Best Drawer Systems for Toyota HiLux Canopies
Drawers are the single biggest upgrade you can make inside a HiLux canopy. They turn a dark cave of loose…
Table of contents
Drawers are the single biggest upgrade you can make inside a HiLux canopy. They turn a dark cave of loose gear into an organised, lockable system where everything has a spot and you can find it in seconds, not minutes. Security, faster access, less damage to your gear. That’s the pitch and it’s accurate.
Our pick: NewayWorks tub drawers. We stock and fit NewayWorks drawer systems and ship them Australia wide. See the NewayWorks drawer system or browse all drawer systems.
The mistake most buyers make? Picking a drawer system based on price or brand alone, without checking whether it actually fits their tub type, works with their canopy layout or suits the way they load and unload gear. A tradie pulling tools out six times a day needs something completely different to a tourer accessing a fridge slide on weekends.
This guide gives you a quick buyer comparison, a fitment checklist you can screenshot and the key features to look at before you spend.
Quick Answer (What to Buy for Your Use Case)
If you just want a starting point based on how you use your HiLux:
- Tradie (tools, daily use): Prioritise high load rating, slam shut latches, quality locks and runners that won’t bind when you’re grabbing gear on a slope. Serviceability matters too, because these drawers cop a beating five or six days a week.
- Touring (camping, weekend trips): Prioritise fridge slide access on top, dust sealing, tie down compatibility and a usable top deck surface for organising camp gear. Weight matters here because every kilo of drawer system is a kilo less of water, food or recovery gear.
- Mixed use (bit of both): Prioritise modularity. You want a system that can evolve as your build changes, with add on side floors, wing panels or accessory mounts. Something that works for site tools during the week and camping gear on Friday arvo.
Not sure which category you fall into? Use the three questions below to narrow it down.
The 3 Questions That Decide the “Best” HiLux Drawer System
There’s no single best drawer system. There’s only the best one for how you actually use your ute. These three questions sort it out quickly.
1. What Do You Carry Most Days?
Heavy hand tools and power tools need high load ratings and robust locking. You’re talking drills, grinders, impact drivers, maybe a rotary hammer. That’s concentrated weight that needs to stay put on rough roads.
Touring gear like camp chairs, recovery gear and kitchen setups need wider, shallower drawers with flexible dividers. You’re accessing this stuff less frequently, but when you do, you want to see everything at a glance rather than digging through layers.
Fragile gear (camera equipment, drones, electronics) needs tight fitting foam inserts and smooth runners that don’t jolt contents around on corrugations. If your runners have any slop in them, your gear pays the price.
2. How Do You Need to Access It?
Think about your typical day, not the ideal scenario.
- Daily grab (tradie): Fast open, grab what you need, slam shut. Latch quality and one handed operation matter more than anything. If it takes two hands to open a drawer when you’re holding a drill in the other, that gets old fast.
- Weekend load/unload (tourer): Full extension runners so you can reach the back of the drawer without climbing in. You’re packing and unpacking everything at once, so being able to see and access the full drawer depth is worth paying for.
- Fridge slide on top: If your fridge sits on top of the drawer unit, you need enough clearance between the top deck and canopy roof, plus a slide mechanism rated for the fridge weight. This is where a lot of people get the measurements wrong and end up with a fridge that won’t slide out far enough or a canopy door that won’t close.
3. Do You Want Fixed Fit Drawers or a Modular System?
This is a bigger decision than most people realise.
Fixed tub drawer kits are designed for a specific vehicle and tub configuration. They go in, they fit, they’re done. Simple. The trade off is less flexibility if your needs change down the track. If you know exactly what you need and it’s not going to change, fixed kits are hard to beat for value and ease of installation.
Modular systems let you mix and match components. Add side floors for a flush load surface, bolt on wing panels, swap drawer sizes, add a fridge slide later. ARB’s Outback Solutions range, for example, advertises over 200 possible configurations across their modular lineup. That’s a fundamentally different product philosophy to a bolt in tub drawer kit and it suits builds that evolve over time. Plenty of owners start with a basic drawer setup and add side floors or wing kits six months later when the budget allows.
A common mistake here: buying a fixed kit because it’s cheaper, then wishing you’d gone modular when you want to add a fridge slide or side storage twelve months later. If there’s any chance your setup will evolve, factor that in from the start.
HiLux Fitment Checklist (Don’t Buy Until You Tick These)
This is where people get caught. A drawer system can have perfect reviews and still be wrong for your HiLux if the fitment details don’t line up. We’ve seen blokes order kits online, wait weeks for delivery, then find out it doesn’t fit their tub. Don’t be that person.
Tub Generation and Deck Type
Your HiLux generation matters. An N70 (2004 to 2015) tub is different to an N80 (2015 to 2024) and the new N90 is different again. Many drawer kits are generation specific and some won’t even list which generation they fit unless you dig into the fine print.
Within each generation, you may have an A Deck (higher tub sides, SR5 and above) or a J Deck (lower tub sides, SR and Workmate). Some tub drawer kits are explicitly J Deck only. Getting this wrong means the kit either won’t bolt in at all or will sit at the wrong height, leaving gaps or fouling on the canopy.
Tub Liner and Rail Setup
This catches a lot of buyers. Many drawer kits require you to remove your drop in tub liner because the liner changes the internal tub contours and the drawer frame won’t sit flat or square. This is a common requirement across multiple brands, not just budget options.
ARB specifically notes that tub liners can complicate side floor fitment in their modular systems. Workarounds exist (trimming the liner, partial removal or skipping side floors entirely), but you need to know this before you order. Nobody wants to find out on install day that their $300 tub liner has to come out.
Spray in liners are generally less of an issue since they follow the tub contour, but always double check with the drawer manufacturer.
Canopy Layout Constraints
A few things to measure before buying:
- Door opening vs drawer height. Will your canopy’s rear door clear the drawer unit when open? Some taller drawer systems foul on canopy doors that don’t open high enough. Measure the actual opening, not the spec sheet number.
- Fridge height on top deck. If a fridge or fridge slide sits on top, measure the total stack height (drawer unit + fridge) against your canopy’s internal roof clearance. Leave room for ventilation above the fridge too.
- Wing space. Battery compartments, water tanks and side access panels all compete for the same real estate inside a canopy. Make sure your drawer system leaves room for everything else in your build.
Quick fitment checklist (screenshot this):
- < > Confirmed tub generation (N70, N80 or N90)
- < > Confirmed deck type (A Deck or J Deck)
- < > Checked whether tub liner needs removing or trimming
- < > Measured canopy rear door opening height
- < > Measured internal canopy roof height (for fridge on top clearance)
- < > Checked wing/side panel space for batteries, tanks or other accessories
- < > Confirmed tub tie down point access with drawer frame in place
What to Compare (Features That Actually Matter)
Once fitment is sorted, here’s what separates a good drawer system from a frustrating one. Forget the marketing buzzwords. These are the things that matter day to day.
Load Rating and Runner Design
This is the feature most people check first and fair enough. But load rating alone doesn’t tell the full story. Runner quality is what determines whether those drawers still glide smoothly after two years of corrugated roads and heavy tools.
Cheap runners bind on slopes, wear unevenly and develop play over time. Quality ball bearing runners with anti rollback mechanisms keep drawers locked in position when the ute is parked on an angle. That matters a lot more than people realise until their drawer slides open on a hill and dumps tools everywhere. It only has to happen once and you’ll wish you’d spent the extra money.
Bossco, for example, highlights around 100 kg load rating per drawer plus an anti rollback mechanism in their HiLux kits. Norweld emphasises heavy duty runner design across their drawer range for sustained high load use. Both are good specs, but the way each brand achieves those numbers differs in construction, materials and long term durability.
A common mistake: assuming all “100 kg rated” drawers are equal. The rating number is one thing. How the runners handle that weight over time, on uneven ground, in dusty conditions, is another. If you can, pull the drawers out in person before buying. You’ll feel the difference between quality runners and cheap ones immediately.
Security and Locking
Lock types vary: keyed, slam shut, central lock ready. All have their place. But what matters more than the lock itself is latch alignment and how the mechanism handles flex under load.
A drawer full of heavy tools flexes the frame slightly. If the latch doesn’t account for that, it either won’t close properly or rattles open on rough roads. This is one of those things that cheap drawer kits get wrong and quality ones get right.
For tradies, slam shut latches with a keyed override are the sweet spot. Fast to close on site when you’re in a hurry, secure when you walk away. For touring setups where the drawers stay closed for longer periods, a simple keyed lock is usually enough.
Central lock ready systems integrate with your canopy’s locking, so everything locks with one key or button. Convenient, but adds cost and wiring complexity.
Top Deck Usability
A drawer system with a flat, usable top deck gives you a working surface inside the canopy. You can stage gear on top when packing, slide a fridge across it or use it as a platform for organising camp kits. But not all top decks are created equal.
Look for whether wing panels lift for additional storage access underneath. Aeroklas, for instance, uses lift out side panels and a rated top deck surface, which gives you both a load platform and access to side compartments. That dual purpose design is worth looking at when comparing systems. If a top deck is just a flat surface with no side access, you’re losing a lot of usable space in the wings of your canopy.
Weight and Payload Impact
Drawer systems are heavy. That weight comes directly out of your available payload, so it matters, especially for HiLux owners who are already running a canopy, bull bar and other accessories.
Some systems publish their installed weight. Aeroklas lists around 120 kg for their full unit. DECKED systems come in lighter, around 80 kg for a dual cab setup. The difference between those two numbers is 40 kg of payload you either have or don’t have for actual gear. That’s a full jerry can of water or a decent swag.
If you’re running a canopy, drawers, a fridge, water, recovery gear and tools, payload adds up fast. Check your total against your HiLux’s GVM. Under Australian Design Rules (ADRs) administered by the Department of Infrastructure, exceeding your Gross Vehicle Mass is both a legal issue and a safety concern. The Load Restraint Guide for Light Vehicles (published by the National Transport Commission) also reinforces the importance of securing loads within rated limits, which applies to everything sitting inside and on top of your drawer system.
A common mistake: not counting the drawer system’s own weight in payload calculations. It’s easy to think of drawers as “part of the ute” rather than as payload, but they absolutely count.
Installation and Serviceability
A few practical questions to ask before you commit:
- Bolt in or drilling required? Bolt in kits that use existing tub mounting points are faster to install and easier to reverse. Systems that require drilling into the tub are more permanent, may affect tub warranties and can impact resale.
- Can you still access tub tie down points? Some drawer frames cover the factory tie down hooks. That’s a problem if you ever want to strap something down without the drawer unit in place.
- How easy is it to remove? If you sell the ute or change your setup, can one person pull the drawers out in an hour or is it a two day job? Modular systems generally come apart more easily than fixed weld in units.
- Can you service the runners? Dust, sand and grit get into everything in Australia. If you can clean and re grease the runners without a full disassembly, the system will last years longer.
ARB vs Bossco vs Norweld (HiLux Buyer Comparison)
These three cover different segments of the market. They’re not identical product categories, so comparing them by “best for” makes more sense than a straight spec shootout.
ARB (Outback Solutions Modular Roller Drawers)
Best for: Builds that evolve over time or owners who want maximum configuration options.
ARB’s modular approach is the standout here. You can start with a basic roller drawer kit and add side floors, cargo barriers or wing kits later as your build develops. Their side floor kits create a flush load surface across the tub, which is excellent for touring setups where you want to slide heavy items across rather than lifting them over drawer edges.
Note that tub liners may require trimming or removal to fit side floors properly. ARB flags this in their fitment guides and it’s worth factoring in before you order.
ARB also references crash testing and compliance across their cargo solution range, which is a reassurance factor for buyers who want to know the system has been engineered and tested, not just fabricated. The Vehicle Standards Bulletin 14 (VSB 14) framework covers how modifications should not compromise vehicle safety and ARB’s compliance focus aligns with that.
The trade off with ARB is cost. Modular flexibility means more components and each component adds to the total price. A full ARB setup with side floors, drawers and a fridge slide will cost more than a basic tub drawer kit. But you get a system that can grow with your build.
Bossco (Vehicle Specific Tub Drawer Kit)
Best for: Value focused buyers who want a fitted tub drawer kit without overthinking.
Bossco’s HiLux drawer kits are vehicle specific and designed for straightforward installation. They’re a good option for buyers who know what they need, don’t plan to change their setup regularly and want a solid kit at a competitive price point.
Key specs include around 100 kg load rating per drawer and an anti rollback mechanism to prevent slide out on hills. Those are both solid specs for the price category.
Fitment note: at least one Bossco HiLux listing specifies J Deck only compatibility and their guidance recommends removing the tub liner for proper fitment. Always confirm your deck type and liner status before ordering. Getting this wrong is an expensive and frustrating mistake.
Norweld (Canopy Integrated Heavy Duty Drawer Options)
Best for: Premium builds where drawers are part of a complete canopy ecosystem. Typically touring rigs or high end tradie setups where everything is built together.
Norweld’s approach is different. Their drawers are typically part of a full canopy build, not a standalone aftermarket add on. That means roll out drawers, slide out tables and modular internal mounting points are all designed together as one system. Everything fits because it was built to fit from the start.
Heavy duty construction is the focus, which suits tradies carrying serious weight daily and tourers building a no compromise rig. Norweld promotes their drawer runner design as built for sustained high load use, which is a step above most off the shelf kits.
The trade off is cost and lead time. You’re investing in a complete, purpose built system, not dropping in an off the shelf kit over a weekend. But for buyers who want it done once and done right, with drawers that match the canopy perfectly, it’s hard to beat.
Comparison Table: Best Drawer System by Use Case
| Brand/System | Best For | Strengths | Watch Outs | Who Should Skip |
| ARB Outback Solutions | Evolving builds, touring | Modular, 200+ configs, crash tested, side floors | Side floors may need liner removal, higher total cost | Buyers wanting a simple one and done kit on a budget |
| Bossco | Budget friendly fitted kit | Vehicle specific, 100 kg/drawer, anti rollback | J Deck only on some kits, liner removal required | Heavy duty commercial users needing premium runners |
| Norweld | Premium integrated builds | Part of full canopy system, heavy duty runners, slide out tables | Higher cost, longer lead time, not a DIY install | Budget buyers or DIY installers wanting a weekend project |
Other Strong Options (Quick Mentions)
The three above aren’t the only game in town. Depending on your priorities, these are worth a look.
- DECKED: Weatherproof tub organisation system with a lower installed weight (~80 kg for dual cab). Good for mixed use owners who want flexibility without a permanent fit out. The design lets you use the top as a load floor while keeping drawers accessible underneath. Check compatibility notes for your specific HiLux generation.
- MSA: Double drawer kits that often specify A Deck only fitment on certain HiLux generations and recommend removing drop in liners. Solid option if your tub matches the fitment requirements.
- Aeroklas / UniUte: Worth comparing for feature sets like lift out side panels, rated top decks and integrated wing storage. Don’t just compare brands. Compare what each system actually gives you for your specific canopy layout.
Pricing and Value (How Not to Overpay)
Drawer system pricing swings wildly and the reasons aren’t always obvious.
The main cost drivers are materials (steel vs aluminium), runner quality, lock type, wing panels or side floors (if included) and installation complexity. A basic bolt in steel drawer kit might come in under $1,500 installed. A full modular aluminium system with side floors, wings and a fridge slide can push well past $4,000.
The value rule: pay for runner quality and daily usability first. Accessories and add ons second. A cheaper system with quality ball bearing runners and a solid latch will outperform an expensive system with flashy features and average runners every single time. Runners are the thing you interact with every day, so that’s where your money should go.
Don’t forget freight and installation costs. Heavier systems cost more to ship (some drawer kits weigh 80 to 120+ kg in the box) and complex installs that require drilling, shimming or wiring add labour time. Factor those into your budget before comparing sticker prices. A $1,200 kit that costs $400 to install and $150 to ship isn’t really cheaper than a $1,600 kit with free fitting.
What We Recommend at Oz Canopies & 4×4
For most HiLux owners, the right drawer system depends on whether you need a simple fitted solution or a build that grows with you. We see both types walk through our showroom every week.
The key thing is getting the fitment right first. Tub generation, deck type, liner situation, canopy clearances. Get those sorted and the rest of the decision becomes much easier. Too many blokes skip the fitment check and end up returning kits or living with a setup that doesn’t quite work.
If you’re not sure which direction to go, bring your ute in or give us a call on 02 9627 8666. We’ll check your tub type, measure your canopy clearances and help you match a drawer system to your actual setup. Not just what looks good online.
FAQs
Will drawers fit under any HiLux canopy?
Do I need to remove my tub liner?
What drawer height works best for fridge on top setups?
Are tub drawers better than a canopy “service body” fit out?
Can I install drawers myself?
How much payload do drawers typically consume?
Do drawers affect my insurance?
Your Next Step
The “best” drawer system is the one that fits your tub, clears your canopy, matches how you actually use your ute and leaves you enough payload for the gear that goes inside it. Start with the fitment checklist above, decide whether you need fixed or modular, then compare runner quality and usability features before brand names.
Ready to sort your canopy storage? Check out our full Toyota Hilux Canopy Setup Guide for the complete picture on storage solutions, camping setups and weight management. Or browse our HiLux canopy range to find a canopy rated for your build.
Need hands on advice? Call us on 02 9627 8666, text 0440 130 098 or visit us at 20 Walker St, South Windsor.