaces the factory rear step with a steel unit that includes rated recovery/tow points, two hi lift jack points on either side and an integrated 50mm hitch. Space for a 7 pin flat trailer plug is built into the bar. The wiring loom is plug and play but sold separately.

What we like: the Heavy Duty bar is genuinely hard to beat on price for a simple towing setup. The Rear Protection bar packs a lot of features for the money compared to ARB’s offering.

The trade off: Ironman doesn’t currently offer the same level of CAN Bus integration or SmartCode style coding as Hayman Reese and recovery point ratings aren’t as prominently published as TAG’s XR range.

A Note on Parkside Towbars

Parkside Towbars is a WA based retailer and fitting specialist that sells towbars from major brands (including Hayman Reese) and offers transparent supply vs fitted pricing. They’re worth mentioning because their pricing model, showing both the supply only and supply plus fit price side by side, is genuinely useful for budgeting. If you’re in Perth, they’re a solid option for getting a towbar fitted with clear, upfront costs. Check their website for current Ford Ranger pricing.

What Should a Towbar Install Actually Cost?

Installed towbar pricing varies, but here’s a framework to help you budget.

Hardware (towbar + tongue + towball): This is your supply price. Ranges from around $627 (Ironman HD) to $2,088+ (ARB Summit MKII) depending on brand and type.

Wiring harness + ECU/module: $275 to $455 if sold separately (TAG, Ironman). Included in Hayman Reese kit versions.

Coding (if required): $50 to $150 for SmartCode or IDS coding. Some installers include this in the fitting price, others charge separately.

Labour: Most towbar installs run between 1 and 2.5 hours depending on complexity. At typical shop rates, expect $150 to $400+ for labour alone.

Realistic all in estimates (Next Gen Ranger, supply + fit + wiring + coding):

  • Budget setup (Ironman HD + wiring + basic fit): $1,100 to $1,500
  • Mid range (TAG HD or Hayman Reese HD kit + fit + coding): $1,500 to $2,200
  • Recovery style (TAG XR or Hayman Reese X Bar + wiring + fit + coding): $2,000 to $2,800
  • Premium protection (ARB Summit MKII + wiring + fit): $2,400 to $3,000+

These are guide figures. Get a written quote from your installer that includes everything: bar, wiring, coding and any bumper modification.

What We Recommend at Oz Canopies & 4×4

We see Rangers come through our South Windsor showroom every week with canopies, drawers, fridges and touring gear. The towbar choice matters because it’s the last thing on the back of the vehicle and it affects departure angle, payload budget and access to your trailer plug.

For most of our canopy customers who tow regularly, a TAG Heavy Duty or Hayman Reese Heavy Duty kit is the sweet spot. Good quality, properly rated and well priced. If you’re doing serious off road touring with a loaded canopy setup, the Hayman Reese X Bar or TAG XR is worth the extra spend for the recovery points and improved clearance.

Whatever you choose, make sure it’s ordered for the right Ranger variant. We’re happy to help you figure that out. Call us on 02 9627 8666, text 0440 130 098 or drop into the showroom at 20 Walker St, South Windsor NSW 2756.

Decision Framework: Picking the Right Bar

If you tow a caravan regularly

Prioritise a towbar with proper WDH compatibility (Hayman Reese is the best documented for this). Budget for 12 pin wiring or a 7 pin plus Anderson plug setup. Get a brake controller fitted at the same time as the towbar to save on labour costs. Make sure your total ball weight, including the WDH system loads, stays within 350kg and your GVM.

If you do off road touring with recovery needs

Go with a recovery style bar: Hayman Reese X Bar, TAG XR or ARB Summit MKII with optional recovery points. The rated recovery points are not just a nice to have on remote tracks. They could be the difference between a self recovery and a long wait for help.

If you have a canopy or tray fitted

Check that the towbar works with your specific tray or canopy setup. BLIS sensor relocation is a known issue on Next Gen Rangers with canopies. The Hayman Reese X Bar has specific variants designed for canopy/tray fitments. TAG’s 3 piece design also offers flexibility for different rear end configurations.

If you’re running a heavy touring canopy build (canopy, drawers, fridge, dual battery), your payload is already reduced. A lighter towbar that still hits 3,500kg towing might be preferable to a heavy rear protection bar, unless you need the steel protection for the tracks you’re running.

If you’re on a tight budget

Ironman 4×4 Heavy Duty from around $627 supply is hard to beat. Add a quality CAN Bus wiring harness and professional fitting and you’ll have a properly rated 3,500kg towing setup for well under $1,500 all in.

Next Step

Send us your Ranger’s build date, variant (XL, XLS, XLT, Sport, Wildtrak, Raptor), body style (tub or cab chassis) and rear bumper setup (standard, modified or previous OEM towbar removed). We’ll tell you exactly which towbar options fit and what the total installed cost looks like.

Phone: 02 9627 8666 Text: 0440 130 098 Showroom: 20 Walker St, South Windsor NSW 2756

Frequently Asked Questions

Can I fit a Next Gen Ranger towbar to a PX Ranger (or vice versa)?

No. The platforms are completely different. PX towbars will not fit Next Gen Rangers and vice versa. Always match the towbar to your specific Ranger generation.

Do I need to get my Ranger coded after fitting a towbar?

On Next Gen Rangers, yes, in most cases. Hayman Reese uses their SmartCode system. TAG and other brands using Erich Jaeger CAN Bus harnesses may require coding for automatic reverse sensor deactivation. The coding enables your Ranger to recognise the towbar and adjust systems like trailer stability control and parking sensors.

Will an aftermarket towbar void my Ford warranty?

Not if it’s fitted correctly and complies with ADR 62/02. ARB towbars purchased and fitted through Ford dealers are covered by the Ford factory warranty (five year, unlimited kilometre). Other brands won’t void your warranty provided the installation is done properly and doesn’t damage other vehicle systems.

What’s the difference between a concealed and exposed towbar?

Concealed bars hide behind the bumper with only the hitch receiver visible. They look cleaner but require a permanent bumper cut. Exposed bars are visible below or behind the bumper and generally don’t require a bumper cut.

Can I tow 3,500kg with any of these towbars?

All towbars in this guide are rated to 3,500kg towing capacity. But your actual towing limit depends on your Ranger’s GVM, GCM and how much payload you’ve already used up with passengers, cargo and accessories. The towbar rating is only one part of the equation.

Do I need a weight distribution hitch?

A WDH helps distribute the ball weight more evenly across the vehicle’s axles, improving stability and handling when towing heavy loads. It’s strongly recommended for caravans and heavy trailers. All towbars in this guide are compatible with WDH systems.

What’s the DO35 coupling and do I need one?

The Cruisemaster DO35 is an off road coupling that replaces the standard ball and socket trailer hitch. It offers more articulation for off road towing. All towbars in this guide work with the DO35 via their standard 50mm towball. If you tow off road regularly, it’s a worthwhile upgrade on the trailer/caravan side.

How long does a towbar installation take?

Most standard towbar installs take 1 to 2.5 hours. If wiring, coding and bumper modification are involved, allow half a day. ARB Summit MKII fitting is listed at about 1 hour for the bar itself, plus wiring time.

Your Next Move

The right towbar for your Ford Ranger comes down to three things: your exact variant, what you’re towing and how the rear of your ute is set up. Get those three right and the brand choice almost makes itself.

If you’re planning a canopy and towbar together, it pays to sort them at the same time. Towbar clearance, plug placement, BLIS sensor relocation and departure angle all tie into how your canopy sits on the tub. We deal with this combination every week at the showroom and can walk you through the whole setup in one visit.

Bring your build date, your towing plans and any photos of your rear bumper setup. We’ll match you to the right bar, the right wiring and get you a straight answer on total installed cost with no surprises.

Phone: 02 9627 8666 Text: 0440 130 098 Showroom: 20 Walker St, South Windsor NSW 2756