{"title":"Mitsubishi Ute and 4x4 Accessories","description":"\u003ch2\u003eTriton First\u003c\/h2\u003e\n\u003cp\u003eThe Triton is the heart of this page, and the \u003ca href=\"\/collections\/mitsubishi-triton-accessories\"\u003eMitsubishi Triton accessories\u003c\/a\u003e hub sorts every Triton part by generation. Five generations are covered across the range: the ML from 2006 to 2009, the MN from 2009 to 2015, the MQ from 2015, the MR from 2019 to early 2024, and the MV from 2024. The MQ and MR share most tub parts, which is why many listings name both, but the MV is a new ute with a different tub, front end and electronics, so its parts are listed separately. Older ML and MN Tritons are mostly served by towbars, wiring, wheels and tyres rather than tub covers. The compliance plate settles the generation if the badge leaves you unsure.\u003c\/p\u003e\n\u003ch2\u003eWhat the Triton Range Covers\u003c\/h2\u003e\n\u003cp\u003eFor the MQ, MR and MV, you will find canopies in steel, aluminium and fibreglass, electric and manual roller shutters, hard lids, fender flares, side steps, nudge bars, bull bars, sports bars and TAG towbars. Tub and tailgate parts include central locking kits, dust seals, tub liners and slides. Pet friendly steel sliding windows for our MQ and MR steel canopy are listed separately for each side. Most of these parts are listed for the double cab, so single and club cab owners should check the cab type in each title. If you are building a work ute or a tourer from scratch, the hub's order of work is the place to start, because the tub cover you choose decides the sports bar, roof and load bar options that follow.\u003c\/p\u003e\n\u003ch2\u003eChoosing by Use\u003c\/h2\u003e\n\u003cp\u003eA Triton that works on site usually starts with a canopy or roller shutter, a towbar and a tub liner. A touring Triton leans toward an aluminium canopy or a shutter with load bars, a roof platform and recovery gear, with the heavy items kept low. A family Triton often needs only a tub cover, side steps and a nudge bar. Whatever the use, add up the weight of every part against the payload in your owner's manual before you order.\u003c\/p\u003e\n\u003ch2\u003eThe Triton and the New Navara\u003c\/h2\u003e\n\u003cp\u003eThe D27 Navara released in 2026 is built on the same platform as the Triton MV, and some MV listings now appear on Nissan pages as a result. That does not mean every MV part suits the D27. Read each listing to confirm it names your vehicle, and see the \u003ca href=\"\/collections\/nissan-navara-d27-accessories\"\u003eNissan Navara D27 accessories\u003c\/a\u003e hub for parts made for the Navara itself.\u003c\/p\u003e\n\u003ch2\u003eTowing With an MV Triton\u003c\/h2\u003e\n\u003cp\u003eThe MV has the widest towbar choice of any Triton here. TAG makes heavy duty bars for the styleside tub with and without the rear bumper step, a 4x4 Recovery bar for the cab chassis and an Extreme Recovery bar for the styleside ute. BTA and Oz Canopies \u0026amp; 4x4 add heavy duty bars that suit either the tub body or a tray back. Choose by body first, then by the work the bar will do, and remember that recovery points are for recovery: never snatch from a tow ball.\u003c\/p\u003e\n\u003ch2\u003ePajero Sport Protection and Towing\u003c\/h2\u003e\n\u003cp\u003eThe Pajero Sport has a small range of its own on this page:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNudge bars:\u003c\/strong\u003e sensor compatible bars in chrome or matte black for the QF from 2020 to 04\/2024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonnet protector:\u003c\/strong\u003e a guard for the QF from 2020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonnet scoop:\u003c\/strong\u003e a matte black styling piece for the QF from 2020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTowbars:\u003c\/strong\u003e TAG heavy duty bars for 2015 to 2019 and from 2019, with a Plug N Play loom from 08\/2015\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePajero owners will also find a TAG heavy duty towbar covering 2000 to 2023 and a plug in loom from 2006.\u003c\/p\u003e\n\u003ch2\u003eTowbars for Outlander, ASX, Challenger and Lancer\u003c\/h2\u003e\n\u003cp\u003eTAG towbars are listed for the Outlander from 2006 to 2012 and 2012 to 2021, with a BTA heavy duty towbar for the current Outlander from 08\/2021. The ASX has a heavy duty bar from 2010 and a standard duty bar from 2020, the Challenger a heavy duty bar from 2008, and the Lancer a standard duty bar for 2011 to 2018. Plug N Play looms with ECU modules are listed for the ASX, Lancer CJ, both Outlander generations and the Pajero. Browse everything in \u003ca href=\"\/collections\/towbars\"\u003etowbars\u003c\/a\u003e and \u003ca href=\"\/collections\/trailer-wiring-harnesses\"\u003etrailer wiring harnesses\u003c\/a\u003e, and keep any trailer within the towing limit in your owner's manual.\u003c\/p\u003e\n\u003ch2\u003eUniversal Gear\u003c\/h2\u003e\n\u003cp\u003eSome listings on this page are universal rather than Mitsubishi parts: tray canopies in flat plate aluminium, a gullwing canopy, RCS retractable canopies, tool boxes, ladder racks, tow ball mounts, clamp on roof bars, a sports bar with a basket carrier and rooftop tents. Each is sold by size, so compare its dimensions with your Triton's tray or tub. See \u003ca href=\"\/collections\/tub-and-ladder-racks\"\u003etub and ladder racks\u003c\/a\u003e and \u003ca href=\"\/collections\/towbar-mounts-and-hitch-accessories\"\u003etowbar mounts and hitch accessories\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWheels and Tyres\u003c\/h2\u003e\n\u003cp\u003eKING wheels and Grenlander and Hilo tyres are listed for every Triton generation here, from 16 inch rims for older utes to 20 inch rims for the MV, with the stud pattern and offset on each listing. Every Triton generation uses the 6\/139.7 stud pattern, which keeps the choice wide, but some MR listings are limited to particular grades, so check the grade note. Fitting wheels and tyres is a job for your tyre shop, since we sell them supply only and send them Australia wide.\u003c\/p\u003e\n\u003ch2\u003eBrands\u003c\/h2\u003e\n\u003cp\u003eMitsubishi parts here come from HSP, EGR, TAG, BTA, RockArmor, Hamer, ProRack, Yakima and RCS, plus KING wheels, tyres from Grenlander and Hilo, and canopies, shutters and tub gear made under our own Oz Canopies \u0026amp; 4x4 name. The same brand can appear across several generations, so filter by model and year rather than by maker, and read the build dates in each title.\u003c\/p\u003e\n\u003ch2\u003eFitting and Delivery\u003c\/h2\u003e\n\u003cp\u003eTriton canopies, shutters, bars, towbars and tub gear can be fitted at our South Windsor showroom, part of our expert fitting in NSW, or shipped Australia wide if you have your own installer or live outside NSW. Afterpay and Zip are on offer, and we have been family owned and fitting utes since 1998. Call us on 02 9627 8666, text 0440 130 098, or visit our showroom at 20 Walker Street, South Windsor NSW 2756.\u003c\/p\u003e","products":[{"product_id":"ub420oz1","title":"Square Aluminium Tool Box 420x420x200","description":"\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand new HEAVY DUTY Checker plate Aluminium under tray toolbox\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e420mm Length 420mm Height 200mm Width\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1.6mm thick\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e1060# grade polished aluminium\u003c\/li\u003e\n\u003cli\u003eWeather proof rubber seals\u003c\/li\u003e\n\u003cli\u003eHeavy duty T locks, with a pair of keys\u003c\/li\u003e\n\u003cli\u003eStainless steel piano hinges\u003c\/li\u003e\n\u003cli\u003eFully welded seams\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266774765825,"sku":"420-TOOLBOX","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/12-1.jpg?v=1788353973"},{"product_id":"oz-mqroll","title":"Mitsubishi Triton MQ MR Manual Roller Shutter Cover Tonneau Hard Lid 2015 to 01\/2024","description":"\u003cp\u003eThe Oz manual roller shutter for the Mitsubishi Triton MQ and MR dual cab (2015 to 01\/2024) is a lightweight aluminium cover that keeps gear secure and dry. It suits utes with no sports bar, and fits a factory sports bar with a special adapter kit. When open, you can reach the tub from all three sides with no load height limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong yet lightweight: a matte black powder coated aluminium curtain.\u003c\/li\u003e\n\u003cli\u003eInterlocking aluminium slats: built to resist knife slash attacks.\u003c\/li\u003e\n\u003cli\u003eWeather protection: a stainless steel roller housing and four hose drain system help keep gear dry.\u003c\/li\u003e\n\u003cli\u003eMultiple lock positions: fully open, half open and more, with two keys supplied.\u003c\/li\u003e\n\u003cli\u003eEasy to use: adjustable heavy duty spring retraction and an integrated pull strap.\u003c\/li\u003e\n\u003cli\u003eAccessory ready: full length side channels, rated to 100 kg dynamic and 200 kg static, accept sports bars, cross bars, tub racks and ladder racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits all Mitsubishi Triton MQ and MR dual cab variants from 2015 to 01\/2024, including GLX, GLX-R, GLX+, GLS, GLS Premium, Exceed and GSR. Only available for dual cab models.\u003c\/li\u003e\n\u003cli\u003eGot a factory sports bar? It fits with a special adapter kit, sold separately.\u003c\/li\u003e\n\u003cli\u003eThe Triton has no factory barrel lock on the tailgate, so we recommend adding a tailgate central locking kit (sold separately).\u003c\/li\u003e\n\u003cli\u003eBacked by a 24 month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266774995201,"sku":"MITSUBISHI-TRITON-MQMR-ROLLER-M","price":1249.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Untitled-design-2-scaled.jpg?v=1788353992"},{"product_id":"heavy-duty-aluminium-canopy-gullwing-ute-truck-trailer-tool-box-dual-cab-18001800860","title":"Heavy Duty Flat Plate Aluminium Ute Canopy Dual Cab 1800 X 1775 X 850 Black","description":"\u003cp\u003eAdd secure, lockable storage to your dual cab tray back ute, truck or trailer with this 1800 mm heavy duty aluminium flat plate canopy in black. It measures 1800 mm long, 1775 mm wide and 850 mm high, and is framed through the roof, floor, sides and doors as standard for strength and less flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty body: built from 2.5 mm aluminium flat plate.\u003c\/li\u003e\n\u003cli\u003eFramed as standard: a frame under the roof supports carrying capacity, while frames in the sides, doors and floor add strength and reduce flex.\u003c\/li\u003e\n\u003cli\u003eEight point locking: four heavy duty whale tail locks work with locking rods in the doors.\u003c\/li\u003e\n\u003cli\u003eEasy access: two doors on gas struts, hung on full stainless steel piano hinges.\u003c\/li\u003e\n\u003cli\u003eWeather sealing: rubber seals on all doors help keep the weather out.\u003c\/li\u003e\n\u003cli\u003eLadder rack ready: optional easy fit ladder racks take the overall height to 950 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSized for dual cab trays: the body is 1800 mm long and 1775 mm wide, so measure your tray, truck or trailer deck before ordering.\u003c\/li\u003e\n\u003cli\u003eFinished in black and supplied fully assembled, weighing 220 kg.\u003c\/li\u003e\n\u003cli\u003eSupplied with a bare roof as standard. Ladder racks are available as an add on.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003cli\u003eBacked by a 12 month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266775290113,"sku":"1800-FLATPLATE-BLACK","price":2699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1800-aluminium-canopy-black.jpg?v=1788354029"},{"product_id":"heavy-duty-aluminium-canopy-gullwing-ute-truck-trailer-tool-box-single-cab-2400mm","title":"Heavy Duty Aluminium Canopy Gullwing Ute Truck Trailer Toolbox Single Cab 2400 x 1775 x 850 mm","description":"\u003cp\u003eTurn a single cab tray, truck or trailer into secure, lockable storage with this 2400 mm gullwing style canopy from Oz Canopies \u0026amp; 4x4. Built from 2.5 mm aluminium flat plate and measuring 2400 mm long, 1775 mm wide and 850 mm high, it is framed through the roof, floor, sides and doors as standard for strength and less flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty body: built from 2.5 mm aluminium flat plate.\u003c\/li\u003e\n\u003cli\u003eFramed as standard: a frame under the roof supports carrying capacity, while frames in the sides, doors and floor add strength and reduce flex.\u003c\/li\u003e\n\u003cli\u003eEight point locking: four heavy duty whale tail locks work with locking rods in the doors.\u003c\/li\u003e\n\u003cli\u003eEasy access: two doors on gas struts, hung on full stainless steel piano hinges.\u003c\/li\u003e\n\u003cli\u003eWeather sealing: rubber seals on all doors help keep the weather out.\u003c\/li\u003e\n\u003cli\u003eLadder rack ready: optional easy fit ladder racks take the overall height to 950 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSized for single cab trays: the body is 2400 mm long and 1775 mm wide, so measure your tray, truck or trailer deck before ordering.\u003c\/li\u003e\n\u003cli\u003eRaw aluminium finish, supplied fully assembled and weighing 295 kg.\u003c\/li\u003e\n\u003cli\u003eSupplied with a bare roof as standard. Ladder racks are an optional extra.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003cli\u003eBacked by a 12 month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266775322881,"sku":"2400-FLATPLATE-RAW","price":3399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1.1-scaled_38ee120a-f645-448c-9356-e9c71ea1f444.jpg?v=1788354030"},{"product_id":"mitsubishi-triton-mq-mr-dual-cab-2015-current-tub-liner-bed-liner","title":"Mitsubishi Triton MQ MR Dual Cab 2015 to 2024 Tub Liner Bed Liner","description":"\u003cp\u003eBRAND NEW UTE LINER TO SUIT ALL Mitsubishi Triton MQ MR Dual Cab 2015 - 2024 MODELS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete brand new Tub and Tailgate \u003cstrong\u003eUnder Rail\u003c\/strong\u003e Ute Liner\u003c\/li\u003e\n\u003cli\u003eOZ premium Ute liner will protect your vehicle tub from damage and scratches\u003c\/li\u003e\n\u003cli\u003eUsing a OZ Ute Liner will significantly increase your vehicles resale value by minimising damage to your tub. Pays for itself down the line!\u003c\/li\u003e\n\u003cli\u003eAn integrated gutter channel directs water to the rear tailgate area, where it can easily drain away\u003c\/li\u003e\n\u003cli\u003eDesigned for super simple installation\u003c\/li\u003e\n\u003cli\u003eVehicle tie-down points retained!\u003c\/li\u003e\n\u003cli\u003eContoured design maximises tub space\u003c\/li\u003e\n\u003cli\u003eStrong and durable with class leading 4mm thickness. As heavy duty as it gets!\u003c\/li\u003e\n\u003cli\u003eExtruded from tough polyethylene. UV stable. Will not fade to white like other inferior brands\u003c\/li\u003e\n\u003cli\u003eProtection from most common chemicals – oil, petrol, paint, battery acid\u003c\/li\u003e\n\u003cli\u003eHigh impact resistance\u003c\/li\u003e\n\u003cli\u003eTub and Tailgate pieces\u003c\/li\u003e\n\u003cli\u003eNo Drill installation\u003c\/li\u003e\n\u003cli\u003e100% Test fitted\u003c\/li\u003e\n\u003cli\u003eOZ Ute liners are compatible with any type of Ute lid, OE sport bar and canopy\u003c\/li\u003e\n\u003cli\u003ePLEASE NOTE: Photos are for ILLUSTRATION PURPOSES ONLY\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266778042625,"sku":"MITSUBISHI-TRITON-MQMR-TUB-LINER","price":390.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Untitled-design-scaled_130b5512-eaa2-4f9a-ba8d-37902a6317a1.jpg?v=1788354086"},{"product_id":"mitsubishi-triton-mq-mr-club-cab-extra-cab-canopy-2015-current-lift-up-sliding-side-windows-central-locking","title":"Mitsubishi Triton MQ MR Club Cab Extra Cab Canopy 2015 to 01\/2024 Lift Up or Sliding Side Windows Central Locking","description":"\u003cp\u003eAdd lockable storage to your Mitsubishi Triton MQ or MR Club Cab from 2015 to 01\/2024 with this fibreglass canopy from Oz Canopies \u0026amp; 4x4. The vinylester resin shell is built for extra strength. Lift up side windows and central locking on the rear door keep your gear handy and secure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible side access: lift up side windows on both sides as standard, with sliding side windows available as an optional extra to mix and match.\u003c\/li\u003e\n\u003cli\u003eQuality glass: tinted, E mark tempered automotive glass and a clear front sliding window.\u003c\/li\u003e\n\u003cli\u003eCentral locking: standard on the rear door, with one key for the door and side windows.\u003c\/li\u003e\n\u003cli\u003eRack ready roof: Australian custom designed ceiling reinforcements support heavy duty racks or crossbars, and the roof is rated to 100 kg dynamic and 200 kg static.\u003c\/li\u003e\n\u003cli\u003eFinished interior: full vinyl lining, LED interior light and high level LED brake light.\u003c\/li\u003e\n\u003cli\u003eSecure fit: an inlaid heavy duty aluminium rail and rust resistant stainless steel clamps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits all Mitsubishi Triton MQ and MR Club Cab models from 2015 to 01\/2024, including GLX, GLS and Exceed, 4x4 and 4x2, petrol and diesel.\u003c\/li\u003e\n\u003cli\u003eWhite as standard. Colour coded canopies are painted to your paint code and may not match 100%.\u003c\/li\u003e\n\u003cli\u003e3 year warranty on the fibreglass shell and 12 months on hardware, moving parts and paint. Extended warranty available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266793083137,"sku":"MITSUBISHI-TRITON-MQMR-EC-F-CANOPY","price":3499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Untitled-design_18852a98-abab-4992-b48a-a6b49b5e8ef0.jpg?v=1788354383"},{"product_id":"original-sports-bar-adapter-kit","title":"Original Sports Bar Adaptor Kit","description":"\u003cp\u003eThis sports bar adaptor kit lets you refit your factory (OEM) sports bar, or one of our aftermarket sports bars, on any Oz Canopies \u0026amp; 4x4 branded roller shutter. It suits Oz Canopies \u0026amp; 4x4 roller shutters only and is not compatible with the other roller shutter brands we supply, such as EGR and HSP. The adaptor kit you receive varies with your vehicle make and model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep your sports bar: refit your factory sports bar or one of our aftermarket sports bars with your roller shutter.\u003c\/li\u003e\n\u003cli\u003eMade for Oz Canopies \u0026amp; 4x4 roller shutters: suits any Oz Canopies \u0026amp; 4x4 branded roller shutter.\u003c\/li\u003e\n\u003cli\u003eMatched to your vehicle: the adaptor kit you receive varies by make and model.\u003c\/li\u003e\n\u003cli\u003eComplete hardware: comes with all the nuts and bolts required to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits Oz Canopies \u0026amp; 4x4 branded roller shutters only. Not compatible with EGR, HSP or other branded roller shutters we supply.\u003c\/li\u003e\n\u003cli\u003eRefits your factory (OEM) sports bar or one of our aftermarket sports bars.\u003c\/li\u003e\n\u003cli\u003eThe adaptor kit you receive will vary based on your make and model. All required nuts and bolts are included.\u003c\/li\u003e\n\u003cli\u003eComes with a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266798620929,"sku":"SPORTSADAPTER","price":190.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/adaptor1-scaled.jpg?v=1788354484"},{"product_id":"cross-bars-roof-racks-pair","title":"Cross Bars Roof Racks Pair Suit Roller Shutter\/Hard Lid","description":"\u003cp\u003eThis pair of black metal cross bars (roof racks) is designed to suit our roller shutters and hard lids, and will also suit most track fittings. The 1620 mm bars give you a 157 cm wide load area for ladders, kayaks and other gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair: two cross bars with a fitting kit.\u003c\/li\u003e\n\u003cli\u003e1620 mm metal bars: black metal bars, each 1620 mm long.\u003c\/li\u003e\n\u003cli\u003e157 cm load area: a 157 cm wide load area for your gear.\u003c\/li\u003e\n\u003cli\u003eTrack fitting: designed for our roller shutters and suits most track fittings.\u003c\/li\u003e\n\u003cli\u003eLoad rating: the pair is rated to 100 kg dynamic and 200 kg static (evenly distributed load).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to suit our roller shutters and hard lids, and will also suit most track fittings.\u003c\/li\u003e\n\u003cli\u003eCovered by a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266798915841,"sku":"CROSS-BARS-ROLLER","price":490.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/roller-shutter-crossbars-1.jpg?v=1788354492"},{"product_id":"single-cross-bar-roof-rack","title":"Single Cross Bar Roof Rack Suit Roller Shutter\/Hard Lid","description":"\u003cp\u003eThis single black metal cross bar (one bar, not a pair) is designed to suit our roller shutters, and it will also suit most track fittings. The 1620 mm bar gives a 157 cm wide load area for ladders, kayaks and other gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle bar: this listing is for one cross bar, supplied with a fitting kit.\u003c\/li\u003e\n\u003cli\u003eBlack metal bar: a metal bar in black, 1620 mm long.\u003c\/li\u003e\n\u003cli\u003e157 cm load area: a 157 cm wide load area for your gear.\u003c\/li\u003e\n\u003cli\u003eTrack fitting: designed for our roller shutters and suits most track fittings.\u003c\/li\u003e\n\u003cli\u003eLoad rating: a pair of these cross bars is rated to 100 kg dynamic and 200 kg static (evenly distributed load).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to suit our roller shutters and will also suit most track fittings.\u003c\/li\u003e\n\u003cli\u003eCovered by a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266798948609,"sku":"CROSS-BARS-ROLLER-1PCE","price":349.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/roller-shutter-crossbars-1_86dc64be-2182-49a9-962e-732291cc66b6.jpg?v=1788354493"},{"product_id":"ladder-racks-pair","title":"Ladder Racks Pair","description":"\u003cp\u003eThis pair of heavy duty ladder racks is designed to suit our roller shutters and will also suit most track fittings. Made from 3 inch steel pipe with a matte powder coated finish, the racks give you a 1510 mm wide load carrying area for ladders and other long gear. The pair is rated to 100 kg dynamic and 200 kg static on our roller shutters, or 200 kg dynamic and 300 kg static when used standalone. A connecting bar is included for additional strength and is optional to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair: two ladder racks, with a connecting bar included for additional strength.\u003c\/li\u003e\n\u003cli\u003eLoad rated: 100 kg dynamic and 200 kg static for the pair on our roller shutters, or 200 kg dynamic and 300 kg static when used standalone.\u003c\/li\u003e\n\u003cli\u003eHeavy duty steel: 3 inch steel pipe with a matte powder coated finish.\u003c\/li\u003e\n\u003cli\u003eAdjustable height: set the rack height to suit your load.\u003c\/li\u003e\n\u003cli\u003eWide load area: a 1510 mm wide load carrying area.\u003c\/li\u003e\n\u003cli\u003eTie down points: integrated tie down points help you secure your load.\u003c\/li\u003e\n\u003cli\u003eReinforced feet: additional angle brackets are fitted to each foot for extra strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to suit our roller shutters and will also suit most track fittings.\u003c\/li\u003e\n\u003cli\u003eThis listing is for a pair of ladder racks. The connecting bar is included and is optional to fit. It is not needed for fitment or to reach the full load rating.\u003c\/li\u003e\n\u003cli\u003eCovered by a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266798981377,"sku":"LADDER-RACK-ROLLER-SHUTTER","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/IMG_2526-scaled.jpg?v=1788354490"},{"product_id":"single-ladder-rack","title":"Single Ladder Rack","description":"\u003cp\u003eThis single heavy duty ladder rack (one rack, not a pair) is designed to suit our roller shutters and will also suit most track fittings. Made from 3 inch steel pipe with a matte powder coated finish, it gives you a 1510 mm wide load carrying area with adjustable height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle rack: one heavy duty ladder rack for your roller shutter or track fittings.\u003c\/li\u003e\n\u003cli\u003eHeavy duty steel: 3 inch steel pipe with a matte powder coated finish.\u003c\/li\u003e\n\u003cli\u003eAdjustable height: set the rack height to suit your load.\u003c\/li\u003e\n\u003cli\u003eWide load area: a 1510 mm wide load carrying area.\u003c\/li\u003e\n\u003cli\u003eTie down points: integrated tie down points help you secure your load.\u003c\/li\u003e\n\u003cli\u003eReinforced feet: additional angle brackets are fitted to each foot for extra strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to suit our roller shutters and will also suit most track fittings.\u003c\/li\u003e\n\u003cli\u003eThis listing is for one ladder rack only.\u003c\/li\u003e\n\u003cli\u003eCovered by a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266800062721,"sku":"LADDER-RACK-ROLLER-SHUTTER-1PCE","price":359.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/IMG_2425-scaled.jpg?v=1788354498"},{"product_id":"square-aluminium-tool-box-520x420x200","title":"Square Aluminium Tool Box 520x420x200","description":"\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand new HEAVY DUTY Checker plate Aluminium under tray toolbox\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e520mm Length 420mm Height 200mm Width\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e1060# grade polished aluminium\u003c\/li\u003e\n\u003cli\u003eWeather proof rubber seals\u003c\/li\u003e\n\u003cli\u003eHeavy duty T locks, with a pair of keys\u003c\/li\u003e\n\u003cli\u003eStainless steel piano hinges\u003c\/li\u003e\n\u003cli\u003eFully welded seams\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266801209601,"sku":"520-TOOLBOX","price":159.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/14.jpg?v=1788354511"},{"product_id":"under-tray-tool-box-trundle-drawer-1500mm-ute-roller-drawer-dual-cab","title":"Under Tray Tool Box Trundle Drawer 1500mm Ute Roller Drawer Dual Cab","description":"\u003cp\u003eIntroducing the new OZ 4x4 Under tray Trundle drawer!\u003c\/p\u003e\n\u003cp\u003eIt is the finest addition to any workman's inventory. It offers more storage and offers secure and safe protection for tools, equipment and small sizes items.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 3 sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003cli\u003e1700mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003cli\u003e2100mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstructed with galvanised steel plating and a brushed aluminium face plate\u003c\/p\u003e\n\u003cp\u003eSingle chrome T-lock with key lock barrel with triple 'lock' system. Additional rods are present on either side of the lock to ensure that when locked, shifting weight or additional prying will not open the drawer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic capped lock barrel to protect against weather\u003c\/li\u003e\n\u003cli\u003eUndertray drawer is capable of carrying up to 150kg of evenly distributed load\u003c\/li\u003e\n\u003cli\u003eOffers secure and safe protection for your tools and small items\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant\u003c\/li\u003e\n\u003cli\u003e2 x Keys Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou require a minimum clearance of 180mm between the underside of the tray and the top of the chassis. There should be no obstacles in this space between the chassis runners x the length of the tray x the 180mm in height.\u003c\/p\u003e\n\u003cp\u003eUnique 'Triple locking' system which incorporates the main T-lock with 2 locking rods to increase security and minimise the impact of shifting loads\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266801242369,"sku":"1500-TRUNDLE","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/9-scaled_18572149-689b-41d0-8d73-3768fdfe6ad0.jpg?v=1788354514"},{"product_id":"under-tray-tool-box-trundle-drawer-1700mm-ute-roller-drawer-extra-cab","title":"Under Tray Tool Box Trundle Drawer 1700mm Ute Roller Drawer Extra Cab","description":"\u003cp\u003eIntroducing the new OZ 4x4 Under tray Trundle drawer!\u003c\/p\u003e\n\u003cp\u003eIt is the finest addition to any workman's inventory. It offers more storage and offers secure and safe protection for tools, equipment and small sizes items.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 3 sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003cli\u003e1700mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003cli\u003e2100mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstructed with galvanised steel plating and a brushed aluminium face plate\u003c\/p\u003e\n\u003cp\u003eSingle chrome T-lock with key lock barrel with triple 'lock' system. Additional rods are present on either side of the lock to ensure that when locked, shifting weight or additional prying will not open the drawer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic capped lock barrel to protect against weather\u003c\/li\u003e\n\u003cli\u003eUndertray drawer is capable of carrying up to 150kg of evenly distributed load\u003c\/li\u003e\n\u003cli\u003eOffers secure and safe protection for your tools and small items\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant\u003c\/li\u003e\n\u003cli\u003e2 x Keys Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou require a minimum clearance of 180mm between the underside of the tray and the top of the chassis. There should be no obstacles in this space between the chassis runners x the length of the tray x the 180mm in height.\u003c\/p\u003e\n\u003cp\u003eUnique 'Triple locking' system which incorporates the main T-lock with 2 locking rods to increase security and minimise the impact of shifting loads\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266801438977,"sku":"1700-TRUNDLE","price":649.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/9-scaled_a0de7a8c-4a9f-4e9a-9ea0-fd850f0ac5ce.jpg?v=1788354517"},{"product_id":"under-tray-tool-box-trundle-drawer-2100mm-ute-roller-drawer-single-cab","title":"Under Tray Tool Box Trundle Drawer 2100mm Ute Roller Drawer Single Cab","description":"\u003cp\u003eIntroducing the new OZ 4x4 Under tray Trundle drawer!\u003c\/p\u003e\n\u003cp\u003eIt is the finest addition to any workman's inventory. It offers more storage and offers secure and safe protection for tools, equipment and small sizes items.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 3 sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003cli\u003e1700mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003cli\u003e2100mm long x 750mm wide x 170mm high\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstructed with galvanised steel plating and a brushed aluminium face plate\u003c\/p\u003e\n\u003cp\u003eSingle chrome T-lock with key lock barrel with triple 'lock' system. Additional rods are present on either side of the lock to ensure that when locked, shifting weight or additional prying will not open the drawer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic capped lock barrel to protect against weather\u003c\/li\u003e\n\u003cli\u003eUndertray drawer is capable of carrying up to 150kg of evenly distributed load\u003c\/li\u003e\n\u003cli\u003eOffers secure and safe protection for your tools and small items\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant\u003c\/li\u003e\n\u003cli\u003e2 x Keys Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou require a minimum clearance of 180mm between the underside of the tray and the top of the chassis. There should be no obstacles in this space between the chassis runners x the length of the tray x the 180mm in height.\u003c\/p\u003e\n\u003cp\u003eUnique 'Triple locking' system which incorporates the main T-lock with 2 locking rods to increase security and minimise the impact of shifting loads\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266801471745,"sku":"2100-TRUNDLE","price":749.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/9-scaled_a328fe6b-22ec-4497-bbee-349ae4f143ec.jpg?v=1788354517"},{"product_id":"mitsubishi-triton-mq-mr-dual-cab-canopy-2015-current-lift-up-sliding-side-windows-central-locking-fastback","title":"Mitsubishi Triton MQ MR Dual Cab Canopy 2015 to 01\/2024 Lift Up or Sliding Side Windows Central Locking","description":"\u003cp\u003eTurn the tub of your Mitsubishi Triton MQ or MR dual cab into secure storage with this fibreglass canopy, made with vinylester resin for extra strength. Lift up side windows and a lift up rear door give easy access, with sliding side windows available as an optional extra to mix and match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCentral locking: standard on the rear door, with one key for the door and side windows plus spare keys.\u003c\/li\u003e\n\u003cli\u003eRoof ready: Australian custom designed reinforcements moulded into the ceiling support heavy duty roof racks or crossbars, and the roof is rated to 100 kg dynamic and 200 kg static.\u003c\/li\u003e\n\u003cli\u003eFront sliding window: makes cleaning your ute's rear window easy.\u003c\/li\u003e\n\u003cli\u003eFinished inside: full vinyl lining, an LED interior light and a high level LED brake light.\u003c\/li\u003e\n\u003cli\u003eSecure fit: a rust resistant stainless steel clamp kit and inlaid aluminium rail give a strong, flex free mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits all dual cab Mitsubishi Triton MQ and MR GLX, GLS and Exceed models from 2015 to 01\/2024, 4x4 and 4x2, petrol and DI-D diesel.\u003c\/li\u003e\n\u003cli\u003eWhite as standard, or colour coded to your paint code at extra cost (may not match the vehicle colour 100%).\u003c\/li\u003e\n\u003cli\u003e3 year warranty on the fibreglass shell, 12 months on hardware, moving parts and paint.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266803273985,"sku":"MITSUBISHI-TRITON-MQMR-DC-F-CANOPY","price":3499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/15.jpg?v=1788354531"},{"product_id":"universal-tub-slide-bed-slide-pull-out-floor-1400mm-x-1000mm","title":"Universal Tub Slide Bed Slide Pull Out Floor 1400MM X 1000MM","description":"\u003cp\u003eThis is the perfect solution for never having to reach into the back of the Tub again!\u003cbr\u003e \u003cstrong\u003eLength 1400mm X Width 1200mm (\u003c\/strong\u003e\u003cstrong\u003eMake sure to measure your tub to ensure fit!) The tub slide sits 160mm from the base of the tub to to the highest point on the slide tray edges. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty ball bearings\u003c\/li\u003e\n\u003cli\u003eDraw extends \/ slides out 900mm\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation with a few securing bolts and limited tools such as a drill and wrench\u003c\/li\u003e\n\u003cli\u003eCompatible with all bed\/tub liners\u003c\/li\u003e\n\u003cli\u003eSpring-loaded latch pins allow you to position the tray into multiple positions\u003c\/li\u003e\n\u003cli\u003eSoft touch grab handle with push button release\u003c\/li\u003e\n\u003cli\u003e6 integrated tie down points\u003c\/li\u003e\n\u003cli\u003eLoad rated to \u003cstrong\u003e350kg\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal fitting, can fit a majority of utes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266804519169,"sku":"TUB-SLIDE","price":695.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-scaled_0efb2e06-202c-4471-9220-bcb1dba78118.jpg?v=1788354552"},{"product_id":"mitsubishi-triton-mr-2019-to-current-sensor-compatible-adr-approved-bull-bar","title":"Mitsubishi Triton MR 2019 to Current Sensor Compatible ADR Approved Bull Bar Bullbar","description":"\u003ch1\u003e\u003cstrong\u003eCLEARANCE SALE\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003ch3\u003eOUR BIGGEST DEAL YET\u003c\/h3\u003e\n\u003ch3\u003e$2,500 SUPPLY\u003cbr\u003eONLY $800 FITMENT to standard front bumper\u003c\/h3\u003e\n\u003ch4\u003eLimited stock • Limited time • Exceptional value\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eOz canopies \u0026amp; 4x4 Accessories is proud to introduce the HAMER 4X4 \u003cstrong\u003eKING SERIES\u003c\/strong\u003e BULL BAR to suit MITSUBISHI TRITON MR 2019 - Current. This heavy duty and stylish bull bar is sure to make statement once fitted to your ute!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport for all factory sensors!\u003c\/li\u003e\n\u003cli\u003eMatte black powder coated finish!\u003c\/li\u003e\n\u003cli\u003eADR certification\u003c\/li\u003e\n\u003cli\u003eAir bag compliance\u003c\/li\u003e\n\u003cli\u003eWinch compatibility\u003c\/li\u003e\n\u003cli\u003eTow points\u003c\/li\u003e\n\u003cli\u003eLED fog lights\u003c\/li\u003e\n\u003cli\u003eLED indicators\u003c\/li\u003e\n\u003cli\u003eLED daytime running lights\u003c\/li\u003e\n\u003cli\u003eLED position lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle and 3 piece bash plates\u003c\/li\u003e\n\u003cli\u003eShackles to suit bull bar\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamer","offers":[{"title":"Default Title","offer_id":50266804584705,"sku":"AM106-T19","price":2500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/MR-TRITON-ATLAS.jpg?v=1788354559"},{"product_id":"aluminium-tool-box-3-4-opening-with-shelf-1400x500x700","title":"Aluminium Tool box 3\/4 Opening with Shelf 1400x500x700","description":"\u003cp\u003eBrand new HEAVY DUTY Checker plate Aluminium tool box\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1400mm Length 500mm width 700mm height\u003c\/li\u003e\n\u003cli\u003e3\/4 Opening, with an adjustable and removable shelf\u003c\/li\u003e\n\u003cli\u003e1060# grade aluminium\u003c\/li\u003e\n\u003cli\u003eGas struts supporting full stainless steel piano hinges\u003c\/li\u003e\n\u003cli\u003eWeather proof rubber seal\u003c\/li\u003e\n\u003cli\u003e2 Heavy duty stainless steel T locks, all operable with a single key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266806092033,"sku":"1400-TOOLBOX-3\/4","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/IMG_0067-scaled.jpg?v=1788354596"},{"product_id":"mitsubishi-triton-mq-2015-2019-nudge-bar-with-bash-plate-matte-black","title":"Mitsubishi Triton MQ 2015 to 2019 Nudge Bar with Bash Plate Matte Black","description":"\u003cp\u003eBrand new MATTE BLACK Powder Coated 3” nudge bar with bash plate \/ skid plate\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits all MITSUBISHI TRITON MQ 2015 - 2019 models, will NOT suit facelift MR Triton 2019 - onwards models\u003c\/li\u003e\n\u003cli\u003eCompatible with all vehicular sensors\u003c\/li\u003e\n\u003cli\u003eIncludes integrated LED Light bar \/ Spot light mounting holes (400mm apart on top of pipe)\u003c\/li\u003e\n\u003cli\u003eIncludes mounting brackets, bolts, nuts and installation manual\u003c\/li\u003e\n\u003cli\u003eEasy installation with a perfect fit no drilling required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266806124801,"sku":"MITSUBISHI-TRITON-MQ-NBAR","price":275.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-3-scaled_f467064c-436f-40b6-8ef1-0e3fe6144f97.jpg?v=1788354595"},{"product_id":"mitsubishi-triton-mq-mr-2015-current-canopy-lift-up-panels-central-locking","title":"Mitsubishi Triton MQ MR 2015 to 01\/2024 Canopy Lift Up Panels Central locking","description":"\u003cp\u003eAdd lockable storage to your Mitsubishi Triton MQ or MR dual cab (2015 to 01\/2024) with this fibreglass canopy from Oz Canopies \u0026amp; 4x4. It features central locking on all doors, dual lift up side panels and a full glass rear door for better visibility. The vinylester resin shell is built for extra strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSide access: dual lift up panels on both sides put tools and gear within reach.\u003c\/li\u003e\n\u003cli\u003eCentral locking on all doors: one key suits every door, with spare keys supplied.\u003c\/li\u003e\n\u003cli\u003eFull glass rear door: better rear visibility, with gas struts and an internal release.\u003c\/li\u003e\n\u003cli\u003eRack ready roof: Australian custom designed ceiling reinforcements support heavy duty racks or crossbars, and the roof is rated to 100 kg dynamic and 200 kg static.\u003c\/li\u003e\n\u003cli\u003eFinished interior: full vinyl lining, LED interior light and high level LED brake light.\u003c\/li\u003e\n\u003cli\u003eSecure fit: an inlaid heavy duty aluminium rail and rust resistant stainless steel clamps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits all Mitsubishi Triton MQ and MR dual cab models from 2015 to 01\/2024, petrol and diesel.\u003c\/li\u003e\n\u003cli\u003eWhite as standard, with colour coding to your paint code available at no additional cost.\u003c\/li\u003e\n\u003cli\u003e3 year warranty on the fibreglass shell and 12 months on moving hardware (glass not covered). Extended warranty available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266809139457,"sku":"MQ-MR-EXTRACAB-CANOPY","price":3199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-8-scaled.jpg?v=1788354647"},{"product_id":"mitsubishi-triton-mq-mr-2015-current-electric-roller-shutter-tonneau-cover-lid-egr-rolltrac","title":"Mitsubishi Triton MQ MR 2015 to 01\/2024 Electric Roller Shutter Tonneau Cover Lid EGR Rolltrac","description":"\u003cp\u003eCover your tub with the EGR RollTrac electric roller shutter for the Mitsubishi Triton MQ and MR dual cab (2015 to 01\/2024). It opens and closes at the touch of a button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePush button operation: buttons in the rear corners open and close the cover, so there's no extra remote on your key ring.\u003c\/li\u003e\n\u003cli\u003eInterlocking aluminium slats: built to resist knife slash attacks.\u003c\/li\u003e\n\u003cli\u003eWater management: four large drain ports with model specific moulded tubing clear up to 150 litres per minute.\u003c\/li\u003e\n\u003cli\u003eAccessory ready: a universal T channel runs along each side rail for mounting accessories, rated to 100 kg dynamic and 150 kg static.\u003c\/li\u003e\n\u003cli\u003eSmart electronics: a vehicle specific ECU integrates with your ute's wiring and limits power use if the battery runs low.\u003c\/li\u003e\n\u003cli\u003eTough finish: scratch resistant, lightly textured, UV stable black powder coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits the Mitsubishi Triton MQ and MR from 2015 to 01\/2024. Only available for dual cab models.\u003c\/li\u003e\n\u003cli\u003eFactory sports bar? Add the optional EGR RollTrac sports bar adaptor kit.\u003c\/li\u003e\n\u003cli\u003eThis unit does not include tailgate locking.\u003c\/li\u003e\n\u003cli\u003eOptional dust defence kits seal the tailgate; fitted plastic tub liners need trimming to suit.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3 year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EGR","offers":[{"title":"Default Title","offer_id":50266810908929,"sku":"TRT15-RTRAC-DC-E","price":3599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-3-scaled_9a269e8a-2476-4765-aff6-b71e43d60702.jpg?v=1788354669"},{"product_id":"mitsubishi-triton-mq-mr-2015-to-current-aluminium-hard-lid-tonneau-cover-egr-load-shield-matte-black","title":"Mitsubishi Triton MQ MR 2015 to 01\/2024 Aluminium Hard Lid Tonneau Cover EGR Load Shield Matte Black","description":"\u003cp\u003e\u003cstrong\u003eFree delivery to business addresses.\u003c\/strong\u003e Delivering to a home? Please add \u003ca href=\"\/products\/residential-delivery\"\u003eResidential delivery\u003c\/a\u003e ($200) to your order, or we can’t send your lid.\u003c\/p\u003e\n\u003cp\u003eLock away your gear with the EGR Load Shield aluminium hard lid for the Mitsubishi Triton MQ and MR dual cab (2015 to 01\/2024). Checker plate aluminium over an internal frame makes a strong, durable cover, and twin gas struts make it easy to open. It is not compatible with a sports bar or cabin guard, which must be removed before fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong construction: checker plate aluminium over an internal frame for a robust, durable lid.\u003c\/li\u003e\n\u003cli\u003eFully lockable: keeps your tools and gear secure.\u003c\/li\u003e\n\u003cli\u003eEasy opening: twin gas struts lift the lid with little effort.\u003c\/li\u003e\n\u003cli\u003eWeather resistant: helps protect your cargo from the elements.\u003c\/li\u003e\n\u003cli\u003eMatte black finish: powder coated for style and protection.\u003c\/li\u003e\n\u003cli\u003eReady to fit: complete installation kit included.\u003c\/li\u003e\n\u003cli\u003eRack options: add side rails and cross bars to carry gear on top.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits all dual cab Mitsubishi Triton MQ and MR models from 2015 to 01\/2024. Any sports bar or cabin guard must be removed before fitting.\u003c\/li\u003e\n\u003cli\u003eSide rails, cross bars and a cross bars and tracks kit are available separately.\u003c\/li\u003e\n\u003cli\u003eRated to carry 100 kg dynamic and 200 kg static on top only with the cross bars and tracks kit fitted. With the anodised side rails, the load capacity is 50 kg dynamic and 100 kg static.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3 year warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree delivery to business addresses with a forklift on site.\u003c\/li\u003e\n\u003cli\u003eEvery delivery must be signed for, so someone needs to be there to receive it. Business addresses must be open on weekdays.\u003c\/li\u003e\n\u003cli\u003eMade to order: 5 to 10 business days to build, plus 5 to 15 business days for delivery.\u003c\/li\u003e\n\u003cli\u003eEGR can’t deliver to some rural areas. Message us to check your address.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EGR","offers":[{"title":"Default Title","offer_id":50266813464833,"sku":"TRITON-MQMR-EGR-LID","price":2129.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Untitled-design-6.jpg?v=1788354701"},{"product_id":"oztrax-electric-mitsubishi-triton-mq-mr-roller-shutter-cover-tonneau-hard-lid-2015-current","title":"Oztrax Electric Mitsubishi Triton MQ MR Roller Shutter Cover Tonneau Hard Lid 2015 to 01\/2024","description":"\u003cp\u003eSecure your tub with the OzTrax electric roller shutter for the Mitsubishi Triton MQ and MR dual cab from 2015 to 01\/2024, made for utes with no sports bar or a factory sports bar using our adapter kit. When open, you can reach the tub from all three sides with no limit on load height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemote control: open, close and stop it from up to 20 m with the key fob.\u003c\/li\u003e\n\u003cli\u003eInterlocking aluminium slats: built to resist knife slash attacks and to keep the weather out.\u003c\/li\u003e\n\u003cli\u003eWater management: two primary drain hoses clear over 50 litres per minute.\u003c\/li\u003e\n\u003cli\u003eSmart and safe: automatic low battery shut off and a built in anti pinch function.\u003c\/li\u003e\n\u003cli\u003eLED light: lights up the tub for night time work.\u003c\/li\u003e\n\u003cli\u003eTough build: matte black powder coat and a heavy duty motor tested to over 10,000 cycles.\u003c\/li\u003e\n\u003cli\u003eAccessory ready: side tracks take sports bars, cross bars and ladder racks, rated to 100 kg dynamic and 200 kg static.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits Triton MQ and MR GLX, GLX-R, GLS, GLS Premium, GSR and Exceed dual cab models from 2015 to 01\/2024, petrol or diesel.\u003c\/li\u003e\n\u003cli\u003eNeeded separately: the sports bar adapter kit if a factory sports bar is fitted. Tailgate central locking kits are available, plus an EGR dust defence kit for the MQ (2015 to 2018). No dust defence kit is available for the MR.\u003c\/li\u003e\n\u003cli\u003eBacked by a 24 month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266814087425,"sku":"MITSUBISHI-TRITON-MQMR-ROLLER-E","price":1999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Untitled-design-scaled_635669eb-b731-4a3f-9046-bea9dd4b2c3d.jpg?v=1788354758"},{"product_id":"universal-with-ecu-trailer-tow-bar-wiring-harness","title":"Universal Trailer Towbar Wiring Harness W\/ECU \u0026 7 Pin Flat Plug","description":"\u003cp\u003eEngineered for reliability and ease, the UNTEC2W is a universal 7-pin wiring harness designed to streamline trailer connectivity across a wide range of vehicles. Compatible with both 12V systems, this harness features an integrated ECU and electric brake “blue” cable, making it ideal for towing setups that demand precision and safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDual Voltage Compatibility: Supports both 12V systems—perfect for passenger vehicles and heavy-duty trucks.\u003c\/p\u003e\n\u003cp\u003eElectric Brake Ready: Pre-fitted with a dedicated blue cable for seamless electric brake integration.\u003c\/p\u003e\n\u003cp\u003eWaterproof \u0026amp; Low Current Draw: Built for durability in harsh conditions without compromising vehicle power.\u003c\/p\u003e\n\u003cp\u003eNo Dealer Coding Required: Simplifies installation—no activation or coding needed.\u003c\/p\u003e\n\u003cp\u003eUniversal Fit: Designed for broad compatibility, though not suitable for vehicles with shared brake and tail light wiring\u003c\/p\u003e\n\u003cp\u003eWhether you're upgrading your towing setup or fitting out a fleet, the UNTEC2W delivers dependable performance with minimal fuss. For best results, professional installation is recommended.\u003c\/p\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266814415105,"sku":"UNTEC2W+7PIN","price":175.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/UNTEC2W.webp?v=1788354768"},{"product_id":"mitsubishi-triton-mq-mr-towbar-2015-to-current-tub-body","title":"Mitsubishi Triton MQ MR Towbar 2015 to 01\/2024 Tub Body \u0026 Tray Back","description":"\u003cp\u003e\u003cstrong\u003eBTA Heavy Duty Towbars are designed and manufactured in Australia and feature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3100kg Towing capacity\u003c\/li\u003e\n\u003cli\u003e310kg ball load\u003c\/li\u003e\n\u003cli\u003eUtilisation of factory mounting Points for ease of fitment\u003c\/li\u003e\n\u003cli\u003eDurable Enamel dipped Finish\u003c\/li\u003e\n\u003cli\u003eClass 4, 50mm x 50mm Hitch Receiver\u003c\/li\u003e\n\u003cli\u003eBTA Limited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eTowbar includes - Tow Ball Mount, all nuts and bolts used to affix to the vehicle, Hitch Pin \u0026amp; R-Clip, D-Shackles and Tow ball!\u003c\/li\u003e\n\u003cli\u003eSuits Tub body with step \/ rear bumper models \u0026amp; Tray back cab chassis models\u003c\/li\u003e\n\u003cli\u003eFits all MITSUBISHI TRITON MQ MR 2015 TO CURRENT MODELS\u003c\/li\u003e\n\u003cli\u003eADR (Australian Design Rules) Compliant\u003c\/li\u003e\n\u003cli\u003eNote: Photo of tow bar used is for illustration purposes only\u003c\/li\u003e\n\u003cli\u003eNote: If a non - ecu wiring harness is listed as a check box option, your vehicle will not require an ECU module trailer wiring harness for general towing purposes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAs a BTA preferred distributor, you can rest assured that you are getting the best quality tow bar, manufactured and designed in Australia, at the best price!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266814480641,"sku":"MITS015H\/UNT010","price":679.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/MITS015H.jpg?v=1788354777"},{"product_id":"universal-trailer-towbar-wiring-harness-7-pin-flat-plug","title":"Universal Trailer Towbar Wiring Harness \u0026 7 Pin Flat Plug","description":"\u003cul\u003e\n\u003cli\u003eBrand new Tow bar \/ Trailer wiring harness kit\u003c\/li\u003e\n\u003cli\u003eSuits: All Vehicles with independent parker and brake wires (99% of non-European models), led and non-led tail lights. Some vehicles will require an ECU module (i.e most euro models) Please message us to confirm if you're not sure if your vehicle will need an ECU module.\u003c\/li\u003e\n\u003cli\u003eTo be used when fitting a new towbar or replacing\/upgrading an existing loom\u003c\/li\u003e\n\u003cli\u003eA 7-pin flat trailer plug is included in this kit\u003c\/li\u003e\n\u003cli\u003eDue to the nature of this, and all electrical products, we always recommend installation by a qualified mechanic or professional workshop. Wiring will need to be hard wired to the vehicles tail light cluster\u003c\/li\u003e\n\u003cli\u003eThis unit will not require dealer coding. If the vehicle has reverse sensors or stability control features, this unit will not connect to them. It is specifically designed to bypass the electronic control systems within the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266814513409,"sku":"UNT022","price":95.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/UNT022.1.webp?v=1788354777"},{"product_id":"mitsubishi-triton-mq-mr-towbar-2015-to-current-tray-back","title":"Mitsubishi Triton MQ MR Towbar 2015 to 2024 Tray Back","description":"\u003cp\u003e\u003cstrong\u003eTAG Heavy Duty Towbars are designed and manufactured in Australia and feature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3100kg Towing capacity\u003c\/li\u003e\n\u003cli\u003e310kg ball load\u003c\/li\u003e\n\u003cli\u003eUtilisation of factory mounting Points for ease of fitment\u003c\/li\u003e\n\u003cli\u003eDurable Enamel dipped Finish\u003c\/li\u003e\n\u003cli\u003eClass 4, 50mm x 50mm Hitch Receiver\u003c\/li\u003e\n\u003cli\u003eTAG Limited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eTowbar includes - Tow Ball Mount, all nuts and bolts used to affix to the vehicle, Hitch Pin \u0026amp; R-Clip, D-Shackles and Tow ball!\u003c\/li\u003e\n\u003cli\u003eSuits Tray back \/ Cab Chassis models ONLY\u003c\/li\u003e\n\u003cli\u003eFits all MITSUBISHI TRITON MQ MR 2015 TO 2024 MODELS\u003c\/li\u003e\n\u003cli\u003eADR (Australian Design Rules) Compliant\u003c\/li\u003e\n\u003cli\u003eNote: Photo of tow bar used is for illustration purposes only\u003c\/li\u003e\n\u003cli\u003eNote: If a non - ecu wiring harness is listed as a check box option, your vehicle will not require an ECU module equipped trailer wiring harness for general towing purposes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAs a TAG preferred distributor, you can rest assured that you are getting the best quality tow bar, manufactured and designed in Australia, at the best price!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266814546177,"sku":"T4C636\/UNT010","price":709.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/T4C636.webp?v=1788354781"},{"product_id":"plug-n-play-mitsubishi-triton-ml-mn-mq-towbar-trailer-wiring-harness-loom-with-relays","title":"Plug N Play Mitsubishi Triton ML MN MQ Towbar Trailer Wiring Harness Loom with Relays","description":"\u003cul\u003e\n\u003cli\u003eBrand new Tow bar \/ Trailer wiring harness kit\u003c\/li\u003e\n\u003cli\u003eSuits: MITSUBISHI TRITON ML MN MQ 11\/2005 to 10\/2018 (will not suit MR)\u003c\/li\u003e\n\u003cli\u003eIncludes everything needed to plug and play (including ECU module where applicable)\u003c\/li\u003e\n\u003cli\u003eTo be used when fitting a new towbar or replacing\/upgrading an existing loom\u003c\/li\u003e\n\u003cli\u003eA 7-pin flat trailer plug is included in this kit\u003c\/li\u003e\n\u003cli\u003eNote: the harness does not connect to or interact with any reversing systems (If fitted). Photo used is for illustration purposes only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266815103233,"sku":"UNT263\/032","price":140.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/UNT263.webp?v=1788354821"},{"product_id":"plug-n-play-mitsubishi-triton-mr-10-2018-current-towbar-trailer-wiring-harness-loom-with-ecu","title":"Plug N Play Mitsubishi Triton MR 10\/2018 to 2024 Towbar Trailer Wiring Harness Loom with ECU","description":"\u003cul\u003e\n\u003cli\u003eBrand new Tow bar \/ Trailer wiring harness kit\u003c\/li\u003e\n\u003cli\u003eSuits: MITSUBISHI TRITON MR 10\/2018 - 2024 (will not suit outgoing MQ model or new MV model)\u003c\/li\u003e\n\u003cli\u003eIncludes everything needed to plug and play (including ECU module where applicable)\u003c\/li\u003e\n\u003cli\u003eTo be used when fitting a new towbar or replacing\/upgrading an existing loom\u003c\/li\u003e\n\u003cli\u003eA 7-pin flat trailer plug is included in this kit\u003c\/li\u003e\n\u003cli\u003eNote: the harness does not connect to or interact with any reversing systems (If fitted). Photo used is for illustration purposes only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266815136001,"sku":"UNT343\/032","price":270.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/UNT343.webp?v=1788354821"},{"product_id":"aluminium-tool-box-full-opening-with-removable-adjustable-shelf-1750x530x820","title":"Aluminium Tool box Full Opening with removable \u0026 adjustable shelf 1750x530x820","description":"\u003cp\u003eBrand new HEAVY DUTY Checker plate Aluminium tool box\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1750mm Length 530mm width 820mm height\u003c\/li\u003e\n\u003cli\u003e1 shelf which is fully adjustable and removable\u003c\/li\u003e\n\u003cli\u003e1060# grade aluminium\u003c\/li\u003e\n\u003cli\u003eGas struts supporting full stainless steel piano hinges\u003c\/li\u003e\n\u003cli\u003eWeather proof rubber seal\u003c\/li\u003e\n\u003cli\u003e2 Heavy duty stainless steel T locks, all operable with a single key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266815693057,"sku":"1750-TOOLBOX-FULL","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/10-scaled_ba625e18-086f-4de1-a830-e3cf70bafd9d.jpg?v=1788354864"},{"product_id":"mitsubishi-triton-mr-2018-current-gls-gls-premium-gsr-trims-tailgate-central-locking-kit","title":"Mitsubishi Triton MR 2018 to Current (GLS GLS Premium GSR Trims) Tailgate Central Locking Kit","description":"\u003cp\u003eOz Canopies \u0026amp; 4x4 is proud to introduce our new line of tailgate central locking systems!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll our systems use your existing factory key fob, integrating with the existing central locking functions of your vehicle\u003c\/li\u003e\n\u003cli\u003eThe tailgate central locking system includes the wiring harness, actuator and all required brackets\u003c\/li\u003e\n\u003cli\u003eIncludes a laser-cut actuator bracket, so no additional drilling into the vehicle's metal tailgate is required. It will use the existing mounting fixtures\u003c\/li\u003e\n\u003cli\u003ePre-bent actuator rod so no additional fabrication is required\u003c\/li\u003e\n\u003cli\u003eNote: central locking wiring will need to be hardwired to vehicles wiring harness\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuits all Mitsubishi Triton MR 2018 to Current models with rectangular chrome \/ black trim around tailgate handle (GLS \/ GLS Premium \/ GSR models) Will NOT suit models that have the small handle with no trimming!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAlso available for models with the small handle \/ no trimming (GLX, GLX-R models) on tailgate, please check the tailgate central locking category on this site\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266815824129,"sku":"MR-BIG-HNDL","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Cut-scaled.jpg?v=1788354875"},{"product_id":"mitsubishi-triton-mq-mr-2015-current-suits-all-mq-mr-glx-glx-r-only-tailgate-central-locking-kit-small-handle","title":"Mitsubishi Triton MQ MR 2015 to 12\/2023 Tailgate Central Locking Kit","description":"\u003cp\u003eOz Canopies \u0026amp; 4x4 is proud to introduce our new line of tailgate central locking systems!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll our systems use your existing factory key fob, integrating with the existing central locking functions of your vehicle\u003c\/li\u003e\n\u003cli\u003eThe tail gate central locking system includes the wiring harness, actuator and all required brackets\u003c\/li\u003e\n\u003cli\u003eIncludes a laser cut actuator bracket, so no additional drilling into the vehicles metal tailgate required. It will use the existing mounting fixtures\u003c\/li\u003e\n\u003cli\u003ePre-bent actuator rod so no additional fabrication required\u003c\/li\u003e\n\u003cli\u003eNote: central locking wiring will need to be hardwired to vehicles wiring harness\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuits ALL Mitsubishi Triton MQ \u0026amp; MR 2015 - 12\/2023 models! All trim levels\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266815856897,"sku":"MITSUBISH-TRITON-MQMR-CL","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1_91fdfecd-0bbd-473f-92b7-6ca5491b148b.jpg?v=1788354874"},{"product_id":"stingray-super-heavy-duty-steel-side-steps-running-boards-mitsubishi-triton-mq-mr-2015-current","title":"Stingray Super Heavy Duty Steel Side Steps Running Boards Mitsubishi Triton MQ MR 2015 to 2023","description":"\u003cp\u003eIntroducing the Oz Canopies \u0026amp; 4x4 robust heavy duty body mounted side step, a super heavy duty alternative to traditional alloy step boards!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair with the driver and passenger side steps\u003c\/li\u003e\n\u003cli\u003eSide Steps offer vehicle protection from stones, mud or whatever else the wheels throw up, protecting your vehicle from damage as the step covers the whole length of the vehicle sill\u003c\/li\u003e\n\u003cli\u003eComplete fitting kit with easy to follow fitting instructions\u003c\/li\u003e\n\u003cli\u003eMade of Super Heavy Duty matte Black Steel\u003c\/li\u003e\n\u003cli\u003eMounting brackets are E-Coated for rust resistance before powder coating. High tech manufacturing process to ensure the smoothest fit and finish\u003c\/li\u003e\n\u003cli\u003eSteps can support 150kg of weight per side! (note: manufacturers ratings may be lower)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuits all DUAL CAB MITSUBISHI TRITON MQ MR 2015 - 2023 models\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266819854593,"sku":"MITSUBISHI-TRITON-MQMR-SHARK-SIDESTEPS","price":389.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/stingray-side-step-1_d3342c2b-fe3a-4754-a5e2-1d5923c964a3.jpg?v=1788354963"},{"product_id":"aluminium-half-toolbox-half-dogbox-1770mm-x-690mm-x-860mm","title":"Aluminium half Toolbox half dogbox 1770mm x 690mm x 860mm","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eBrand new HEAVY DUTY Checker plate Aluminium tool box \/ Dog box\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1770mm Wide (across the tray) x 690mm Length (along the tray) x 860mm Height\u003c\/li\u003e\n\u003cli\u003eBuilt around a square hollow section frame - Very strong roof\u003c\/li\u003e\n\u003cli\u003eFull rubber seal on tool box side\u003c\/li\u003e\n\u003cli\u003eNo floor on Dog box side\u003c\/li\u003e\n\u003cli\u003ePair of T locks keyed alike\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266819985665,"sku":"DOGBOX","price":870.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/6.1-scaled.jpg?v=1788354982"},{"product_id":"aluminium-toolbox-3-4-opening-with-2-bottom-drawers-1450x530x820","title":"Aluminium Toolbox 3\/4 Opening with 2 bottom drawers 1450x530x820","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eBrand new HEAVY DUTY Checker plate Aluminium tool box\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1450mm long x 530mm wide x 820mm high\u003c\/li\u003e\n\u003cli\u003eInternal shelf which is height adjustable and removable\u003c\/li\u003e\n\u003cli\u003eFull rubber seal on door and all drawers\u003c\/li\u003e\n\u003cli\u003eAll T locks keyed alike\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266820018433,"sku":"1450-TOOLBOX-3\/4","price":999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-1-scaled_9c05b4e1-014b-4369-8d29-1085b6af074b.jpg?v=1788354984"},{"product_id":"universal-dual-cab-oz-tub-rack","title":"Universal Dual Cab Oz Tub Rack","description":"\u003cp\u003eKeep full use of your ute tub and add extra carrying space with the Oz Tub Rack, a universal half rack style tub rack in black powder coated steel to suit most dual cab utes. It bolts directly to the tub or fits to one of our roller shutters, giving you a spot for an awning, roof top tent or extra gear while still running a roof rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoad rated: 200 kg dynamic and 400 kg static when bolted to the tub, or 100 kg dynamic and 200 kg static when fitted to one of our roller shutters.\u003c\/li\u003e\n\u003cli\u003eDirect mount: designed for an easy DIY direct mount install.\u003c\/li\u003e\n\u003cli\u003eInternal cross members: internal cross member bars add extra support.\u003c\/li\u003e\n\u003cli\u003eModular fit: modular height and width to suit most dual cab utes.\u003c\/li\u003e\n\u003cli\u003eBlack powder coated steel: steel construction with a black powder coat for longer durability.\u003c\/li\u003e\n\u003cli\u003eHalf rack style: the rack does not exceed the height of the roof.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits most dual cab utes. The width adjusts from 1335.6 mm to 1585.6 mm, with height settings of 254.2 mm, 304.3 mm and 354.4 mm and a length of 1382.4 mm. Check these against your ute before ordering.\u003c\/li\u003e\n\u003cli\u003eBolts to the tub, or fits to one of our roller shutters. It may not suit other brands of roller shutter.\u003c\/li\u003e\n\u003cli\u003eThis is a half rack style tub rack and will not sit higher than the roof.\u003c\/li\u003e\n\u003cli\u003eCovered by a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266820051201,"sku":"TUB-RACK","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/6-2-scaled_9f40a1e0-376b-48d4-99f4-cee5233284ea.jpg?v=1788354988"},{"product_id":"heavy-duty-aluminium-side-steps-running-boards-mitsubishi-triton-mq-mr-2015-current","title":"Heavy Duty Aluminium Side Steps Running Boards Mitsubishi Triton MQ MR 2015 to 2023","description":"\u003cp\u003eIntroducing the Oz Canopies \u0026amp; 4x4 robust heavy duty body mounted side step, a heavy duty solution for hard to access utes!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair with the driver and passenger side steps\u003c\/li\u003e\n\u003cli\u003eSide Steps offer vehicle protection from stones, mud or whatever else the wheels throw up, protecting your vehicle from damage as the step covers the whole length of the vehicle sill\u003c\/li\u003e\n\u003cli\u003eComplete fitting kit with easy to follow fitting instructions\u003c\/li\u003e\n\u003cli\u003eMade of heavy duty Alloy\u003c\/li\u003e\n\u003cli\u003eMounting brackets are E-Coated for rust resistance before powder coating. High tech manufacturing process to ensure the smoothest fit and finish\u003c\/li\u003e\n\u003cli\u003eSteps can support 150kg of weight per side! (note: manufacturers ratings may be lower)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuits all DUAL CAB \u003cstrong\u003eMITSUBISHI TRITON MQ MR 2015- 2023\u003c\/strong\u003e\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266820477185,"sku":"MITSUBISHI-TRITON-MQMR-S4-SIDESTEPS","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1.1-3-scaled_05fcc11b-9525-4ace-b475-34203e1cf124.jpg?v=1788355020"},{"product_id":"heavy-duty-aluminium-side-steps-running-boards-mitsubishi-triton-mq-mr-2015-current-2","title":"Heavy Duty Aluminium Side Steps Running Boards Mitsubishi Triton MQ MR 2015 to 2023","description":"\u003cp\u003eIntroducing the Oz Canopies \u0026amp; 4x4 robust heavy duty body mounted side step, a heavy duty solution for hard to access utes!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair with the driver and passenger side steps\u003c\/li\u003e\n\u003cli\u003eSide Steps offer vehicle protection from stones, mud or whatever else the wheels throw up, protecting your vehicle from damage as the step covers the whole length of the vehicle sill\u003c\/li\u003e\n\u003cli\u003eComplete fitting kit with easy to follow fitting instructions\u003c\/li\u003e\n\u003cli\u003eMade of heavy duty Alloy\u003c\/li\u003e\n\u003cli\u003eMounting brackets are E-Coated for rust resistance before powder coating. High tech manufacturing process to ensure the smoothest fit and finish\u003c\/li\u003e\n\u003cli\u003eSteps can support 150kg of weight per side! (note: manufacturers ratings may be lower)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuits all DUAL CAB \u003cstrong\u003eMITSUBISHI TRITON MQ MR 2015- 2023\u003c\/strong\u003e\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266820772097,"sku":"MQ-MR-XR","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/A_c10c4ba2-93c7-4b3d-a1bd-e2072de390c5.jpg?v=1788355040"},{"product_id":"premium-weather-shields-window-visors-mq-mr-triton-2015-current","title":"Premium Weather Shields Window Visors MQ MR Triton 2015 to 2023","description":"\u003cp\u003eTired of ill fitting weather shields that leave unsightly gaps and eventually fall off? Don't want to pay the ridiculous price dealers charge for genuine weather shields? Well look no further than Oz Canopies \u0026amp; 4x4's new line of premium weather shields!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality injection molded plastic, with dimensions determined from full vehicle laser scans. This is what makes our weathershields fit so much nicer!\u003c\/li\u003e\n\u003cli\u003eGenuine 3M tape provided to ensure correct fitment and adhesion! (We recommend an adhesion primer for the strongest adhesion)\u003c\/li\u003e\n\u003cli\u003eQuick and easy no drill install\u003c\/li\u003e\n\u003cli\u003eWater proof!\u003c\/li\u003e\n\u003cli\u003eFull set of 4 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll dual cab Mitsubishi Triton MQ MR Triton 2015 - 2023\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266821099777,"sku":"MITSUBISHI-TRITON-MQMR-WEATHER-SHIELDS","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-2-scaled_f574f66f-0c3a-4744-821d-5687b40bc9c1.jpg?v=1788355063"},{"product_id":"premium-door-cladding-door-protector-mq-mr-triton-2015-current","title":"Premium Door Body Cladding Door Protector MQ MR Triton 2015 - 2024","description":"\u003cp\u003eLooking to add some more aggression to the stance of your ute? Or perhaps some door protection to stop those pesky shopping centre car park dings? Oz Canopies \u0026amp; 4X4 have got you covered with our range of premium door cladding!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly quality injection molded, UV stabilised matte black ABS plastic, with dimensions determined from full vehicle laser scans. This is what makes our door protection fit so much nicer!\u003c\/li\u003e\n\u003cli\u003eGenuine 3M tape provided to ensure correct fitment and adhesion! (We recommend an adhesion primer for the strongest adhesion)\u003c\/li\u003e\n\u003cli\u003eVery high resistance to fading, warping or cracking\u003c\/li\u003e\n\u003cli\u003eQuick and easy no drill install\u003c\/li\u003e\n\u003cli\u003eFull set of 4 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll dual cab Mitsubishi MQ MR Triton 2015 - 2024 (Will not suit 2024+ MV models)\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266821132545,"sku":"MITSUBISHI-TRITON-MR-CLADDING","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/2-3-scaled_10ea114c-382d-4dee-8fc2-9b8d61d1948b.jpg?v=1788355065"},{"product_id":"mitsubishi-triton-mr-matte-black-bonnet-hood-scoop","title":"Mitsubishi Triton MR Matte Black Bonnet Hood Scoop","description":"\u003cp\u003eA little more aggression in the stance of your ute is never a bad thing! This bonnet scoop, will do just that!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly quality fit and finish! No unsightly gaps and fitment struggles common with other bonnet scoops at this great price.\u003c\/li\u003e\n\u003cli\u003eHighly quality injection molded, UV stabilised matte black ABS plastic, with dimensions determined from full vehicle laser scans. This is what makes our bonnet scoops so much nicer!\u003c\/li\u003e\n\u003cli\u003eFull fitting kit included, utilising genuine 3M double sided tape (We recommend an adhesion primer for the strongest adhesion)\u003c\/li\u003e\n\u003cli\u003eManufactured from high quality UV stabilised ABS plastic, with very high resistance to fading, cracking or warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll MITSUBISHI TRITON MR 2018 - Current models\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266821165313,"sku":"MITSUBISHI-TRITON-MR-SCOOP","price":449.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Untitled-design-1-scaled_61d1c625-45c6-4950-8bef-e87df31ce07b.jpg?v=1788355070"},{"product_id":"mitsubishi-triton-mr-2018-current-fender-flares-bolt-on-style","title":"Mitsubishi Triton MR 2018 to 01\/2024 Fender Flares Bolt On Style","description":"\u003cp\u003eTired of ill fitting aftermarket flares and the price of OEM flares? Looking for high quality fender flares that aren't going to break the bank? Look no further than Oz Canopies \u0026amp; 4X4's fender flares available for a wide range of dual cab utes!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality fit and finish! No unsightly gaps and fitment struggles common with other flares at this great price.\u003c\/li\u003e\n\u003cli\u003eUtilisation of existing vehicle attachment points, no drilling involved!\u003c\/li\u003e\n\u003cli\u003eComes with a full fitting kit, using genuine 3M tape (bolts are cosmetic only, we recommend an adhesion primer for the strongest adhesion)\u003c\/li\u003e\n\u003cli\u003eManufactured from high quality UV stabilised MATTE BLACK ABS plastic, with very high resistance to fading, cracking or warping.\u003c\/li\u003e\n\u003cli\u003e6 pieces, perfect for vehicles fitted with bull bars\u003c\/li\u003e\n\u003cli\u003eFlares add 47mm to each guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll dual cab MITSUBISHI MR TRITON models 2018 - 01\/2024\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266821198081,"sku":"MITSUBISHI-TRITON-MR-BOLT-FLARES","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/6-3-scaled_229c6fd5-e305-4a39-b2a6-d85ac9b22359.jpg?v=1788355077"},{"product_id":"premium-bonnet-protector-guard-mr-triton-2018-current","title":"Premium Bonnet Protector Guard MR Triton 2018 to Current","description":"\u003cp\u003eLooking to add some more aggression to the stance of your ute? Or perhaps some bonnet protection from all those stones bouncing around on Australian roads? Look no further than Oz Canopies \u0026amp; 4x4's premium bonnet protectors available for a wide range of utes!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly quality injection moulded, UV stabilised tinted black plastic, with dimensions determined from full vehicle laser scans. This is what makes our bonnet protectors fit so much nicer!\u003c\/li\u003e\n\u003cli\u003eFull fitting kit supplied\u003c\/li\u003e\n\u003cli\u003eVery high resistance to fading, warping or cracking\u003c\/li\u003e\n\u003cli\u003eQuick and easy no drill install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll Mitsubishi MR Triton 2018 - Current (Will also suit Pajero sport QF 2020 - Current)\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266821230849,"sku":"MITSUBISHI-TRITON-MR-BONNET-PROTECTOR","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/6-2-scaled_842d8ac8-a36a-48bf-a8f1-dfaef842f265.jpg?v=1788355078"},{"product_id":"universal-adjustable-ladder-rack-for-tray","title":"Universal Adjustable Ladder Rack For Tray","description":"\u003cp\u003eCarry ladders and long loads above your tray with this universal adjustable ladder rack, made for tray back utes rather than tubs. It is made from heavy duty 304 grade stainless steel in 3 inch pipe with a polished finish and is rated to 150 kg dynamic and 300 kg static. The load area adjusts from 770 mm up to 925 mm above the tray top. It suits trays at least 1760 mm wide, and a full fitting kit is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade for trays: suits trays with a minimum width of 1760 mm.\u003c\/li\u003e\n\u003cli\u003e304 stainless steel: heavy duty 304 grade stainless steel in 3 inch pipe with a polished finish.\u003c\/li\u003e\n\u003cli\u003eLoad rated: rated to 150 kg dynamic and 300 kg static.\u003c\/li\u003e\n\u003cli\u003eAdjustable height: set the load area anywhere from 770 mm to 925 mm above the tray top.\u003c\/li\u003e\n\u003cli\u003eTie down points: integrated tie down points help you secure your load.\u003c\/li\u003e\n\u003cli\u003eComplete kit: a full fitting kit is included, so there is nothing more to buy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits trays with a minimum width of 1760 mm. Measure your tray before ordering.\u003c\/li\u003e\n\u003cli\u003eFull fitting kit included, nothing more to buy.\u003c\/li\u003e\n\u003cli\u003eCovered by a 12 month warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is available. Request a fitting quote and our team will be in touch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266822443265,"sku":"LADDER-RACK-TRAY","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1.1.jpg?v=1788355136"},{"product_id":"sensor-compatible-mr-triton-2018-current-nudge-bar-matte-black","title":"Sensor Compatible MR Triton 2018 to 2024 Nudge Bar Matte Black","description":"\u003cp\u003eBrand new MATTE BLACK Powder Coated 3” nudge bar\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront parking sensor compatible! Don't waste time with other inferior nudge bars or pay the genuine premium!\u003c\/li\u003e\n\u003cli\u003eSuits all MITSUBISHI TRITON MR 2018 - 2024\u003c\/li\u003e\n\u003cli\u003eIncludes integrated LED Light bar \/ Spot light mounting holes (360mm apart on top of pipe)\u003c\/li\u003e\n\u003cli\u003eIncludes mounting brackets, bolts and nuts\u003c\/li\u003e\n\u003cli\u003eEasy installation with a perfect fit no drilling required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266823885057,"sku":"MITSUBISHI-TRITON-MR-B-NBAR","price":275.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/1-7-scaled.jpg?v=1788355171"},{"product_id":"adjustable-heavy-duty-tow-ball-mount-90-face-50mm-square-hitch","title":"Adjustable Heavy Duty Tow Ball Mount 90° Face, 50mm Square Hitch","description":"\u003cp\u003eThe TAG Adjustable Tow Ball Mount features a heavy-duty 50mm square shank with multiple pin holes for horizontal and vertical adjustment to suit your towing setup.\u003c\/p\u003e\n\u003cp\u003eFor full compatibility, the unit includes a reducer allowing the use of a 70mm or 50mm tow ball. Made from steel with a durable powder-coated finish that resists rust, corrosion, and chipping.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90° Separate Tongue Face with four adjustable positions.\u003c\/li\u003e\n\u003cli\u003eDrop 115mm\u003c\/li\u003e\n\u003cli\u003eCan be mounted in Drop Mode or Rise Mode to raise or lower the tow ball\u003c\/li\u003e\n\u003cli\u003eFits 70mm tow ball (or 50mm tow ball using included reducer)\u003c\/li\u003e\n\u003cli\u003eGross Trailer Weight 4500kg (70mm Tow Ball) \/ 3500kg (50mm Tow Ball)\u003c\/li\u003e\n\u003cli\u003eBall Weight 450kg (70mm Tow Ball) \/ 350kg (50mm Tow Ball)\u003c\/li\u003e\n\u003cli\u003eDurable Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eADR 62\/02 Compliant\u003c\/li\u003e\n\u003cli\u003eTAG Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTow Ball, R-Clip \u0026amp; Hitch Pin are sold separately. Always check your vehicle and towbar's maximum towing capacity.\u003c\/p\u003e","brand":"TAG","offers":[{"title":"Default Title","offer_id":50266824114433,"sku":"UNTTBM450","price":310.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Adjustable-Heavy-Duty-Tow-Ball-Mount-90_C2_B0-Face-50mm-Square-Hitch.jpg?v=1788355191"},{"product_id":"adjustable-tow-ball-mount-297mm-long-90-face-50mm-square-hitch-copy","title":"Adjustable Tow Ball Mount 297mm Long, 90° Face, 50mm Square Hitch","description":"\u003cp\u003eTAG Tow Ball Mounts are manufactured using drop forged steel, CNC milled and robotically welded for precision and consistency. Designed to accompany the TAG Heavy Duty Towbar, fitting a 50mm Square Hitch Receiver and available in multiple drop\/rise or adjustable configurations. All TAG Tow Ball Mounts are ADR compliant, batch marked and powder-coated for a premium, durable finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e297mm Long (Centre Pin Hole to Tow Ball Hole)\u003c\/li\u003e\n\u003cli\u003e90° Tongue Face\u003c\/li\u003e\n\u003cli\u003eDrop: 135mm\u003c\/li\u003e\n\u003cli\u003eCan be mounted in Drop Mode or Rise Mode (refer to info sheet for correct use)\u003c\/li\u003e\n\u003cli\u003e3500kg Gross Trailer Weight\u003c\/li\u003e\n\u003cli\u003e350kg Ball Weight\u003c\/li\u003e\n\u003cli\u003eDurable Powder-Coated Finish\u003c\/li\u003e\n\u003cli\u003eADR 62\/02 Compliant\u003c\/li\u003e\n\u003cli\u003eTAG Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTow Ball, R-Clip \u0026amp; Hitch Pin sold separately.\u003c\/p\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266824147201,"sku":"L4435","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Adjustable-Tow-Ball-Mount-297mm-Long-90_C2_B0-Face-50mm-Square-Hitch.jpg?v=1788355195"},{"product_id":"adjustable-weight-distribution-shank-50mm-square-hitch-50mm-drop4-5t","title":"Adjustable Weight Distribution Shank 50mm Square Hitch, 50mm Drop (4.5T)","description":"\u003cp\u003eThis Weight Distribution Shank can be used with TAG or CURT Weight Distribution Systems with a maximum 4.5T tow rating. It has multiple holes and a 50mm drop for adjustment and can be used in either drop mode or rise mode. The shank is made from steel with a durable powder-coated finish that resists rust, corrosion, and chipping.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50mm Square Hitch\u003c\/li\u003e\n\u003cli\u003eDrop Mode or Rise Mode\u003c\/li\u003e\n\u003cli\u003eFor use with TAG or CURT Weight Distribution Systems\u003c\/li\u003e\n\u003cli\u003eOverall Height 275mm\u003c\/li\u003e\n\u003cli\u003e50mm Drop\u003c\/li\u003e\n\u003cli\u003eMultiple Holes for adjustment\u003c\/li\u003e\n\u003cli\u003eDurable Powder-Coated Finish\u003c\/li\u003e\n\u003cli\u003eADR 62\/02 Compliant\u003c\/li\u003e\n\u003cli\u003eTAG Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266824179969,"sku":"WDHS-050","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Adjustable-Weight-Distribution-Shank-50mm-Square-Hitch-50mm-Drop-4.5T.jpg?v=1788355197"},{"product_id":"adjustable-weight-distribution-shank-50mm-square-hitch-standard-drop-4-5t","title":"Adjustable Weight Distribution Shank 50mm Square Hitch, Standard Drop (4.5T)","description":"\u003cp\u003eThis Weight Distribution Shank can be used with TAG or CURT Weight Distribution Systems with a maximum 4.5T tow rating. It has multiple holes for adjustment and can be used in either drop mode or rise mode. The shank is made from steel with a durable powder-coated finish that resists rust, corrosion, and chipping.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50mm Square Hitch\u003c\/li\u003e\n\u003cli\u003eDrop Mode or Rise Mode\u003c\/li\u003e\n\u003cli\u003eFor use with TAG or CURT Weight Distribution Systems\u003c\/li\u003e\n\u003cli\u003eOverall Height 225mm\u003c\/li\u003e\n\u003cli\u003eMultiple Holes for adjustment\u003c\/li\u003e\n\u003cli\u003eDurable Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eADR 62\/02 Compliant\u003c\/li\u003e\n\u003cli\u003eTAG Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oz Canopies \u0026 4x4","offers":[{"title":"Default Title","offer_id":50266824212737,"sku":"WDHS-000","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/files\/Adjustable-Weight-Distribution-Shank-50mm-Square-Hitch-Standard-Drop-4.5T.jpg?v=1788355200"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/5094\/2209\/collections\/Mitsubishi.jpg?v=1795014532","url":"https:\/\/www.ozcanopies.com.au\/collections\/mitsubishi.oembed","provider":"Oz Canopies \u0026 4x4","version":"1.0","type":"link"}